Powered by Google www.ChineseStandard.net Database: 189759 (7 Apr 2024)

GB/T 25319-2010 (GBT25319-2010)

GB/T 25319-2010_English: PDF (GBT 25319-2010, GBT25319-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 25319-2010English135 Add to Cart 0--9 seconds. Auto-delivery Fuel cell power system used for motor vehicles -- Technical specification Valid GB/T 25319-2010

BASIC DATA
Standard ID GB/T 25319-2010 (GB/T25319-2010)
Description (Translated English) Fuel cell power system used for motor vehicles. Technical specification
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K82
Classification of International Standard 27.070
Word Count Estimation 14,140
Date of Issue 2010-11-10
Date of Implementation 2011-05-01
Quoted Standard GB/T 2900.18; GB/T 3512; GB 3836.1; GB/T 4942.1-2006; GB 4943; GB/T 15329.1; GB/T 17045; GB/Z 18333.1-2001; GB 18655-2002; GB/T 20042.1; GB/T 20438.1; GB/T 20972.1-2007; GB/T 21437.2; GB/T 24549-2009; GB/T 24554-2009; ISO 10605; ISO 11452
Drafting Organization Shanghai Science and Technology Co., Ltd. divine
Administrative Organization National Fuel Cell Standardization Technical Committee
Regulation (derived from) Announcement of Newly Approved National Standards No. 8 of 2010 (total 163)
Proposing organization China Electrical Equipment Industry Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the automotive proton exchange membrane fuel cell power generation system terminology and symbols, requirements, test methods, inspection rules and logos, descriptions and technical documents, This standard applies to automotive proton exchange membrane fuel cell power generation system (hereinafter referred to as Generation system), system boundary system boundary in Figure 1, the thick solid figure generating system into the internal frame, and out of frame relative to the arrow for the generation system input and output,

