Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)

GB/T 19826-2014 (GBT19826-2014)

GB/T 19826-2014_English: PDF (GBT 19826-2014, GBT19826-2014)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19826-2014English145 Add to Cart 0--9 seconds. Auto-delivery General specification and safety requirements for DC power supply equipment of power projects Valid GB/T 19826-2014

BASIC DATA
Standard ID GB/T 19826-2014 (GB/T19826-2014)
Description (Translated English) General specification and safety requirements for DC power supply equipment of power projects
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K45
Classification of International Standard 29.240.01
Word Count Estimation 45,43
Date of Issue 2014/5/6
Date of Implementation 2014/10/28
Older Standard (superseded by this standard) GB/T 19826-2005
Quoted Standard GB/T 2423.4-2008; GB/T 2900.1; GB/T 2900.17; GB/T 2900.32; GB/T 2900.33; GB/T 2900.41; GB 4208-2008; GB/T 4365; GB/T 7261-2008; GB/T 11287-2000; GB/T 14537-1993; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 17626.4-2008; GB/T 17626.5-2008; GB/T 17626.6-2008
Drafting Organization Xuchang Cape Electric Institute
Administrative Organization National Standardization Technical Committee of measure relays and protection equipment
Regulation (derived from) National Standards Bulletin No. 9 2014
Proposing organization China Electrical Equipment Industry Association
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the electrical engineering DC power supply, integrated power supply general technical conditions and safety requirements, and test methods, inspection rules, marking, packaging, transportation and storage requirements. This Standar

Standards related to: GB/T 19826-2014

GB/T 19826-2014
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.240.01
K 45
Replacing GB/T 19826-2005
General specification and safety requirements for
DC power supply equipment of power projects
ISSUED ON. MAY 06, 2014
IMPLEMENTED ON. OCTOBER 28, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 7
4 Product model and basic parameters ... 8
4.1 Product model and implication ... 8
4.2 Product specifications and parameters ... 10
5 General requirements ... 11
5.1 Ambient condition requirements ... 11
5.2 Technical requirements ... 12
5.3 Safety requirements ... 25
5.4 Requirements for electromagnetic compatibility ... 28
5.5 Structure and process requirements ... 29
6 Test method ... 31
6.1 Test conditions ... 31
6.2 Structure and process inspections ... 32
6.3 Stabilized current precision, stabilized voltage precision and ripple factor tests
... 32
6.4 DC current/voltage output error test ... 34
6.5 Tests on voltage and current limiting characteristics ... 35
6.6 Tests on efficiency and power factor ... 36
6.7 Equalizing current imbalance test ... 37
6.8 Test on soft start characteristic ... 37
6.9 Tests on AC uninterrupted power supply and inverter supply ... 38
6.10 DC switching power supply unit ... 41
6.11 Storage battery test ... 43
6.12 DC supply capacity test ... 44
6.13 Noise test ... 45
6.14 Protection and warning function test ... 45
6.15 Monitoring function test ... 46
6.16 Communication function test ... 46
6.17 Product's charging function test ... 46
6.18 Influence of temperature variation on the performance ... 48
6.19 Product configuration test ... 48
6.20 Safety requirement test ... 48
6.21 Immunity test ... 49
6.22 Electromagnetic emission test... 50
7 Inspection rules ... 51
7.1 General requirements ... 51
7.2 Delivery inspection ... 51
7.3 Type inspection ... 51
8 Marking, packaging, transportation and storage ... 54
8.1 Marking ... 54
8.2 Packaging ... 55
8.3 Transportation ... 55
8.4 Storage ... 55
9 Accompanied documents ... 56
Annex A (normative) Switching impulse discharge test requirements ... 57
Annex B (informative) Relevant requirements of wire color and section area 60
Annex C (informative) Charge/discharge characteristics of DC power supply
equipment ... 62
Foreword
This Standard is drafted according to the rules in GB/T 1.1-2009.
This Standard replaces GB/T 19826-2005 “General specification and safety
requirements for DC power supply equipment of power project”. Compared with GB/T
19826-2005, the main technical changes in this Standard are as follows.
- ADD the requirements of integrated power supply equipment;
- CHANGE the range of AC input voltage from (85 % ~ 115 %)Un to (85 % ~
120 %)Un;
- CHANGE the ripple coefficient to ripple factor, which is redefined and coordinated
with other standards;
- ADD the requirements of soft start characteristic;
- DELETE the requirements of other charging units;
- DELETE the requirements of cadmium-nickel storage battery.
This Standard is proposed by China Electrical Equipment Industry Association.
This Standard is under the jurisdiction of National Technical Committee on Measuring
Relay and Protective Equipment of Standardization Administration of China (SAC/TC
154).
Drafting organizations of this Standard. Xuchang Ketop Electric Research Institute,
Shenzhen Power Supply Bureau Co., Ltd., Xuji Power Supply Co., Ltd., Emerson
Network Power Co., Ltd., Shenzhen Auto Electric Power Plant Co., Ltd., Shenzhen
Increase Science and Technology Development Co., Ltd., Guangzhou Toshiba Bai
Yunling Machine Power Electronics Co., Ltd., Yantai Dongfang Yulin Electric Co., Ltd.,
China Titans Energy Technology Group Co., Ltd., Ontech Electric Corporation,
Hangzhou Zhongheng Electric Co., Ltd., Integrated Electronic Systems Lab Co., Ltd.,
Hebei Beiheng Electrical Technology Co., Ltd, Henan Electric Power Test and
Research Institute, Zhengzhou Power Supply Company, Southwest Electric Power
Design Institute and Henan Electric Power Survey & Design Institute.
Chief drafting staff of this Standard. Li Quanxi, Yang Zhongliang, Yang Huixia, Wang
Gang, Feng Qianyi, Wang Fengren, He Yongzhi, Shi Gang, Xue Anzhong, Pan Jingyi,
Liu Ping, Xu Shengfei, Sun Shizhu, Jiang Guanqian, Tian Jianjun, Zhaojun, Li Hongwei,
Guan Jiangqiao, Geng Jianfeng and Luo Zhijun.
This Standard was firstly issued in 2005, and this is the first revision.
General specification and safety requirements for
DC power supply equipment of power projects
1 Scope
This Standard specifies the general specification and safety requirements for DC
power supply equipment and integrated power supply equipment of power projects as
well as the requirements of such aspects as test methods, inspection rules, marking,
packaging, transportation and storage.
This Standard is applicable to the DC and integrated power supply equipment
(hereinafter referred to as “product”) of power projects and serves as the criteria for
product design, manufacturing, inspection and application. It also serves as the
reference for the application of other power supply equipment not included.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the normative document (including any amendments) applies.
GB/T 2423.4-2008 Environmental Testing for Electric and Electronic Products - Part
2. Test Method - Test Db. Damp Heat, Cyclic (12 h + 12 h Cycle)
GB/T 2900.1 Electrotechnical Terminology - Fundamental Terms
GB/T 2900.17 Electrotechnical Terminology - Measuring Relays
GB/T 2900.32 Electrotechnical Terminology - Power Semiconductor Parts
GB/T 2900.33 Electrotechnical Terminology - Power Electronics
GB/T 2900.41 Electrotechnical Terminology - Primary and Secondary Cells and
Batteries
GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 4365 Electrotechnical Terminology - Electromagnetic Compatibility
GB/T 7261-2008 Basic Testing Method for Relaying Protection and Security
Automat...
...