Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Oct 16, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

GB/T 11263-2010 (GBT 11263-2010)

GB/T 11263-2010_English: PDF (GBT11263-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 11263-2010English70 Add to Cart 0--10 minutes. Auto-delivered. Hot-rolled H and cut T section steel GB/T 11263-2010 Obsolete GB/T 11263-2010
 

BASIC DATA
Standard ID GB/T 11263-2010 (GB/T11263-2010)
Description (Translated English) Hot-rolled H and cut T section steel
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H44
Classification of International Standard 77.140.70
Word Count Estimation 23,269
Date of Issue 2010-12-23
Date of Implementation 2011-09-01
Older Standard (superseded by this standard) GB/T 11263-2005
Quoted Standard GB/T 222; GB/T 228.1; GB/T 229; GB/T 232; GB/T 700; GB 712; GB/T 714; GB/T 1591; GB/T 2101; GB/T 2975; GB/T 4171; GB/T 4336; GB/T 20066
Adopted Standard JIS G3192-2008, NEQ
Drafting Organization Maanshan Iron & Steel Co., Ltd.
Administrative Organization National Steel Standardization Technical Committee
Regulation (derived from) National Standard Approval Announcement 2010 No.10 (Total No.165)
Proposing organization China Iron and Steel Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the hot-rolled and hot-rolled H-beam steel mesh T 's T -beam order contents, classification, Code, dimensions, shape, test methods, , weight and tolerance, technical requirements for inspection rules, packaging, signs, quality certificates. This standard applies to hot-rolled H-beam (hereinafter referred to as H-beam) and H-beam split by the heat of the T -beam.

GB/T 11263-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.70
H 44
Replacing GB/T 11263-2005
Hot-rolled H and Cut T Section Steel
ISSUED ON. DECEMBER 23, 2010
IMPLEMENTED ON. SEPTEMBER 01, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine (AQSIQ);
Standardization Administration (SAC) of the People's
Republic of China.
Table of Contents
1 Scope ... 5 
2 Normative References ... 5 
3 Ordering Content ... 6 
4 Classification and Code ... 6 
5 Dimension, Shape, Weight and Permissible Deviation ... 7 
6 Technical Requirements ... 19 
7 Test Methods ... 21 
8 Inspection Rules ... 21 
9 Packaging, Marking and Quality Certificate ... 22 
Appendix A (Informative) Detailed Regulations for Rewelding of H Section Steel
and Cut T Section Steel ... 23 
Appendix B (Informative) Comparison of Types and Section Characteristic
Parameters of Joist Steel and H Section Steel ... 25 
Appendix C (Informative) Section Dimension, Section Area, Theoretical Weight
and Section Characteristic of Over-thick and Overweight H Section Steel ... 28 
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is not equivalent to Japanese JIS G3192-2008 "Dimensions, Mass and
Permissible Variations of Hot Rolled Steel Sections".
This standard replaces GB/T 11263-2005 "Hot-rolled H and Cut T Section Steel".
Compared with GB/T 11263-2005, the main changes of this standard are as follows.
— The types of H450×150, H475×150, H500×150 and H625×200 series and the
specification of H298×201×9×14 for H300×200 series were added.
— HP series and thickness dimension requirements were added.
— Values such as section area, theoretical weight and section characteristic
parameter were adjusted.
— For permissible deviation of dimension and shape of H section steel, the flange
bending and outer edge passivation requirements of flange leg end were added.
— The original Appendix A "Common Steel Designation and Mechanical Property
of Hot-rolled H Section Steel" was deleted, and Appendix A was changed into
"Rewelding Supplement Regulations for H Section Steel and Cut T Section
Steel".
— In Appendix B, the comparison for type and section characteristic parameter of
newly added joist steel and H section steel was updated.
— Appendix C "Section Dimension, Section Area, Theoretical Weight and Section
Characteristic of Over-thick and Overweight H Section Steel" was added.
