GB/T 29479.1-2025 PDF English
US$215.00 · In stock · Download in 9 secondsGB/T 29479.1-2025: Mobile laboratory - Part 1: General rule Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 29479.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 29479.1-2025 | English | 215 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Mobile laboratory - Part 1: General rule
| Valid |
| GB/T 29479-2012 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General requirements of mobile laboratory
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 29479.1-2025
GB/T 29479.1-2025: Mobile laboratory - Part 1: General rule---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT29479.1-2025
GB
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 03.120.20
CCS A 20
Replacing GB/T 29479-2012
Mobile laboratory - Part 1.General rule
Issued on: APRIL 25, 2025
Implemented on: NOVEMBER 1, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
Introduction... 5
1 Scope... 6
2 Normative references... 6
3 Terms and definitions... 7
4 Composition and classification and gradation codes... 7
5 Mobile characteristics and requirements... 7
6 Design requirements... 8
7 Technical requirements... 9
7.1 Overall requirements... 9
7.2 Environmental protection and safety... 9
7.3 Intelligence and networking... 10
8 Manufacturing and acceptance requirements (trial run requirements)... 10
9 Management requirements... 10
Appendix A (Informative) Specific-purpose mobile laboratories and their
corresponding implementation standards... 12
References... 13
Mobile laboratory - Part 1.General rule
1 Scope
This document specifies the composition and classification and gradation codes, mobile
characteristics and requirements, design requirements, technical requirements,
manufacturing and acceptance requirements, and management requirements of mobile
laboratories.
This document applies to the design, manufacture, acceptance, use and management of
mobile laboratories.
2 Normative references
The provisions of the following documents constitute the essential clauses of this
document through normative references in this text. Among them, for referenced
documents with dates, only the versions corresponding to the dates are applicable to
this document; for referenced documents without dates, the latest versions (including
all amendments) are applicable to this document.
GB/T 27000 Conformity assessment - Vocabulary and general principles
GB 27421 Mobile laboratories - General requirements for biosafety
GB/T 29472 Safety management specification for mobile laboratory
GB/T 29474 General technical specification for the interior decoration material of
mobile laboratory
GB/T 29475 Design principles and basic requirements for mobile laboratory
GB/T 29476 General technical specification for mobile laboratory instruments and
equipment
GB/T 29477 General technical specification for mobile laboratory shelter
GB/T 29478 Mobile laboratory hazardous waste management specification
GB/T 29479.2 Mobile laboratory - Part 2.Competence requirements
GB/T 29600 Technical specification of the temperature & humidity control system
for the mobile laboratory
GB/T 31017 Mobile laboratory - Terminology
GB/T 31020 Mobile characteristic of mobile laboratories
GB/T 33246 Mobile laboratory - General specification for work table
GB/T 33247 Mobile laboratory - Design guideline of water supply and drainage
system
GB/T 33253 Mobile laboratory - General specification for carriers
GB/T 33709 Mobile laboratory - Guidance on dissemination and traceability of the
value of equipment
GB/T 33710 Mobile laboratory - Method for classification and gradation
GB/T 33711 Mobile laboratory - General technical specification for information
transmission system
GB/T 38080 Technical requirements for safety environment and occupational
health in mobile laboratory
VIM 3rd Edition International vocabulary of metrology - Basic and general
concepts and associated terms
3 Terms and definitions
The terms and definitions defined in GB/T 27000, GB/T 31017 and VIM 3rd Edition
apply to this document.
4 Composition and classification and gradation codes
4.1 The mobile laboratory mainly consists of three functional units. instruments and
equipment, laboratory shelter (including supply system) and carrier.
NOTE. Generally, instruments and equipment include mobile equipment and facilities for online testing
(monitoring).
4.2 The classification and gradation codes for mobile laboratories shall be in accordance
with the provisions of GB/T 33710.
5 Mobile characteristics and requirements
5.1 The mobile characteristics and requirements shall comply with the provisions of
GB/T 31020.
5.2 The mobile characteristics of the mobile laboratory shall be identified. The
identification of mobile characteristics needs to take into account factors such as the
mobile laboratory system design, environmental characteristics and requirements,
device/equipment performance, safety assurance, and personnel.
5.3 Control measures shall be taken for identified mobile characteristics, and their
effectiveness shall be monitored to ensure that the testing (monitoring), calibration,
sampling (sampling, sample-taking), scientific experimental data and results during or
after the movement are valid.
5.4 Procedures shall be in place to ensure that mobile laboratories do not pose safety
risks due to their mobile characteristics, including personnel safety, equipment and
facility safety, and environmental safety. Emergency response capabilities shall be
available in the event of a safety incident.
6 Design requirements
6.1 The overall design shall meet the requirements of GB/T 29475.
6.2 Under the premise of meeting technical indicators, priority shall be given to the use
of standard parts and modularization design to improve interchangeability and
universality. Modularization design should meet the requirements of GB/T 31018.
6.3 The application of new technologies such as system integration, energy
conservation and environmental protection, digitalization, and intelligence should be
considered.
6.4 The mobile laboratory structure shall be able to withstand the rated static load,
including its service, as well as the rated dynamic load during lifting, long-distance
transportation (specified distance), and testing. It shall have high overall strength, high
rigidity, and light weight, and be resistant to fatigue, radiation, interference, and
vibration. It shall be equipped with an environmental conditioning system as needed,
and the work area shall be isolated from the mobile carrier and ancillary equipment.
6.5 Layout design shall fully consider safety passages, ergonomics, specialized
scientific experimental functions, operating space, and instrument and equipment
layout based on the experimental workflow and operating procedures. It shall also meet
the relevant requirements of the laboratory design's application location and special
environment, ventilation, environmental protection, ergonomics, and safety of use.
Ergonomic design shall comply with the provisions of GB/T 31019.
7 Technical requirements
7.1 Overall requirements
7.1.1 The mobile laboratory shall be equipped with experimental devices and
instruments that meet the needs of specific purposes and requirements for testing
(monitoring), calibration, sampling (sampling, sample-taking). The instruments and
equipment for mobile laboratories shall comply with the provisions of GB/T 29476.
7.1.2 The mobile laboratory shelter shall meet the following requirements.
a) The technical requirements shall comply with the provisions of GB/T 29477;
b) The layout is reasonable, with functions such as sample processing, testing,
and storage. Each functional area is relatively independent and meets the
requirements of testing specifications, method procedures, instrument and
equipment usage conditions, or sample handling and preparation;
c) Effective isolation measures shall be in place for equipment, facilities and
conditions that may affect testing data and results to prevent contamination,
interference or other adverse effects on mobile laboratory activities.
7.1.3 The carrier shall comply with the requirements of GB/T 33253.
7.1.4 The operating platform shall comply with the requirements of GB/T 33246.
7.1.5 The water supply and drainage systems should comply with the requirements of
GB/T 33247.
7.1.6 The temperature and humidity control system shall comply with the provisions of
GB/T 29600.
7.1.7 Interior decoration materials shall comply with the requirements of GB/T 29474.
7.1.8 It is advisable to select standard materials/samples suitable for mobile
experiments, and it is advisable to use electronic standard materials/samples.
7.1.9 Specific-purpose mobile laboratories and their corresponding implementation
standards are shown in Appendix A.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 29479.1-2025 be delivered?Answer: The full copy PDF of English version of GB/T 29479.1-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 29479.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29479.1-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 29479.1-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 29479.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29479.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 29479.1-2025?A step-by-step guide to download PDF of GB/T 29479.1-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 29479.1-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|