GB/T 2350-2020 PDF English
US$155.00 · In stock · Download in 9 secondsGB/T 2350-2020: Fluid power systems and components - Cylinder piston rod thread types and dimensions Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2350: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2350-2020 | English | 155 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Fluid power systems and components - Cylinder piston rod thread types and dimensions
| Valid |
| GB/T 2350-1980 | English | 199 |
Add to Cart
|
2 days
|
Fluid power systems and components. Cylinders. Piston rod thread dimensions and types
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2350-2020
GB/T 2350-2020: Fluid power systems and components - Cylinder piston rod thread types and dimensions
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2350-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.100.20
J 20
Replacing GB/T 2350-1980
Fluid power systems and components -
Cylinder piston rod thread types and dimensions
(ISO 4395:2009, Fluid power systems and components -
Cylinder piston rod end types and dimensions, MOD)
ISSUED ON: NOVEMBER 19, 2020
IMPLEMENTED ON: JUNE 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Identification code for piston rod thread mounting dimensions ... 5
5 Structures and dimensions of hydraulic cylinder piston rod end ... 6
6 Structures and dimensions of air cylinder piston rod end ... 10
7 Annotation notes ... 13
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 2350-1980 "Fluid power systems and
components - Cylinders - Piston rod thread dimensions and types". Compared
with GB/T 2350-1980, the main technical changes are as follows:
- ADD "Terms and definitions" (see Clause 3);
- Modify the identification code for the dimensions such as thread diameter
and thread length, to meet the requirements of GB/T 9094 (see Table
1~Table 4 and Figure 1~Figure 9; tables of the 1980 edition);
- ADD the mark of reference point (see Figure 1~Figure 9);
- Internal and external thread types and dimensions of the piston rod ends of
hydraulic cylinder and air cylinder are given in Table 2, Table 1, and Table
4, respectively (see Table 2, Table 1, and Table 4; tables of the 1980 edition);
- ADD the types and dimensions of the wrench face and wrench hole of
hydraulic cylinder and air cylinder piston rod end (see 5.2 and 6.2).
This Standard uses the redraft law to modify and adopt ISO 4395:2009 "Fluid
power systems and components - Cylinder piston rod end types and
dimensions".
The technical differences between this Standard and ISO 4395:2009 and ISO
4395:2009/Cor.1:2010 corrigenda and their reasons are as follows:
- As for the normative references, this Standard has made adjustments with
technical differences, to adapt to the technical conditions of China. The
adjustments are mainly reflected in Clause 2 “Normative references”. The
specific adjustments are as follows:
Replace ISO 6099 with GB/T 9094, which is identical to the
international standard (see Clause 4);
Replace ISO 5598 with GB/T 17446, which is identical to the
international standard (see Clause 3);
ADD reference to GB/T 2348 (see Clause 2).
- Delete the dimensions A and KK in Figure 5, to correspond to the
dimensions given in Table 3 (see Figure 5; Figure 5 of ISO 4395:2009).
Fluid power systems and components -
Cylinder piston rod thread types and dimensions
1 Scope
This Standard specifies the common series of piston rod threads for hydraulic
cylinders and air cylinders that use hydraulic oil (fluid) or compressed air as the
working medium; as well as the wrench face and wrench hole dimensions for
assembly and tightening of the piston rod threads.
This Standard applies to the external connecting threads of hydraulic cylinder
and air cylinder piston rods.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 2348 Fluid power systems and components - Cylinder bores and piston
rod diameters (GB/T 2348-2018, ISO 3320:2013, MOD)
GB/T 9094 Fluid power systems and components - Identification code for
cylinders mounting dimensions and mounting types (GB/T 9094-2020, ISO
6099:2018, IDT)
GB/T 17446 Fluid power systems and components - Vocabulary (GB/T
17446-2012, ISO 5598:2008, IDT)
3 Terms and definitions
The terms and definitions defined in GB/T 17446 apply to this document.
4 Identification code for piston rod thread mounting
dimensions
The identification code for piston rod thread mounting dimensions shall meet
the requirements of GB/T 9094.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2350-2020 be delivered?Answer: The full copy PDF of English version of GB/T 2350-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2350-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2350-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2350-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2350-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2350-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2350-2020?A step-by-step guide to download PDF of GB/T 2350-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2350-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|