GB/T 1703-2017 (GB/T1703-2017, GBT 1703-2017, GBT1703-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1703-2017 | English | 85 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Cycle inner tubes
| Valid |
GB/T 1703-2017
|
Standards related to: GB/T 1703-2017
| Standard ID | GB/T 1703-2017 (GB/T1703-2017) | | Description (Translated English) | Cycle inner tubes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G41 | | Classification of International Standard | 83.160.10 | | Word Count Estimation | 6,644 | | Date of Issue | 2017-09-07 | | Date of Implementation | 2018-08-01 | | Older Standard (superseded by this standard) | GB/T 1703-2008 | | Drafting Organization | (Shenzhen) Co., Ltd., Guangzhou Long Star Rubber Co., Ltd., Guangzhou Rubber Industry Products Research Institute Co., Ltd., Xiamen is the new Industrial Co., Ltd., Guangzhou Flying Rubber Co., Ltd., Tianjin Wanda Tire Group Co., Ltd., the new Dongyue Group Limited company | | Administrative Organization | National Tire Rim Standardization Technical Committee (SAC / TC 19) | | Proposing organization | China Petroleum and Chemical Industry Federation | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee | GB/T 1703-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.10
G 41
Replacing GB/T 1703-2008
Cycle inner tubes
ISSUED ON. SEPTEMBER 7, 2017
IMPLEMENTED ON. AUGUST 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Categories of inner tube ... 4
4 Requirements ... 4
5 Test methods ... 6
6 Marking ... 8
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 1703-2008 “Cycle inner tubes”. As compared with
GB/T 1703-2008, the main technical changes are as follows.
- DELETE references to GB/T 1702 and HG/T 2942 (SEE Chapter 2 of the
2008 version), ADD references to GB 1796.1 and GB 1796.2 (see Chapter
2);
- For “Table 1 -- Other main properties of inner tubes”, ADD the item of
elongation at break of inner tubes; For the adhesive strength test of rubber
base valve and tube body, ADD Footnote a; MODIFY the specification
classification description in the index column of machine test mileage (SEE
4.4.2, the 4.4.2 of the 2008 version);
- ADD the measuring position and measuring method for inner tube inflating
volume when detecting inner tube airtightness, and MODIFY the inflating
volume of Category B inner tube (SEE 5.1.1, the 5.1.1 of the 2008 version);
- ADD the tensile test method for elongation at break of inner tubes (SEE
5.2).
This Standard was proposed by China Petroleum and Chemical Industry
Federation.
This Standard shall be under the jurisdiction of China National Technical
Committee for Tyres and Rims Standardization (SAC/TC 19).
Drafting organizations of this Standard. Jiantai Rubber (Shenzhen) Co., Ltd.,
Sichuan Yuanxing Rubber Co., Ltd., Guangzhou Rubber Industry Products
Research Institute Co., Ltd., Xiamen Cheng Shin Enterprise Co., Ltd.,
Guangzhou Feixuan Rubber Co., Ltd., Tianjin Wanda Tyre Group Co., Ltd., New
Dongyue Group Co., Ltd.
Main drafters of this Standard. Chen Qingsong, Wang Qingyi, Qiu Linghong,
Zhang Guangfu, Zhu Hongsuo, Li Ruihua, Huang Yaopeng, Yu Zhenjiang, Xuan
Zhaomin.
The previous releases of versions of the standard replaced by this Standard
are.
- GB 1703-1979, GB 1703-1986, GB/T 1703-1992, GB/T 1703-1997, GB/T
1703-2008.
Cycle inner tubes
1 Scope
This Standard specifies the categories, requirements, test methods, and
marking of inner tubes.
This Standard is applicable to the model vulcanized inner tube which
assembles cycle tyre.
This Standard is not applicable to non-model vulcanized inner tube and the
inner tube for tubular racing-car tyre.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this document.
GB/T 528 Rubber, vulcanized or thermoplastic - Determination of tensile
stress-strain properties
GB/T 1796.1 Tyre valves - Part 1. Tube clamp-in valves
GB/T 1796.2 Tyre valves - Part 2. Rubber base valves
GB/T 7377 Series of cycle tyres
GB/T 9749 Performance testing method for cycle tyres
3 Categories of inner tube
According to the different materials used to make inner tubes, inner tubes are
divided into two categories.
- Natural rubber and natural rubber-based inner tubes are Category A;
- Butyl rubber and butyl rubber-based inner tubes are Category B.
4 Requirements
...
|