HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 15741-1995 PDF English

US$70.00 · In stock · Download in 9 seconds
GB 15741-1995: [Including 2023XG1] The licence plates (brackets) and its position on motor vehicles and trailer
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB 15741-1995English70 Add to Cart 0-9 seconds. Auto-delivery [Including 2023XG1] The licence plates (brackets) and its position on motor vehicles and trailer

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB 15741-1995
      

Similar standards

GB/T 34622   GB/T 26988   GB/T 26780   GB/T 43947   

GB 15741-1995: [Including 2023XG1] The licence plates (brackets) and its position on motor vehicles and trailer


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB15741-1995
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.040.50 T 20 The License Plates (Brackets) and its Position on Motor Vehicles and Trailer [Including Amendment List 2023XG1] Issued on. NOVEMBER 16, 1995 Implemented on. JANUARY 01, 1997 Issued/Approved by. State Bureau of Technical Supervision

Table of Contents

1 Subject Contents and Applicable Scope... 3 2 Normative References... 3 3 Terms and Definitions... 3 4 Shape and Dimension of License Plate... 3 5 Position of License Plate (Bracket)... 3 6 Visual Range... 5 7 Strength of License Bracket... 5 Additional Information... 5 No.1 Amendment List (2023XG1)... 6 The License Plates (Brackets) and its Position on Motor Vehicles and Trailer

1 Subject Contents and Applicable Scope

This Standard specifies the shape, dimension, position and strength requirements for motor vehicles and trailers. This Standard is applicable to the Category-M, Category-N and Category-O vehicles.

2 Normative References

GA 36 License Plates of Motor Vehicles of the Peoples Republic of China GB/T 15089 Classification of Power-Driven Vehicles and Trailers

3 Terms and Definitions

3.1 License plate The plate directly installed the license.

4 Shape and Dimension of License Plate

The license plate can be a rectangular flat plate (it can be a curved surface when meeting the requirements for the installation of license plate).

5 Position of License Plate (Bracket)

After installing the license to the license plate (bracket), it shall not affect the approach angle and departure angle of the vehicle design. 5.1 Position of front license plate (bracket) The front license plate (bracket) is located on the front bumper of the vehicle. 5.2 Position of rear license plate (bracket) The rear license plate (bracket) is located on the rear end of the vehicle. 5.2.1 The license installed on the rear license plate (bracket) shall be perpendicular or approximately perpendicular to the longitudinal symmetry plane of the vehicle. The midpoint of the rear license shall not be on the right side of the longitudinal symmetry plane of the vehicle; while the rear license and license bracket shall not exceed the left edge of the rear end of the vehicle. 5.2.2 The license installed on the rear license plate (bracket) shall be basically perpendicular to the horizontal plane. 5.2.3 The height of the lower edge of license installed on the rear license plate (bracket) from the ground shall be no less than 0.30m; while the height of the upper edge from the ground shall be no greater than 1.20m.

6 Visual Range

The license installed on the license plate (bracket) shall be visible in the following spatial range, which consists of the following four planes. two vertical planes that pass through the two sides of the license, and form outward angle of 30°;

7 Strength of License Bracket

After installing the license, the license bracket shall be ensured without looseness or deformation under the normal use of the vehicle; and shall not be disassembled under the case of disassembling or no damage of the license. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB 15741-1995 be delivered?

Answer: The full copy PDF of English version of GB 15741-1995 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 15741-1995_English with my colleagues?

Answer: Yes. The purchased PDF of GB 15741-1995_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB 15741-1995 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB 15741-1995?

A step-by-step guide to download PDF of GB 15741-1995_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 15741-1995".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9