GB/T 30733-2014 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 30733-2014: Determination of total carbon, hydrogen and nitrogen content in coal -- Instrumental method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 30733-2014 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Determination of total carbon, hydrogen and nitrogen content in coal -- Instrumental method
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 30733-2014
GB/T 30733-2014: Determination of total carbon, hydrogen and nitrogen content in coal -- Instrumental method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT30733-2014
GB
ICS 73.040
D 21
NATIONAL STANDARD
Determination of total carbon, hydrogen and
nitrogen content in coal - Instrumental method
(ISO 29541.2010, Solid mineral fuels -- Determination of total carbon, hydrogen and
nitrogen content -- Instrumental method, MOD)
Issued on: JUNE 09, 2014
Implemented on: OCTOBER 01, 2014
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Method summary... 4
4 Reagents and materials... 4
5 Instruments and equipment... 5
6 Determination... 6
7 Calibration... 6
8 Results expression... 8
9 Precision of method... 9
10 Test report... 9
Foreword
This Standard is drafted in accordance with the rules specified in GB/T 1.1-2009.
This Standard uses re-drafting method to modify and adopt ISO 29541.2010 Solid Mineral
Fuels -- Determination of Total Carbon, Hydrogen and Nitrogen Content -- Instrumental
Method.
Compared with ISO 29541.2010, there is some adjustment in the structure. Annex A lists out
the comparison of chapter and article number between this Standard and ISO 29541.2010.
Compared with the ISO 29541.2010, there are technical differences; the involved clauses of
differences have been marked with single vertical line (|) along the lateral margin. Annex B
shows a list of the corresponding technical differences and their reasons.
This Standard was proposed by China National Coal Association.
The standard shall be centralized by SAC/TC 42, National Coal Standardization Technical
Committee of China.
Drafting organizations of this Standard. Branch of China Coal Research Institute, Shenhua
Trading Group Limited, and Changsha Kaiyuan Instruments Co., Ltd.
Main drafters of this Standard. Pi Zhongyuan, Li Ting, Zhang Quanjun, Wen Sheng, and Zhou
Yongwang.
Determination of total carbon, hydrogen and nitrogen
content in coal - Instrumental method
1 Scope
This Standard specifies the method summary, reagents and materials, instrument and
equipment, determination, calibration, results statement, accuracy etc. of determining carbon,
hydrogen and nitrogen in the coal by instrumental method. This Standard applies to quick
determination of carbon, hydrogen and nitrogen in lignite, bituminous coal and anthracite.
2 Normative references
The articles contained in the following documents have become this Standard when they
are quoted herein. For the dated documents so quoted, all the modifications (excluding
corrections) or revisions made thereafter shall not be applicable to this Standard. For the
undated documents so quoted, the latest editions shall be applicable to this Standard.
GB/T 212 Proximate analysis of coal
GB/T 218 Determination of carbon dioxide content in the mineral carbonates
associated with coal
GB/T 483 General rules for analytical and testing methods of coal
3 Method summary
A coal sample with known weight burns sufficiently in high temperature and oxygen flow. The
carbon, hydrogen and nitrogen in the coal can form carbon dioxide, water and
nitrogen/nitrogen oxide mixture. A specific disposal system is used to filter the factors which
affect the determination (e.g. sulfur, chlorine and other products of combustion), and reduce
the nitrogen oxide into nitrogen. The content of carbon, hydrogen and nitrogen in the coal is
quantitative determined by a specific detection system in the form of carbon dioxide, water
vapor and nitrogen.
4 Reagents and materials
4.1 Carrier gas. Choose the helium specified by the instrument’s instructions or other suitable
gas.
problems. Calibrate the instrument according to 7.2 when necessary. Determine the tested
values which have already be done before the check. The calibration check is recommended
at the beginning and at the end of each lot of samples. The calibration check shall be
conducted after every 10 times of sample determinations during the determination.
8 Results expression
8.1 Calculation of the hydrogen content in the coal
Calculation of the hydrogen content in the coal is calculated in accordance with the Formula (1).
Where.
Had-- The hydrogen content in the coal is valued by mass fraction (%);
Ht,ad-- The total hydrogen content measured by instrument is valued by mass fraction (%);
Mad-- The air-dried moisture content in the coal sample (determined by GB/T 212) is valued
by mass fraction (%).
8.2 Calculation of the organic carbon content in the coal
When determination of the organic carbon (Co,ad) is necessary, calculate it in accordance with
the Formula (2).
Where.
Co,ad-- The organic carbon content in the coal is valued by mass fraction (%);
Cad-- The total organic carbon content measured by instrument is valued by mass fraction (%);
(CO2)ad-- The content of carbon dioxide in carbonate (determined by GB/T 218) is valued
by mass fraction (%).
8.3 Results expression
The carbon, hydrogen and nitrogen content (valued by mass fraction, %) of the sample is
reported according to the average value after determined twice, accurate to 0.01% according
to GB/T 483.
Annex C
(Informative)
Examples of instrument calibration method
C.1 Determine the content range of carbon, hydrogen and nitrogen in the daily determined
coal. Determine the quantity of coal sample according to the instrument specification.
Calculate the content range of the calibration material according to Formula (C.1). If choosing
pure substance as the calibration substance, then take its metering data as the standard
values; if choosing certified coal standard substance as the calibration substance, then convert
the standard values to the air-dry basis value.
mstandard = m·x...(C.1) X standard
Where.
mstandard -- The unit of the sample weight of the calibration material, g;
m -- The unit of the sample weight specified in the instrument specification, g;
X-- Measurement range (%) of each element content;
Xstandard -- Standard value (%) of standard substance.
If choosing single-point calibration, then.
mstandard = m...(C.2)
C.2 Examples.
the carbon content range of the daily determined coal sample is 40.00%~70.00%; the
hydrogen content range is 3.00%~4.00%; the nitrogen content range is 0.60%~1.00%. The
specified sample weight in the instrument specification is 80mg. Choose EDTA as the
calibration material to fit the calibration curve of carbon and hydrogen. And choose the certified
coal standard substance as the calibration material to fit the calibration curve of the nitrogen.
EDTA's measuring value is carbon. 41.098%; Hydrogen. 5.518%. The standard values of the
certified coal standard substance is nitrogen. 0.82%.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 30733-2014 be delivered?Answer: The full copy PDF of English version of GB/T 30733-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 30733-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30733-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 30733-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 30733-2014?A step-by-step guide to download PDF of GB/T 30733-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 30733-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|