GB/T 2982-2024 PDF English
US$380.00 · In stock · Download in 9 secondsGB/T 2982-2024: Size designation, dimensions, inflation pressure and load capacity of pneumatic tyres for industrial vehicles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2982: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2982-2024 | English | 380 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Size designation, dimensions, inflation pressure and load capacity of pneumatic tyres for industrial vehicles
| Valid |
| GB/T 2982-2014 | English | 315 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Designation, dimensions, inflation pressure and load capacity of pneumatic tyres for industrial vehicles
| Valid |
| GB/T 2982-2001 | English | 639 |
Add to Cart
|
5 days
|
Designation, dimensions inflation pressure and load capacity of pneumatic tyres for industrial vehicles
| Obsolete |
| GB/T 2982-1991 | English | 319 |
Add to Cart
|
3 days
|
Series of industrial tyres
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2982-2024
GB/T 2982-2024: Size designation, dimensions, inflation pressure and load capacity of pneumatic tyres for industrial vehicles
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2982-2024
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.99
CCS G 41
GB/T 2982-2024
Replacing GB/T 2982-2014
Size designation, dimensions, inflation pressure and load
capacity of pneumatic tyres for industrial vehicles
Issued on: OCTOBER 26, 2024
Implemented on: MAY 01, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Representation of size designation of tyres... 5
5 Requirements... 7
Annex A (normative) Correspondence between speed and load capacity... 22
Annex B (normative) Correspondence between load index and load capacity... 24
Annex C (normative) Calculation and rounding off rules for new tyre maximum and
minimum peripheral dimensions... 25
Foreword
This document was drafted in accordance with the provisions of GB/T 1.1-2020
“Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents”.
This document replaces GB/T 2982-2014 “Designation, dimensions, inflation pressures
and load capacity of pneumatic tyres for industrial vehicles.” Compared with GB/T
2982-2014, in addition to structural adjustments and editorial changes, the main
technical changes are as follows.
- MODIFY the provisions for new tyre minimum overall width and new tyre
minimum overall diameter (see Tables 1 and 3 of this document; Tables 1 and 3 of
the 2014 edition);
- MODIFY the valve stem model for inner tubes used in some tyres (see Tables 1
and 5 of this document; Tables 1 and 5 of the 2014 edition);
- ADD the load capacity of 15 km/h drive wheel of some normal section diagonal
tyres (see Table 2 of this document);
- ADD the load capacity of 15 km/h drive wheel of some normal section radial tyres
(see Table 4 of this document);
- MODIFY the section width dimension of some low section diagonal tyres (see
Tables 5 and 7 of this document; Tables 5 and 7 of the 2014 edition);
- ADD the load capacity of 15 km/h drive wheel of some low section diagonal tyres
(see Table 6 of this document);
- ADD the load capacity of 15 km/h drive wheel of some low section radial tyres
(see Table 8 of this document);
- DELETE the mobile crane radial tyres (see Table 11 of the 2014 edition);
- ADD the wide-base radial tyres equipped with 15° deep groove rims (see Table 12
of this document);
- ADD the calculation and rounding off rules for new tyre maximum and minimum
peripheral dimensions (see Annex C of this document).
Attention is drawn to the possibility that some of the elements of this document may be
the subject of patent rights. The issuing authority of this document shall not be held
responsible for identifying any or all such patent rights.
This document was proposed by China Petroleum and Chemical Industry Federation.
Size designation, dimensions, inflation pressure and load
capacity of pneumatic tyres for industrial vehicles
1 Scope
This document specifies the representation of size designation of pneumatic tyres for
industrial vehicles, as well as dimensions, inflation pressure, and load capacity
requirements corresponding to the size designation of tyres.
This document applies to new pneumatic tyres for industrial vehicles, such as
counterbalanced trucks with mast, towing tractors, and flatbed trucks.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 2981 Technical specification of pneumatic tyres for industrial vehicles
GB/T 6326 Tyre - Vocabulary
3 Terms and definitions
For the purpose of this document, the terms and definitions defined in GB/T 6326 apply.
4 Representation of size designation of tyres
4.1 Normal section tyres
Example.
5 Requirements
5.1 For tyres designed and manufactured in accordance with this document, the
requirements, test methods, marking and packaging, use and maintenance shall comply
with the provisions of GB/T 2981.
5.2 Tyre size designation, measuring rim, and new tyre dimension shall comply with
the provisions of Tables 1, 3, 5, 7, and 9 to 13.Tyre maximum dimension in-service,
permitted rim, and valve stem model should comply with the provisions of Tables 1, 3,
5, 7, and 9 to 13.
5.3 Tyre ply rating, and the correspondence between inflation pressure and load
capacity shall comply with the provisions of Tables 2, 4, 6, 8, and 9 to 13.
5.4 The correspondence between speed symbol and running speed shall comply with
the provisions of Annex A. The correspondence between speed and load capacity should
comply with the provisions of Annex A.
5.5 The correspondence between load index and load capacity shall comply with the
provisions of Annex B.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2982-2024 be delivered?Answer: The full copy PDF of English version of GB/T 2982-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2982-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2982-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2982-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2982-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2982-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2982-2024?A step-by-step guide to download PDF of GB/T 2982-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2982-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |