GB/T 24487-2022 PDF English
US$125.00 · In stock · Download in 9 secondsGB/T 24487-2022: Alumina Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 24487: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 24487-2022 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Alumina
| Valid |
| GB/T 24487-2009 | English | 110 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Alumina
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 24487-2022
GB/T 24487-2022: Alumina---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24487-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.10
CCS H 30
Replacing GB/T 24487-2009
Alumina
氧化铝
Issued on: MARCH 09, 2022
Implemented on: OCTOBER 01, 2022
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Designation... 6
5 Requirements... 6
6 Test methods... 8
7 Inspection rules... 9
8 Marking, packaging, transportation, storage and quality certificate... 10
9 Order form (or contract) contents... 11
Bibliography... 12
Foreword
This document was drafted in accordance with the rules given in GB/T 1.1-2020,
Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 24487-2009, Alumina. Compared with GB/T 24487-
2009, in addition to structural adjustments and editorial changes, the main technical
changes are as follows.
a) Change the scope of application (see Chapter 1; Chapter 1 of the 2009 edition);
b) Change the classification of alumina designations, add AO-G designation, and
delete AO-3 designation (see Chapter 4; 3.1 of the 2009 edition);
c) Change the requirements for chemical compositions and physical properties
(see 5.1 and 5.2; 3.2 and 3.3 of the 2009 edition);
d) Change the calculation rules for Al2O3 content (see 6.1.2; 3.2.1 of the 2009
edition);
e) Change the contents of inspection and acceptance (see 7.1; 5.1 of the 2009
edition);
f) Change the provisions on batch weight in batch (see 7.2; 5.2 of the 2009
edition);
g) Add requirements for sample preparation (see 7.4.3).
Please note that some of the contents of this document may involve patents. The issuing
organization of this document is not responsible for identifying patents.
This document was proposed by the China Nonferrous Metals Industry Association.
This document shall be under the jurisdiction of National Technical Committee 243 on
Nonferrous Metals of Standardization Administration of China (SAC/TC 243).
Drafting organizations of this document. China Aluminum Shandong Co., Ltd.,
Aluminum Corporation of China Limited, Shandong Hongqiao New Material Co., Ltd.,
Chalco Zhengzhou Nonferrous Metals Research Institute Co., Ltd., Yunnan Aluminium
Co., Ltd., Yunnan Wenshan Aluminum Co., Ltd., China Aluminum Mining Company
Limited, Shandong Nanshan Aluminium Co., Ltd., Zhongdiantou Shanxi Aluminum
Co., Ltd., Baotou Aluminum Co., Ltd.
Main drafters of this document. Sun Hongxi, Qian Jize, Han Jizeng, Cao Jianjun, Song
Jianghong, Shi Lei, Liu Huijun, Li Zhigang, Sun Yuanlin, Shao Jing, Sun Shuju, Zhang
Jingbo, Zhu Yangkun, Tian Rui, Pan Shoudao, Fang Hui, Song Dawei, Zhang Xiaoping.
Alumina
1 Scope
This document specifies the technical requirements, test methods, inspection rules,
marking, packaging, transportation, storage, quality certificate and order form (or
contract) contents of alumina (Al2O3).
This document applies to alumina produced from raw materials such as bauxite,
recycled alumina raw materials, etc., used for the production of metallic aluminum by
molten salt electrolysis, as well as to alumina used as raw materials for the production
of corundum, ceramics, refractory products and other alumina chemical products.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
document and are indispensable for its application. For dated references, only the
edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
GB/T 6609.1, Chemical analysis methods and determination of physical
performance of alumina - Part 1.Determination of trace elements content -
Inductively coupled plasma atomic emission spectrometry method
GB/T 6609.2, Chemical analysis methods and determination of physical
performance of alumina - Part 2.Determination of loss of mass at 300 ℃ and 1
000 ℃
GB/T 6609.3, Chemical analysis methods and Determination of physical
performance of alumina - Determination of silicon dioxide content - Molybdenum
blue photometric method
GB/T 6609.4, Chemical analysis methods and determination of physical
performance of alumina - Determination of ferric oxide content -
Orthophenanthroline photometric method
GB/T 6609.5, Chemical analysis methods and Determination of physical
performance of alumina - Determination of sodium oxide content
GB/T 6609.13, Chemical analysis methods and Determination of physical
performance of alumina - Determination of calcium oxide content - Flame atomic
absorption spectrophotometric method
GB/T 6609.24, Chemical analysis methods and Determination of physical
performance of alumina - Measurement of the angle of repose
GB/T 6609.25, Chemical analysis methods and determination of physical
performance of alumina - Part 25.Method for the determination of tapped and
untapped density
GB/T 6609.27, Chemical analysis methods and determination of physical
performance of alumina - Part 27.Particle size analysis - Sieves method
GB/T 6609.30, Chemical analysis methods and determination of physical
performance of alumina - Part 30.Determination of trace elements - Wavelength
dispersive X-ray fluorescence spectrometric method
GB/T 6609.32, Chemical analysis methods and determination of physical
performance of alumina - Part 32.Determination of a-alumina content by X-ray
diffraction
GB/T 6609.33, Chemical analysis methods and determination of physical
performance of alumina - Part 33.Determination of attrition index
GB/T 6609.35, Chemical analysis methods and determination of physical
performance of alumina - Part 35.Determination of specific surface area -
Nitrogen adsorption method
GB/T 6609.36, Chemical analysis methods and determination of physical
performance of alumina - Part 36.Determination of flow time
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 19077.1, Particle size analysis - Laser diffraction method
3 Terms and definitions
No terms and definitions need to be defined in this document.
