GB 19260-2016_English: PDF (GB19260-2016)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB 19260-2016 | English | 90 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Structure requirements of low floor city-bus and low entry city-bus
| Valid |
GB 19260-2016
|
Standards related to: GB 19260-2016
Standard ID | GB 19260-2016 (GB19260-2016) | Description (Translated English) | Structure requirements of low floor city-bus and low entry city-bus | Sector / Industry | National Standard | Classification of Chinese Standard | T42 | Word Count Estimation | 8,879 | Date of Issue | 2016-12-30 | Date of Implementation | 2017-07-01 | Older Standard (superseded by this standard) | GB/T 19260-2003 | Quoted Standard | GB 13094; GB 30678 | Drafting Organization | Jinhua Youth Automobile Manufacturing Co., Ltd | Administrative Organization | National Automotive Standardization Technical Committee (SAC/TC 114) | Regulation (derived from) | National Standard Notice No.27 of 2016 | Proposing organization | Ministry of Industry and Information Technology | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | Summary | This standard specifies the definition and structural requirements for low-floor and low-entry city buses. This standard applies to low-floor (single, double, articulated) city buses and low entry (single, double, articulated) city buses in class I passenger cars. |
GB 19260-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.080.20
T 42
Replacing GB/T 19260-2003
Structure Requirements of Low
Floor Public Bus and Low Entry Public Bus
ISSUED ON. DECEMBER 30, 2016
IMPLEMENTED ON. JULY 1, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Requirements ... 6
Foreword
The Chapter 4 in this Standard is mandatory, while the rest are recommended.
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 19260-2003 Structure Requirements of Low Floor City-
Bus and Low Entry City-Bus; compared with GB/T 19260-2003, this Standard has the
following major changes of technical contents besides the editorial modifications.
--- The standard nature is changed from recommended into mandatory;
--- The change of standard scope (see Chapter 1 of this Edition; Chapter 1 of 2003
Edition);
--- Modified the terms and definitions (see Chapter 3 of this Edition; Chapter 3 of
2003 Edition);
--- Deleted the requirements of strength and stiffness (see 4.1 of 2003 Edition);
--- Modified the requirements of roll stability (see 4.1 of this Edition; 4.2.1.1 and
4.2.1.2 of Edition 2003);
--- Listed separately the requirements of articulated bus by the longitudinal
permeability radius of permeability (see 4.2 of this Edition; and 4.2.2 of Edition
2003);
--- Added the requirements that air suspension and body lifting system shall be
equipped for the low floor public bus with body length greater than 9m; the
requirements that air suspension shall be equipped for the low entry public bus
with body length greater than 9m (see 4.3 of this Edition);
--- Modified the provisions of the number of exits (see 4.4.1.1~4.4.1.5 of this Edition;
4.3.1.1 and 4.3.1.2 of 2003 Edition);
--- Modified the provisions of the minimum size of the exit (see 4.4.2 of this Edition;
4.3.2 of 2003 Edition);
--- Added the requirements of exit position and exit technology (see 4.4.3 of this
Edition);
--- Added the requirements of exit mark (see 4.4.4 of this Edition);
--- Modified the provisions of width of channel between the front hoods, and the
width of channel between the rear hoods; added the measurement range of width
of channel between hoods (see 4.5.1.1.1, 4.5.1.1.2, 4.5.1.1.3 of this Edition; and
4.4.1.1.1 and 4.4.1.1.2 of Edition 2003);
--- Added the requirements of measurement state of the one-step height from the
ground (see 4.5.2.1 of this Edition);
--- Deleted the provisions of channel floor height, modified the provisions of the one-
step height from the ground (see 4.5.2.2 of this Edition; 4.4.1.3 of 2003 Edition);
--- Modified the height limit value within the compartment (see 4.5.3 of this Edition;
4.4.3 of 2003 Edition);
--- Deleted the requirements of setting wheelchair on top window or stroller parking
area, and the provisions of handrails (see 4.3.1.3, 4.4.2 and 4.4.4 of 2007 Edition)
--- Added that the low floor public bus and low entry public bus shall meet the
structural safety requirement of Class-I bus stipulated in GB 13094 (see 4.6 of
this Edition).
This Standard was proposed by the Ministry of Industry and Information Technology.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Automotive (SAC/TC 114).
Drafting organizations of this Standard. Jinhua Youngman Automobile Manufacturing
Co., Ltd.
Participating drafting organizations of this Standard. Shanghai Wanxiang Automobile
Co., Ltd., Anhui Ankai Automobile Co., Ltd., China Highway Vehicle & Machinery Co.,
Ltd., Zhengzhou Yutong Bus Co., Ltd., Chongqing Vehicle Test Research Institute Co.,
Ltd., Technical Center of Dongfeng Commercial Vehicle Co., Ltd., Chongqing
Hengtong Bus Co., Ltd., Xiamen King Long United Automotive Industry Co., Ltd.,
Xiamen Golden Dragon Bus Co., Ltd., Beiqi Foton Motor Co., Ltd., Yangzhou Yaxing
Motor Coach Co., Ltd., Henan Shaolin Bus Co., Ltd., Higher Bus Company Limited,
Chengdu Bus Co., Ltd., Zhongtong Bus Holding Co., Ltd., China FAW Group
Corporation, Dandong Huanghai Automobile Co., ltd., Shanxi Automobile Group Co.,
Ltd., Guilin Bus Industrial Group Co., Ltd., Beijing Public Transport Holdings (Group)
Co., Ltd., Hangzhou Public Transport Group Co., Ltd., and Guangzhou No.2 Bus
Company.
Chief drafting staffs of this Standard. Li Jianfang, Fang Peijin, Diao Wei, Pei Zhihao,
Huan Xiaoli, Zhao Lixiang, Guo Zhiyong, Yao Bo, Xu Maolin, Yang Qingquan, Zheng
Hongjun, Wang Yongtao, Wang Jianzhong, Liu Jihong, Chen Qingdi, Zhang Peng,
Fang Yuanhua, Ren Yi, Li Chen, Zhou Jianguo, Li Guilan, Chen Weiyang, and Liang
Kai.
The historical edition replaced by this Standard is as follows.
--- GB/T 19260-2003.
Structure Requirements of Low
Floor Public Bus and Low Entry Public Bus
1 Scope
This Standard specifies the definitions and structural requirements of low floor public
bus and low entry public bus.
This Standard is applicable to the low floor (single-deck, double-deck, articulated)
public bus, and low entry (single-layer, double-layer, articulated) public bus of the
Class-I bus.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB 13094 The Safety Requirement for Bus Construction
GB 30678 Safety Signs and Information Symbols for the Use of Bus
3 Terms and Definitions
The following terms and definitions stipulated in GB 13094 are applicable to this
document.
3.1 Low floor public bus
The city bus forming a stepless single area in the central channel floor from the front
passenger door to the last axis centerline (or beyond the centerline) within the
compartment (the double-deck bus indicates the lower compartment); with each
passenger door of one-step.
3.2 Low entry public bus
The city bus forming a stepless single area in the central channel floor from front
...
|