Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (Feb 21, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart

GB/T 19479-2004

Chinese Standard: 'GB/T 19479-2004'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 19479-2004English90 Add to Cart 0--10 minutes. Auto immediate delivery. Good manufacturing practice for pig slaughtering Obsolete GB/T 19479-2004

  In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  

Standard ID GB/T 19479-2004 (GB/T19479-2004)
Description (Translated English) Good manufacturing practice for pig slaughting
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard X22
Classification of International Standard 67.120.10
Word Count Estimation 12,185
Date of Issue 2004-03-16
Date of Implementation 2004-08-01
Adopted Standard CAC/RCP 1-1969 (1997); NEQ; FDA 21 part110; NEQ
Drafting Organization Food Sciences, China Agricultural University
Administrative Organization China Meat Association
Regulation (derived from) Announcement of Newly Approved National Standards No. 4 of 2004 (No. 66 overall)
Proposing organization China Chamber of Commerce
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
Summary This standard specifies: for pig slaughtering business personnel, environment and facilities, ante-mortem, slaughter, post-mortem processing and segmentation, storage and transportation process quality and lower pay Fortunately pipe monument peers and a special technique to this scribe. This standard applies to: hog slaughtering and processing enterprises division.

ICS 67.120.10
X 22
Good manufacturing practice for pig slaughting
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
Table of Contents
Foreword ... 3 
1  Scope ... 4 
2  Normative references ... 4 
3  Terms and definitions ... 4 
4  Personnel ... 8 
5  Environment and facilities ... 9 
6  Process of slaughtering and cutting ... 13 
7  Slaughter process inspection ... 18 
8  Packaging, labelling and identification ... 19 
9  Storage and transportation of finished goods ... 20 
10  Records ... 20 
11  Quality management ... 21 
This Standard is developed according to the principle of CAC/RCPT-1969, Rev.3 (1997)
and CAC/RCPT-1969, R ev.3 (1997) Annex, on the basis of referring to part 110 of US
FDA and the content of relevant Canadian standards, and combining the China's national
conditions. This Standard clearly defines the slaughter processing enterprises’ factory
environment, plant and facilities, equipment, organizational structure, personnel, health
management, process management, packaging and health marking, labeling, quality
management, storage management, quality information feedback and process, system
establishment and records, and so on.
This Standard was proposed by China General Chamber of Commerce.
This Standard shall be under the jurisdiction of China Meat Association.
This Standard is responsibly drafted by College of Food Science of China Agricultural
University, and SETC slaughtered Identification Centre.
Main drafters of this Standard. Ma Changwei, Jin Zhixiong, Xu Jing, Wang Guiji, Zhang
Xinling, and Liu Hucheng,
Good manufacturing practice for pig slaughting
1 Scope
This Standard specifies the basic technical requirements for pig slaughtering-cutting
enterprises’ personnel; environment and equipment; processing and segmentation before
slaughtering, in slaughtering and after slaughtering; and quality and sanitation
management during storage and transportation; and other aspects.
This Standard applies to pig slaughtering and cutting processing enterprises.
2 Normative references
The articles contained in the following documents have become this Standard when they
are quoted herein. For the dated documents so quoted, all the modifications (excluding
corrections) or revisions made thereafter shall not be applicable to this Standard. For the
undated documents so quoted, the latest editions shall be applicable to this Standard.
GB 5749 Standards for drinking water quality
GB/T 6388 Transport package shipping mark
GB 7188 Office machines and data processing equipment; Keyboard layouts for
numeric applications
GB 9959.2 Fresh and frozen pork lean cuts
GB 9959.3 Frozen pork, parts
GB 13457 Discharge standard of water pollutants for meat packing industry
GB/T 17236-1998 The operating procedures of pig-slaughtering
GB/T 17996-1999 Code for product quality inspection for pig in slaughtering
GB 50317-2000 Code for design of pigs slaughtering and cutting rooms
Food Hygiene Law of the People's Republic of China
3 Terms and definitions
The following terms and definitions apply to this Standard.
Synchronous inspection
