Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 15252-2014 (GBT15252-2014)

GB/T 15252-2014_English: PDF (GBT 15252-2014, GBT15252-2014)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 15252-2014English90 Add to Cart 0--9 seconds. Auto-delivery Mix rubber or rubber -- Determination of sulfide sulfur content -- Iodometric method Valid GB/T 15252-2014

BASIC DATA
Standard ID GB/T 15252-2014 (GB/T15252-2014)
Description (Translated English) Mix rubber or rubber--Determination of sulfide sulfur content--Iodometric method
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G40
Classification of International Standard 83.060
Word Count Estimation 9,974
Date of Issue 2014/12/12
Date of Implementation 2015/6/1
Older Standard (superseded by this standard) GB/T 15252-1994
Quoted Standard GB/T 601-2002; GB/T 603-2002; GB/T 3516-2006; GB/T 6682-2008; GB/T 17783-1999
Drafting Organization Xuzhou Xu Lun Rubber Co., Ltd.
Administrative Organization National Rubber and Rubber Technology Standardization Technical Committee branch Common test methods
Regulation (derived from) National Standards Bulletin 2014 No. 30
Proposing organization China Petroleum and Chemical Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the test methods and vulcanized rubber mix of sulfide sulfur content - determined using iodometry. This Standard applies to halogenated rubber, nitrile rubber and hydrocarbon rubber (including natural rubber) compounds and vulcaniz

Standards related to: GB/T 15252-2014

GB/T 15252-2014
GB
CS 83.060
G 40
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
Replacing GB/T 15252-1994
Rubber, compounded or vulcanized -
Determination of sulfide sulfur content -
Lodometric method
ISSUED ON. DECEMBER 22, 2014
IMPLEMENTED ON. JUNE 1, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
Introduction ... 5 
1 Scope ... 6 
2 Normative references ... 6 
3 Principle ... 6 
4 Reagents and materials ... 7 
5 Apparatus ... 7 
6 Sampling and sample preparation ... 10 
7 Procedures ... 10 
8 Expression of analysis results ... 11 
9 Test report ... 11 
Foreword
This Standard replaces GB/T 15252-1994 “Rubber - Determination of sulfide sulfur
content - Iodometric method.” Compared with the standard GB/T 15252-1994, the main
differences are as follows.
- MODIFY the standard name;
- ADD the foreword;
- ADD the warning;
- REVISE “cadmium acetate buffer solution” TO “zinc acetate buffer solution” (see
4.4, 4.2 of 1994 edition);.
- MODIFY the description of the surfactant solution (see 4.5, 4.4 of 1994 edition);
- ADD the description of “all-glass extraction device” (see 5.1);
- ADD the description of “reaction between hydrogen sulphide and absorption
device” (see 5.2);
- REVISE “burette” TO “brown burette” (see 5.6, 5.3 of 1994 edition);
- REVISE the reaction heating time from “30min ~ 40min” to “0min ~ 80min” (see
7.1.2, Chapter 6 of 1994 edition);
- MODIFY the description of “Analysis steps” (see Chapter 7, Chapter 6 of 1994
edition);
- ADD the content of the test report (see Chapter 9).
This Standard was proposed by China Petroleum and Chemical Industry Association.
This Standard shall be under the jurisdiction of the General Methods of Test Branch of
the National Standardization Technical Committee on Rubber and Rubber Technology
(SAC/TC 35/SC 2).
Responsible drafting organization of this Standard. Xuzhou Xugong Tyres Co., Ltd.
Participating drafting organizations of this Standard. Qingdao Yikesi New Material Co.,
Ltd., Guangzhou Institute of Synthetic Material Co., Ltd., Beijing Center for Physical
and Chemical Analysis, Beijing Research and Design Institute of Rubber Industry.
Main drafters of this Standard. Wei Bangfeng, Sheng Jie, Lin Qingju, Liu Xianlii, Tan
Hongyang, Jia Li, Bi Penghao, Ding Xiaoying.
Rubber, compounded or vulcanized - Determination of
sulfide sulfur content - Lodometric method
Warning. Personnel who use this Standard shall have experience of regular
laboratory work. This Standard does not point out all possible safety issues;
users have the responsibility to take appropriate safety and health measures,
and to ensure that it complies with the conditions specified in relevant national
regulations.
1 Scope
This Standard specifies the test methods for determination of sulfide sulfur content in
compounded and vulcanized rubber by iodometric method.
This Standard applies to compounded and vulcanized rubber of halogenated rubber,
nitrile rubber and hydrocarbon rubber (including natural rubber).
2 Normative references
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 601-2002 Chemical reagent - Preparations of standard volumetric solutions
GB/T 603-2002 Chemical reagent - Preparations of reagent solutions for use in
test methods
GB/T 3516-2006 Rubber - Determination of solvent extract
GB/T 6682-2008 Water for analytical laboratory use - Specification and test
methods
GB/T 17783-1999 Rubber, vulcanized - Preparation of samples and test pieces -
Chemical tests
3 Principle
For rubbers extracted by acetone, use the mixture of hydrochloric acid and acetic acid
5.5 25mL pipette (grade A).
5.6 Brown burette.
6 Sampling and sample preparation
6.1 CUT the needed samples from vulcanized rubber specimen and finished rubber
products according to the specifications in GB/T 17783-1999. For compounded rubber,
it shall be made into compounded rubber slices by open mills with a roll pitch of not
more than 0.5mm for 6 times at room temperature, and directly cut the test samples
into small particles with a side length of less than 1mm. Vulcanized rubber is directly
cut into small particles with a side length of less than 1mm.
6.2 WEIGH 0.5g ~ 2.0g of sample, accurate to 0.1mg.
6.3 WRAP the sample with filter paper, PLACE the sample in the the extraction unit
(5.1) containing acetone (4.2) to extract for 6h ~ 8h.
6.4 TRANSFER the sample from Soxhlet extraction bottle to a weighing bottle; DRY in
a 70°C oven for 15 min; PUT the dried sample into the extraction bottle (A).
7 Procedures
7.1 Determination
7.1.1 INSTALL the extraction bottle (A) at the unit shown in Figure 2, all connectors are
sealed with glycerin or petrolatum (4.10). ADD 100mL of zinc acetate buffer solution
(4.4) and 1mL of surfactant (4.5) into a conical flask (I). ADD zinc acetate buffer solution
into the gas washing bottle (B and C), until it fills half cylinder capacity. INLET nitrogen
(4.9), then adjust the flow rate of nitrogen in the absorption bottle to about one bubble
per second.
7.1.2 ADD 50mL of hydrochloric acid - acetic acid mixture solution (4.3) slowly from
the separating funnel (G) to the extraction bottle (A); HEAT slowly to boiling; MAINTAIN
at micro-boiling for 60min ~ 80min. After the termination of heating; ADD appropriate
nitrogen flow, to remove any residual hydrogen sulfide. At this moment, the solution in
the washing bottle (C) shall has no white precipitate. Otherwise, it must be remeasured
with a smaller sample or slower gas flow speed.
7.1.3 DISSEMBLE the receiver connector (E), to cool down the solution in the conical
flask to about 15°C; under cooling condition, accurately transfer iodine solution (4.6)
with a volume of 25.00mL into the conical flask (I) by a pipette, to make the iodine
excess. PLACE the Erlenmeyer flasks (I) in the dark for 20min to make the iodide
reacts with the precipitate adheres on the receiver; after the precipitate dissolving,
a) Standard number and name of this Standard;
b) Detailed description of test samples;
c) Test results;
d) Any anomalies observed during the determination;
e) All operations that are not included in this Standard;
f) Test date.
...