GB/T 17505-2016 PDF English
US$135.00 · In stock · Download in 9 secondsGB/T 17505-2016: Steel and steel products -- General technical delivery requirements Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 17505: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 17505-2016 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Steel and steel products -- General technical delivery requirements
| Valid |
| GB/T 17505-1998 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Steel and steel products - General technical delivery requirements
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 17505-2016
GB/T 17505-2016: Steel and steel products -- General technical delivery requirements---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17505-2016
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.01
H 40
Replacing GB/T 17505-1998
Steel and steel products –
General technical delivery requirements
(ISO 404.2013, MOD)
Issued on. FEBRUARY 24, 2016
Implemented on. JANUARY 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 6
4 Ordering information provided by user... 9
5 Manufacturing process... 10
6 Supply by intermediary... 10
7 Requirements... 11
8 Inspection and testing... 13
9 Reclassification and repair... 19
10 Marks... 19
11 Objection... 20
Annex A... 22
Bibliography... 24
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 17505-1998 Steel and Steel Products - General
Technical Delivery Requirements.
Compared with GB/T 17505-1998, the main technical changes are as follows.
- changed the name of standard to “Steel and steel products - General
technical delivery requirements”;
- moved “This Standard must be used together with other technical
standards; it cannot be used for ordering” from “Foreword” to “Scope” (see
NOTE in Clause 1 of this edition; Foreword of 1998 edition);
- deleted terms and definition, relevant requirements of continuous
inspection (see 3.3, 8.1.2 of 1998 edition);
- added terms and definitions for “manufacturer” and “intermediary”;
defined the respective rights and obligations (see 3.14, 3.15, 6.4 of this
edition);
- modified the definition of “inspection representative” as well as its relevant
rights and obligations (see 3.6, 8.3.1.3 of this edition; 3.5, 8.3.1.3 of 1998
edition);
- modified the definition of “cast analysis”; added relevant instructions and
general provisions on methods for chemical analysis (see 3.11, 7.2 of this
edition; 3.12, 7.2 of 1998 edition);
- modified the name of Clause 4 from “Ordering content” to “Ordering
information provided by user” (see Clause 4 of this edition);
- modified requirements for “intermediary” (see Clause 6 of this edition);
- specified requirements for “inspection documents” and “quality certificate”
(see 6.1, Clause 8 of this edition);
- supplemented with relevant surface quality inspection standards (see
NOTE in 7.4.1.2 of this edition; 7.4.1 of 1998 edition);
- added requirements for “welding repair” (see 7.4.4.1 of this edition; 7.4.4
of 1998 edition);
- added requirements for protection of “safety and health” (see 7.1 of this
edition; 7.1 of 1998 edition);
- modified “ordering content” (see 8.3.1.1 of this edition; 8.3.1.1 of 1998
edition);
- modified “the composition of test unit” (see 8.3.2.1 of this edition; 8.3.2.1
of 1998 edition);
- added preparation requirements for sample (see 8.3.3.1 of this edition;
8.3.3.1 of 1998 edition);
- modified “rounding of test results” (see 8.5 of this edition; 8.5 of 1998
edition);
- added “Technical differences and reasons between this Standard and ISO
404.2013” (see Annex A of this edition);
- added “common standards for other test methods of steel products” (see
8.3.4.1.4 and Bibliography of this edition).
This Part uses redrafting method to modify and adopt ISO 404.2013 Steel and
steel products - General technical delivery requirements.
This Standard is basically consistent with ISO 404.2013.However, when using
ISO 404.2013, in content, it made modification by combining China’s national
conditions. Relevant technical differences have been incorporated into the body
and marked on the margin of the involved provisions. The technical differences
and reasons are given in Annex A for reference.
This Standard was proposed by China Iron and Steel Association.
This Standard shall be under the jurisdiction of National Technical Committee
on Steel of Standardization Administration of China (SAC/TC 183).
The drafting organization of this Standard. China Metallurgical Information &
Standardization Institute.
Main drafters of this Standard. Luan Yan, Dai Qiang, Yan Chengming.
The previous version replaced by this Standard is as follows.
- GB/T 17505-1998.
Steel and steel products –
General technical delivery requirements
1 Scope
This Standard specifies general technical delivery requirements for steel and
steel products contained in GB/T 15574 (excluding steel and powder metallurgy
products).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 1467 Method for chemical analysis of metallurgy product - General
rules and regulations
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T
13304.1, GB/T 13304.2 and GB/T 15574 and the following terms and definitions
apply.
before delivery, according to the technical requirements of contract, conduct the
inspection and testing for delivered products or partial products so as to verify
if they meet the contract’s requirements
4 Ordering information provided by user
The contract shall include all content required to describe the product
characteristics and the following details about delivery.
5 Manufacturing process
Unless there is an agreement at the time of order or as otherwise specified in
the product standard, the manufacturing process shall be selected by the
manufacturer.
6 Supply by intermediary
If the intermediary changes the product size, it shall provide an additional
document which is in line with the new state. It is also applicable to all special
requirements not contained in manufacturer’s inspection document or quality
certificate.
7 Requirements
Unless otherwise specified that it is product analysis, the requirements related
to chemical composition all refer to cast analysis. The analysis method shall
comply with the provisions of GB/T 1467.
When required, the special technology for defect detection (such as X-ray
detection, ultrasonic inspection, magnetic particle testing, etc.) as well as its
number of product testing unit, processing method of test results shall be in
accordance with product standard or determined via negotiation during ordering.
8 Inspection and testing
During testing, manufacturer shall ensure the traceability between sample
product, sample, test piece and test unit.
Sequential testing results shall be assessed by the following methods (take
impact testing results as an example).
9 Reclassification and repair
Manufacture has right to conduct reclassification or repair to unqualified product
before or after re-inspection (for example. heat treatment, cutting, rolling,
drawing, etc.), then according to 8.3.2, submit those products for acceptance
as new test units.
10 Marks
Manufacture shall make marks according to product standard or contract
requirements for product or delivery batch.
11 Objection
In case of any dispute, the sample conditions and testing methods used to
determine the controversial characteristic values shall be performed according
to the provisions of corresponding national standards or industrial standard, or
the provisions of 8.3.3 and 8.3.4.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 17505-2016 be delivered?Answer: The full copy PDF of English version of GB/T 17505-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 17505-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17505-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 17505-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 17505-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17505-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 17505-2016?A step-by-step guide to download PDF of GB/T 17505-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17505-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|