Standards related to: GB/T 25319-2010

GB/T 25319-2010
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 27.070
K 82
Fuel cell power system used for motor vehicles -
Technical specification
ISSUED ON. NOVEMBER 10, 2010
IMPLEMENTED ON. MAY 1, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 5 
3 Terms and symbols ... 6 
4 Requirements ... 8 
5 Test methods ... 11 
6 Inspection rules ... 14 
7 Marks, description and technical documents ... 16 
Annex A (Informative) Product model preparation method ... 20 
Foreword
Annex A of this Standard is informative.
This Standard was proposed by China Electrical Appliances Industry
Association.
This Standard shall be under the jurisdiction of National Technical Committee
on Fuel Cell of Standardization Administration of China.
Main drafting organization of this Standard. Shanghai Shenli Technology Co.,
Ltd.
The drafting organizations of this Standard. Machinery Industry Beijing Institute
of Technology and Economy, Pearl Hydrogen Co., Ltd.
Main drafters of this Standard. Hu Liqing, Zhang Ruogu, Lu Chenyu, Sun Ting,
Zhang Dai, Dong Hui.
Fuel cell power system used for motor vehicles -
Technical specification
1 Scope
1.1 General
This Standard specifies the terms and symbols, requirements, test methods,
inspection rules and marks, descriptions and technical documentation for
automotive proton exchange membrane fuel cell power generation system.
This Standard is applicable to the automotive proton exchange membrane fuel
cell power generation system (hereinafter referred to as power generation
system).
1.2 System boundary
The system boundary is shown as Figure 1. In the figure, the part within the
thick solid frame is the power generation system. The access arrows relative to
the box refer to the input and output of the power generation system.
Figure 1 The boundary diagram of the power generation system
System boundary
Input power
(electricity or heat)
Fuel
Oxidant
Water
Inactive gas
Ventilation
Electromagnetic
sensitivity,
vibration, wind,
rain, temperature
Recycled heat
Waste heat
Heat
management
system
Hydrogen fuel
supply and
treatment systems
(including
purification)
Oxidant
treatment
system
Ventilation
system
Fuel cell
module
Water
management
system
Automatic
control system
Power
adjustment
system
Internal
power
requirement
Net power output
Waste water
Waste gas and
ventilation
Electromagnetic
interference, noise,
vibration
Humidification
system
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 2900.18, Electrotechnical terminology - Low voltage apparatus
GB/T 3512, Rubber, vulcanized or thermoplastic--Accelerated ageing and
heat resistance tests--Air-oven method (GB/T 3512-2001, eqv ISO 188.1998)
GB 3836.1, Explosive atmospheres - Part 1. Equipment - General
requirements (GB 3836.1-2000, eqv IEC 60079-0.1998)
GB/T 4942.1-2006, Degrees of Protection Provided by the Integral Design of
Rotating Electrical Machined (IP Code) - Classification (IEC 60034-5.2000,
IDT)
GB 4943, Information technology equipment (GB 4943-2001, EQV IEC
60950-1.1999)
GB/T 15329.1, Rubber hoses and hose assemblies - Textile - Reinforced
hydraulic types - Specification - Part 1. Oil - Based fluid applications (GB/T
15329.1-2003, ISO 4079-1.2001, MOD)
GB/T 17045, Protection against electric shock - Common aspects for
installation and equipment (GB/T 17045-2008, IEC 61140.2001, IDT)
GB/Z 18333.1-2001, Lithium-ion batteries for electric road vehicles
GB 18655-2002, Limits and methods of measurement of radio disturbance
characteristics for the protection of receivers used on board vehicles (idt IEC
60025.1995)
GB/T 20042.1, Proton exchange membrane fuel cell - Terminology
GB/T 20438.1, Functional safety of electrical/electronic/programmable
electronic safety-related systems - Part 1. General requirements (GB/T
20438.1-2006, IEC 61508-1.1998, IDT)
GB/T 20972.1-2007, Petroleum and natural gas industries - Material for use
in H2S-containing environments in oil and gas production - Part 1. General
principles for selection of cracking resistant materials (ISO 15156-1.2001,
IDT)
GB/T 21437.2, Road vehicles - Electrical disturbances from conduction and
coupling - Part 2. Electrical transient conduction along supply lines only
(GB/T 21437.2-2008, ISO 7637-2.2004, IDT)
GB/T 24549-2009, Fuel cell electric vehicles - Safety requirements
GB/T 24554-2009, Performance test methods for fuel cell engines
ISO 10605, Road vehicles -- Test methods for electrical disturbances from
electrostatic discharge
ISO 11452, Road vehicles -- Component test methods for electrical
disturbances from narrowband radiated electromagnetic energy -- Part 2.
Absorber-lined shielded enclosure
3 Terms and symbols
3.1 Terms and definitions
The terms and definitions specified in GB/T 2900.18, GB 3836.1, GB 4943 and
GB/T 20042.1 and the following ones apply to this document.
3.1.1 work conditions
the operation state of power generation system, calibrated in net output power
3.1.2 rated conditions
work conditions used by manufacturer for rated power generation system in
100% net output power
3.1.3 idle conditions
the power generation system is in working condition and can maintain its own
work, but not output external power
3.1.4 effective power
fuel cell stack output power minus auxiliary energy consumption equals to
effective power, i.e., the net output power of power generation system
3.1.5 rated power
the effective net output power of power generation system under rated
conditions of which it can work steadily at this power
g) the design of the motor protection structure shall comply with the
provisions of Class I equipment in GB/T 17045.
4.2.2 Safety of fuel supply and processing subsystem of power
generation system
4.2.2.1 Fuel supply safety
The fuel supply port of power generation system (fuel storage container outlet)
shall use at least two different control devices (for example, automatic or
manual) to control fuel supply, so as to ensure the safety of fuel supply.
4.2.2.2 Fuel discharge safety
When the power generation system discharges fuel, it shall provide an
exhaustion hole outside the through vehicle with safety protection device.
4.2.2.3 Fuel leak safety
The fuel supply line of power generation system shall not pass through the
passenger compartment. Fuel storage and fuel applications should have leak
monitoring sensors. When fuel leaks, the control system shall be able to
automatically cut off the fuel supply.
4.2.3 Safety of circuit system of power generation system
The safety of circuit system of power generation system shall meet
requirements of GB/T 24549-2009. The circuit system should have short circuit
or leakage protection device to automatically cut off the total output of the power
generation system.
4.2.4 Safety monitoring, security subsystems
Subsystems such as fuel supply subsystem (excluding fuel storage container),
oxidant supply subsystem, water/heat management subsystem, control
subsystem in power generation system should be connected with safety
monitoring, security subsystems. Safety monitoring, security subsystems
automatically control the safety of each subsystems, and shall, according to
changes in the operation of power generation system, provide corresponding
sound, light reminder and auto on-off control, so as to ensure the normal and
safe operation of power generation system.
4.3 Fuel supply
The fuel supplied to the power generation system shall comply with the relevant
specific fuel cell power generation system standards and requirements.
Impurities it contains which may have harmful effects on the power generation
system should be within the manufacturer's specified scope.
5.7 Waterproof and dustproof test
Inspect according to the test method of GB/T 4942.1-2006. It shall meet
requirements for Grade IP55.
5.8 Electromagnetic compatibility test
5.8.1 Emission test
Inspect according to the test method in GB 18655-2002. The inspection results
shall comply with the emission limits specified in the standard.
5.8.2 Immunity test
5.8.2.1 Conduction immunity test
Inspect according to the test method in GB/T 21437.2. The immunity should
reach Grade II.
5.8.2.2 Radiation immunity test
Inspect according to the test method in ISO 11452. The immunity should reach
Grade II.
5.8.2.3 Electrostatic discharge immunity
Inspect accordi...
...