Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)

GB/T 1047-2005 (GBT1047-2005)

GB/T 1047-2005_English: PDF (GBT 1047-2005, GBT1047-2005)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 1047-2005English70 Add to Cart 0--9 seconds. Auto-delivery Pipework components -- Definition and selection of DN (nominal size) Obsolete GB/T 1047-2005

BASIC DATA
Standard ID GB/T 1047-2005 (GB/T1047-2005)
Description (Translated English) Pipework components. Definition and selection of DN(nominal size)
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J15
Classification of International Standard 23.040.60
Word Count Estimation 4,427
Date of Issue 2005-01-13
Date of Implementation 2005-08-01
Older Standard (superseded by this standard) GB/T 1047-1995
Adopted Standard ISO 6708-1995; MOD
Drafting Organization Mechanical Engineering Research Institute
Administrative Organization National Standardization Technical Committee piping accessories
Regulation (derived from) Announcement of Newly Approved National Standards No. 2, 2005 (No. 76 overall)
Proposing organization China Machinery Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
Summary This standard specifies: DN-definition and series. This standard applies to: Use the DN identity as specified in the relevant standard piping components.

Standards related to: GB/T 1047-2005

GB/T 1047-2005
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.040.60
J 15
Replacing GB/T 1047-1995
Pipework components - Definition
and selection of DN (nominal size)
(ISO 6708.1995, MOD)
ISSUED ON. JANUARY 13, 2005
IMPLEMENTED ON. AUGUST 01, 2005
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Definition ... 4 
3 DN series ... 4 
Pipework components - Definition
and selection of DN (nominal size)
1 Scope
This standard specifies the definition and series of DN (nominal size).
This standard applies to pipework components specified in the relevant
standards using the DN marking.
Note. Other size marking methods different from this standard can also be used,
such as the pipework components of threading, press fitting, socket welding or
butt welding, or the pipework components which are marked by NPS (nominal
pipe size), OD (outer diameter), ID (inner diameter) or G (pipe thread size
marking).
2 Definition
DN. Size marking for the combination of letters and numbers for piping system
components. It consists of the letter DN followed by a dimensionless integer
number. This number is directly related to the feature size such as the hole
diameter or outer diameter (in mm) of the end connector.
Note 1. Except as otherwise provided in the relevant standards, the number
after the letter DN does not represent the measured value and cannot be used
for calculation purposes.
Note 2. For those standards using the DN marking system, it shall give the
relationship between the DN and the size of the pipework components, such as
DN/OD or DN/ID.
3 DN series
The preferred DN values are as follows.
...