Compared with JIS G3192-2008, the main changes of this standard are as follows.
— H section steel is divided into four categories according to wide flange, middle
flange, narrow flange and thin wall.
— 19 types for thin wall category were added.
— Types of H450×150, H475×150, H500×150, H550×200, H550×300, H625×200,
H650×300, H750×300, H850×300 and H1000×300 and other 19 specifications
were added.
— Partial cut T section steel type series were added.
— In Table 3, the thickness t1 was added with a column "less than 5mm"; the
Hot-rolled H and Cut T Section Steel
1 Scope
This standard specifies the ordering content, classification, code, dimensions, shape,
weight and permissible deviation, technical requirements, test methods, inspection
rules, packaging, marking and quality certificate of hot-rolled H section steel and T
section steel cut by hot-rolled H section steel.
This standard is applicable to hot-rolled H section steel (hereinafter referred to as "H
section steel") and T section steel cut by hot-rolled H section steel.
2 Normative References
The following documents are indispensable for the application of this document. For
dated references, only the dated edition applies. For undated references, the latest
edition (including all amendments) applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 228.1 Metallic Materials - Tensile Testing - Part 1. Method of Test at Room
Temperature (GB/T 228.1-2010, ISO 6892-1.2009, MOD)
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method (GB/T
229-2007, ISO 148-1.2006, MOD)
GB/T 232 Metallic Materials - Bend Test (GB/T 232-1999, eqv ISO 7438.1985(E))
GB/T 700 Carbon Structural Steels
GB 712 Hull Structural Steel
GB/T 714 Structural Steel for Bridge
GB/T 1591 High Strength Low Alloy Structural Steels
GB/T 2101 General Requirement of Acceptance Packaging, Marking and
Certification for Section Steel
GB/T 2975 Steel and Steel Products - Location and Preparation of Test Pieces for
Mechanical Testing (GB/T 2975-2008, eqv ISO 377.1997)
GB/T 4171 Atmospheric Corrosion Resisting Structural Steel
GB/T 4336 Standard Test Method for Spark Discharge Atomic Emission
Spectrometric Analysis of Carbon and Low-alloy Steel (Routine Method)
GB/T 20066 Steel and Iron - Sampling and Preparation of Samples for the
Determination of Chemical Composition (GB/T 20066-2006, ISO 14284.1998, IDT)
3 Ordering Content
According to this standard, the order contract shall contain the following technical
content.
a) Product name and category;
b) Designation;
c) Number of this standard;
d) Specification;
e) Delivery length;
f) Weight and quantity;
g) Other specific requirements proposed by the demander, for instance. special
specification requirement, special surface quality requirements, etc.
4 Classification and Code
4.1 H section steel is divided into four categories with code as follows.
Wide flange H section steel HW (W is the initial of Wide)
Middle flange H section steel HM (M is the initial of Middle)
Narrow flange H section steel HN (N is the initial of Narrow)
Thin wall H section steel HT (T is the initial of Thin)