4 Designation
Alumina is divided into three designations according to its main chemical compositions
and physical properties. AO-G, AO-1 and AO-2.
5 Requirements
5.1 Chemical compositions
6 Test methods
6.1 Chemical compositions
6.1.1 The chemical compositions of alumina shall be calculated on a dry basis after
drying at 300 ℃ ± 5 ℃ for 2 h.
6.1.2 Calculation of Al2O3 content. 100% minus the contents of SiO2, CaO, Fe2O3,
Na2O and the loss on ignition.
6.1.3 The contents of SiO2, Fe2O3, Na2O, CaO and other compositions shall be
determined in accordance with the provisions of GB/T 6609.3, GB/T 6609.4, GB/T
6609.5 and GB/T 6609.13, or in accordance with the provisions of GB/T 6609.1 and
GB/T 6609.30.GB/T 6609.3, GB/T 6609.4, GB/T 6609.5 and GB/T 6609.13 are
arbitration methods.
6.1.4 The determination of loss on ignition shall be carried out in accordance with the
provisions of GB/T 6609.2.
6.1.5 The determination of trace element contents such as Mn, V, Zn, Ti, Ga, K, etc.
shall be carried out in accordance with the provisions of GB/T 6609.1.
6.2 Physical properties
6.2.1 The specific surface area shall be determined in accordance with the provisions
of GB/T 6609.35.
6.2.2 The content of particles with a particle size less than 45 μm and particles with a
particle size greater than or equal to 150 μm in the particle size distribution shall be
determined in accordance with the provisions of GB/T 6609.27.
6.2.3 The content of particles with a particle size less than 20 μm in the particle size
distribution shall be determined in accordance with the provisions of GB/T 19077.1.
6.2.4 The flow time shall be determined in accordance with the provisions of GB/T
6609.36.
6.2.5 The angle of repose shall be determined in accordance with the provisions of
GB/T 6609.24.
6.2.6 The attrition index shall be determined in accordance with the provisions of GB/T
6609.33.
6.2.7 The α-Al2O3 content shall be determined in accordance with the provisions of
GB/T 6609.32.
6.2.8 The bulk density shall be determined in accordance with the provisions of GB/T
6609.25.
6.3 Appearance quality
The appearance quality of alumina shall be inspected visually.
7 Inspection rules
7.1 Inspection and acceptance
7.1.1 Alumina shall be inspected by the supplier's technical supervision department to
ensure that the product quality complies with the provisions of this document and to fill
in the product quality certificate.
7.1.2 The buyer shall inspect the received products in accordance with the provisions
of this document. If the inspection results are inconsistent with the provisions of this
document, it shall be reported to the supplier within 30 days from the date of receipt of
the product and resolved through negotiation between the supplier and the buyer. If
arbitration is required, the arbitration sampling shall be taken on the buyer’s side and
carried out by the supplier and the buyer jointly.
7.1.3 If necessary, the buyer may, in accordance with the terms of the order form (or
contract), enter the supplier's site to conduct pre-delivery inspection and acceptance of
the products to be delivered.
7.2 Batch
Alumina shall be submitted for inspection in batches. Each batch shall consist of
products of the same designation. The weight of each batch of bagged alumina or bulk
alumina in tank trucks shall not exceed 2 000 tons.
7.3 Inspection items
Each batch of alumina shall be inspected for chemical composition, physical properties
and appearance quality.
7.4 Sampling and sample preparation
7.4.1 Sampling during production process
Manufacturers can refer to GB/T 6609.22 to develop sampling plans for the production
process and use them as the basis for factory inspection.
7.4.2 Arbitration sampling
7.4.2.1 For each batch of bagged alumina, at least 20 bags shall be randomly selected.
Insert a copper (or stainless-steel) tube probe with a diameter of 15 mm ~ 20 mm along
8.2.1 The outer packaging of alumina shall be made of polypropylene plastic woven
bags or other materials suitable for product packaging, transportation and storage to
ensure that the product quality meets the technical requirements of this document.
8.2.2 When the product is delivered, the compartment shall be cleaned or covered with
protective materials. Products of different designations shall not be mixed.
8.2.3 Products shall be stored in batches in a clean, dry warehouse and shall not be
contaminated.
8.3 Quality certification
Each batch of products shall be accompanied by a quality certificate, which indicates.
a) supplier information;
b) product name and designation;
c) batch number and net content;
d) analysis and inspection results and the stamp of the supplier’s technical
(quality) supervision department;
e) a reference to this document;
f) production date or packaging date.
9 Order form (or contract) contents
The order form (or contract) for the materials listed in this document shall include the
following.
a) product name;
b) designation;
c) net content;
d) a reference to this document;
e) others.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 24487-2022 be delivered?Answer: The full copy PDF of English version of GB/T 24487-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 24487-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24487-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24487-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 24487-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24487-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 24487-2022?A step-by-step guide to download PDF of GB/T 24487-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 24487-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|