An inspection method that removes the offal after slaughtering the pig and places it on the
arranged pan or hook device, and make it run with carcass production line synchronously,
so as to be ease for veterinarian to do contrast test and comprehensive judgment.
Inspection and reception department
The place where the inspection and reception to live pig are done, after they enter into the
Isolation room
The place where the suspicious pigs are isolated, observed and the disease of them are
Waiting pens
The place where the starvation, water drinking and shower to pigs are done before
Emergency slaughtering room
The place where the slaughtering to sick and injured pigs is done.
Slaughtering room
The place where syncope, bleeding, processing to be half carcass to pigs are done.
Cutting and deboning room
The place where the cooling, deboning, split and cutting to each cut to carcass are done.
By-products processing room
The place where the heart, liver, lung, spleen, stomach, intestine, kidney, head, hooves,
Chilling room
The room used to chill products.
Freezing room
The room used to freeze products.
4 Personnel
4.1 Health education
The factory shall conduct the qualification health-safety education to staffs who newly
participate in work and the staffs who participates in temporary-work; conduct publicity
and education of Food Hygiene Law of the People's Republic of China, various health
practices and operation procedures on a regular basis to staffs; and institutionalize and
standardize the health training.
4.2 Physical examination
The production personnel and management personnel related to production shall do
health examination at least once a year; the staffs who newly participate in work and the
staffs who participate in temporary-work can only take up his post after physical
examination and obtaining health certificate. The employee health records shall be
established. The person having one of the following diseases can not engage in
slaughtering and meat-contact work. dysentery, typhoid, viral hepatitis, gastrointestinal
diseases (including pathogen carriers), active tuberculosis, suppurative, exudative skin
disease, or other diseases that are incompatible with food hygiene.
4.3 Injury treatment
For the production personnel who get stab wounds or other injuries, it shall immediately
take appropriate measures and bandage for protection, otherwise, they cannot engage in
slaughtering and meat-contact work.
4.4 Hand-washing requirements
The production staffs must wash hands and do disinfection when encountering the
following situation. before starting work; after using the toilet; after treating contaminated
material or pigs and their offal; after engaging in other activities unrelated to production.
4.5 Personal hygiene
4.5.1 Production staffs shall maintain good personal hygiene, regularly bathe, change
There shall be flat without water on the road and field where the slaughtering room and
cutting and deboning room located. The main channel and venue shall adopt concrete to
5.3 Slaughterhouse (plant) facility requirements
5.3.1 The material in workshop shall be impermeable, slip prevention and easy-to-clean
material. The surface of it shall be smooth without cracks and local water. The drainage
slope. the drainage slope in cutting and deboning room shall not be less than 15; within
slaughtering room, it shall not be less than 2%. The wall surface and dado in workshop
shall be smooth; the material shall be non-toxic and non-porous. White or light color is
suitable. If the dado is made from stainless steel or plastic plate, all boards interface and
edge connections shall be closed. Dado height. the dado height in slaughtering room shall
not be less than 3m; within cutting and deboning room, it shall not be less than 2m.
5.3.2 The corners at floor, ceilings, walls, columns, windows, etc. shall be designed to be
arc. The material of roof or ceiling shall be smooth, non-toxic, washable material that is
not easy to fall off; there shall be no slit, concave corners or protrusions that are not easy
to wash; there shall be no secondary beams closely to each other. Doors and windows
shall be made from corrosion-resistant materials with good seal performance and without
distortion, water seepage. Windowsill shall be designed to 45°C downward slope, or the
non-sill structure can be used. Stairs and handrails, fences shall be made to be monolithic;
the surface layer shall be made from impermeable mater......
Related standard: GB/T 19479-2019    GB/T 19477-2018
Related PDF sample: GB/T 19479-2019    GB/T 19478-2004