4.2 Cut T section steel is divided three categories with code as follows.
Wide flange cut T section steel TW (W is the initial of Wide)
Middle flange cut T section steel TM (M is the initial of Middle)
Narrow flange cut T section steel TN (N is the initial of Narrow)
Table 1 Section Dimension, Section Area, Theoretical Weight and Section Characteristic of H Section Steel
Category Type
(height×width)/(mm×mm)
Section dimension/mm Section
area/cm2
Theoretical
weight/(kg/m)
Inertia moment/cm4 Inertia radius/cm Section
H B t1 t2 r Ix Iy ix iy Wx Wy
HW
100×100 100 100 6 8 8 21.58 16.9 378 134 4.18 2.48 75.6 26.7
125×125 125 125 6.5 9 8 30.00 23.6 839 293 5.28 3.12 134 46.9
150×150 150 150 7 10 8 39.64 31.1 1620 563 6.39 3.76 216 75.1
175×175 175 175 7.5 11 13 51.42 40.4 2900 984 7.50 4.37 331 112
200×200 200 200 8 12 13 63.53 49.9 4720 1600 8.61 5.02 472 160
*200 204 12 12 13 71.53 56.2 4980 1700 8.34 4.87 498 167
250×250
*244 252 11 11 13 81.31 63.8 8700 2940 10.3 6.01 713 233
250 250 9 14 13 91.43 71.8 10700 3650 10.8 6.31 860 292
*250 255 14 14 13 103.9 81.6 11400 3880 10.5 6.10 912 304
300×300
*294 302 12 12 13 106.3 83.5 16600 5510 12.5 7.20 1130 365
300 300 10 15 13 118.5 93.0 20200 6750 13.1 7.55 1350 450
*300 305 15 15 13 133.5 105 21300 7100 12.6 7.29 1420 466
350×350
*338 351 13 13 13 133.3 105 27700 9380 14.4 8.38 1640 534
*344 348 10 16 13 144.0 113 3280 11200 15.1 8.83 1910 646
*344 354 16 16 13 164.7 129 34900 11800 14.6 8.48 2030 669
350 350 12 19 13 171.9 135 39800 13600 15.2 8.88 2280 776
*350 357 19 19 13 196.4 154 42300 14400 14.7 8.57 2420 808
400×400
*388 402 15 15 22 178.5 140 49000 16300 16.6 9.54 2520 809
*394 398 11 18 22 186.8 147 56100 18900 17.3 10.1 2850 951
*394 405 18 18 22 214.4 168 59700 20000 16.7 9.64 3030 985
400 400 13 21 22 218.7 172 66600 22400 17.5 10.1 3330 1120
*400 408 21 21 22 250.7 197 70900 23800 16.8 9.74 3540 1170
*414 405 18 28 22 295.4 232 92800 31000 17.7 10.2 4480 1530
*428 407 20 35 22 360.7 283 119000 39400 18.2 10.4 5570 1930
*458 417 30 50 22 528.6 415 187000 60500 18.8 10.7 8170 2900
*498 432 45 70 22 770.1 604 298000 94400 19.7 11.1 12000 4370
500×500 *492 465 15 20 22 258.0 202 117000 33500 21.3 11.4 4770 1440
*502 465 15 25 22 304.5 239 146000 41900 21.9 11.7 5810 1800
800 300 14 26 18 263.5 207 286000 11700 33.0 6.66 7160 781
850×300
*834 298 14 19 18 227.5 179 251000 8400 33.2 6.07 6020 564
*842 299 15 23 18 259.7 204 298000 10300 33.9 6.28 7080 687
*850 300 16 27 18 292.1 229 346000 12200 34.4 6.45 8140 812
*858 301 17 31 18 324.7 255 395000 14100 34.9 6.59 9210 939
900×300
*890 299 15 23 18 266.9 210 339000 10300 35.6 6.20 7610 687
900 300 16 28 18 305.8 240 404000 12600 36.4 6.42 8990 842
*912 302 18 34 18 360.1 283 491000 15700 36.9 6.59 10800 1010
1000×300
*970 297 16 21 18 276.0 217 393000 9210 37.8 5.77 8110 620
*980 298 17 26 18 315.5 248 472000 11500 38.7 6.04 9630 772
*990 298 17 31 18 345.3 271 544000 13700 39.7 6.30 11000 921
*1000 300 19 36 18 395.1 310 634000 16300 40.1 6.41 12700 1080
*1008 302 21 40 18 439.3 345 712000 18400 40.3 6.47 14100 1220
HT
100×50 95 48 3.2 4.5 8 7.620 5.98 115 8.39 3.88 1.04 24.2 3.49
97 49 4 5.5 8 9.370 7.36 143 10.9 3.91 1.07 29.6 4...