GB 29540-2013 PDF English
US$90.00 · In stock · Download in 9 secondsGB 29540-2013: Minimum allowable values of the energy efficiency and energy efficiency grades for lithium bromide absorption chillers Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 29540-2013 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Minimum allowable values of the energy efficiency and energy efficiency grades for lithium bromide absorption chillers
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 29540-2013
GB 29540-2013: Minimum allowable values of the energy efficiency and energy efficiency grades for lithium bromide absorption chillers
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB29540-2013
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 27.010
F 01
Minimum allowable values of the energy
efficiency and energy efficiency grades for
lithium bromide absorption chillers
Issued on: JUNE 09, 2013
Implemented on: OCTOBER 01, 2013
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1. Scope ... 4
2. Normative references ... 4
3. Terms and definitions ... 4
4. Technical requirements ... 5
5. Test methods ... 6
6. Inspection rules ... 6
Foreword
Article 4.2 in this Standard is mandatory; the rest are recommended.
This Standard is drafted based on rules given in GB/T 1.1-2009.
This Standard was proposed by the Resources Economization & Environmental Protection
Department under the National Development and Reform Commission, and the Energy
Conservation and Comprehensive Utilization Department under the Ministry of Industry
and Information.
This Standard shall be under the jurisdiction of the National Technical Committee on
Energy Fundamentals and Management of Standardization Administration of China
(SAC/TC 20).
Drafting organizations of this Standard. China National Institute of Standardization, Dalian
Sanyo Refrigeration Co., Ltd., Hefei General Machinery Research Institute, Yantai EBARA
Air Conditioning Equipment Co., Ltd., Jiangsu Shuangliang Eco-energy Systems Co., Ltd.,
Broad Air Conditioning Co., Ltd., China Refrigeration and Air-conditioning Industry
Association, Johnson Controls Asia Technical Center, Hope Deepblue Air-conditioning
Manufacture Co., Ltd., and LS Air Conditioning System Co., Ltd.
Main drafters of this Standard. CHENG Jianhong, MI Hua, ZHANG Mingsheng, WANG
Pengcheng, LIU Meng, LIU Xiaoli, TAN Yongqiang, KANG Xiangjiu, DAI Shilong, HU
Xianghua, LI Yan, HAN Shiqing, LI Qianbo, and CHU Rihe.
Minimum Allowable Values of the Energy Efficiency
and Energy Efficiency grades for Lithium Bromide
Absorption Chillers
1. Scope
This Standard specifies the minimum allowable values of energy efficiency, evaluating
values of energy conservation, energy efficiency grades, test methods, and inspection
rules for lithium bromide absorption chillers.
This Standard is applicable to lithium bromide absorption chillers for air conditioning use
or industry use, with steam as heat source, or with the direct combustion of fuel or fuel gas
as heat source, but not applicable to chillers with 2 or more combined heat sources.
2. Normative references
The following documents are indispensable for application of this document. For the dated
documents so quoted, only the dated versions apply to this document. For the undated
documents so quoted, the latest versions (including all modification sheets) apply to this
document.
GB/T 18362 Direct-fired lithium bromide absorption water chiller (heater)
GB/T 18431 Steam and hot water type lithium bromide absorption water chiller
3. Terms and definitions
For the purpose of this Standard, the terms and definitions in GB/T 18362 and in GB/T
18431 shall apply.
3.1 Minimum allowable values of energy efficiency for lithium bromide absorption
chillers
Under the specified working conditions, for the steam unit, it refers to the maximum
allowable volume of steam that is consumed to make one unit of refrigerating capacity; for
the direct-fired unit, it refers to the minimum value of performance coefficient.
3.2 Evaluating values of energy conservation for lithium bromide absorption chillers
5. Test methods
Test shall be conducted in accordance with the methods specified in GB/T 18341 or GB/T
18362, according to any one of the working conditions as specified in GB/T 18431 or GB/T
18362. The actual tested values shall be corrected to two decimal places.
6. Inspection rules
Tale one sample from the same batch of products; test its consumed volume of steam to
make one unit of refrigerating capacity or performance coefficient. If it fails to satisfy the
requirements, take another two samples to conduct the test. The actual tested values shall
all satisfy the requirements, otherwise, this batch of products are judged as unqualified.
For single product, test its consumed volume of steam to make one unit of refrigerating
capacity or performance coefficient; if it fails to satisfy the requirements, this product is
judged as unqualified.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 29540-2013 be delivered?Answer: The full copy PDF of English version of GB 29540-2013 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 29540-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB 29540-2013_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 29540-2013 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 29540-2013?A step-by-step guide to download PDF of GB 29540-2013_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 29540-2013".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|