CQC-C1106-2014 PDF English
US$145.00 · In stock · Download in 9 secondsCQC-C1106-2014: China Compulsory Certification Implementation Detailed-Rules - Motor vehicle brake hose Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| CQC-C1106-2014 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
China Compulsory Certification Implementation Detailed-Rules - Motor vehicle brake hose
| |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: CQC-C1106-2014
CQC-C1106-2014: China Compulsory Certification Implementation Detailed-Rules - Motor vehicle brake hose
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/CQC-C1106-2014
Serial No.. CQC-C1106.2014
China Compulsory Certification
Implementation Detailed-Rules
Brake Hose of Motor Vehicle
Issued on: DECEMBER 31, 2014
Implemented on: JANUARY 1, 2015
China Quality Certification Center
3.No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
0.Introduction... 5
0.1 Terms and Definitions... 5
0.2 Classification Management Requirements of Manufacturing Enterprises... 6
0.3 Requirements on Utilizing Testing Resources of Manufacturing Enterprises... 8
1.Application Scope... 9
2.Certification Standards... 9
3.Certification Mode... 9
3.1 Basic Certification Mode... 9
3.2 Applicability of Certification Mode... 9
4.Division of Certification Units... 10
5.Certification Entrusting... 10
5.1 Proposal and Acceptance of Certification Application... 10
5.2 Application Materials... 11
5.3 Implementation Arrangement... 12
6.Implementation of Certification... 12
6.1 Type Test... 12
6.2 Initial Factory Inspection... 16
6.3 Certification Evaluation and Determination... 19
6.4 Certification Time-limit... 19
6.5 Service-parts of discontinued vehicle model... 19
7.After-Certification Supervision... 19
7.1 After-certification follow-up inspection... 19
7.2 Sampling Test or Inspection at the Production On-site... 20
7.3 Market Sampling Test or Inspection... 21
7.4 Frequency and Time of After-Certification Supervision... 21
7.5 Record of After-Certification Supervision... 22
7.6 Evaluation of Supervision Result after getting the certificate... 22
8.Certificate... 22
8.1 Maintenance of the certificate... 22
8.2 Content of the Certificate... 22
8.3 Change of the Certificate... 23
8.4 Cancellation, Suspension and Withdrawal of the Certificate... 24
8.5 Use of the Certificate... 24
9.Certification Mark... 24
9.1 Mark style permitted to use... 24
9.2 Use Requirements... 25
10.Charge... 25
11.Certification Responsibility... 25
12.Procedures and Time-limit Related to Technical Disputes, Complaints and Appeals. 25
Attachment I Requirements of... 27
Conformity of Production Control Plan... 27
Attachment II Certification Implementation of Service Parts for After-sales Maintenance
for Discontinued Vehicle Model... 30
0.Introduction
“China Compulsory Certification Implementation Detailed-Rules - Brake Hose of Motor
Vehicle” (hereinafter referred to as Implementation Detailed-Rules) is compiled based
on the requirements of “Implementation Rules for China Compulsory Certification -
Brake Hose of Motor Vehicle” (CNCA-C11-04.2014) (hereinafter referred to as
Implementation Rules). This Implementation Detailed-Rules is used together with the
Implementation Rules as supportive document.
The product scope, certification basis and all other contents of this Implementation
Detailed-Rules shall comply with relevant provisions of Implementation Rules. It shall
also be adjusted according to the Notices such as defined directory and directory
adjustment that are issued by Certification and Accreditation Administration of the
People’s Republic of China (hereafter referred to as CNCA).
In accordance with the provisions of Implementation Rules, following the principles of
maintaining the effectiveness of product certification, improving quality of product,
serving certification companies, and controlling risk of certification, CQC formulates
and issues this Certification Implementation Detailed-Rules. Through establishing the
classification management requirements of manufacturing enterprises, and combining
the classification of manufacturing enterprises, this Detailed-Rules determines the
implementation requirements for China compulsory certification of brake hose of motor
vehicles.
0.1 Terms and Definitions
0.1.1 Brake hose. flexible hoses used to transmit or store hydraulic pressure,
pneumatic pressure or vacuum to provide braking force to the braking system. The
following also referred to as hose.
Brake hose assembly. composed by brake hose and brake hose end fitting, and brake
hose and brake hose end fitting are permanently connected.
0.1.2 Testing at Manufacturer’s Premises (abbreviated as TMP mode)
It means that the engineers of designated laboratory use the testing equipment in the
factory laboratory to conduct testing. The factory shall dispatch test personnel to
provide assistance. The designated laboratory will examine, approve and issue the
test report.
0.1.3 Witnessed Manufacturer’s Testing (abbreviated as WMT mode)
It means that the engineer of designated laboratory witnesses the factory laboratory’s
test conditions and all tests completed by using the laboratory’s equipment or
according to the test plan submitted; or witnesses part of the test conditions and the
test items. Test personnel of the factory laboratory shall provide the original records
In case there is any change, the documents publicized by CQC shall prevail. In
principle, the classification result of manufacturing enterprises shall be upgraded
according to the sequence of D-C-B-A; and downgraded according to the sequence of
A-B-C-D or it may be directly downgraded to the corresponding category according to
the risk evaluation.
0.3 Requirements on Utilizing Testing Resources of Manufacturing Enterprises
0.3.1 Scope
Applicable to after-certification supervision sampling test and supplementary
difference-test when the certificate is changed.
0.3.2 Implementation
If the manufacturing enterprise has the testing equipment and testing capacity that are
required by “Implementation Rules for China Compulsory Certification. Utilization
Requirements of Testing Resources and Other Certification Results of the
Manufacturing Enterprise” and the certification standards, then the CLIENT,
manufacturer, or manufacturing enterprise can apply for testing to utilize the testing
resources of the manufacturing enterprise (hereinafter referred to as the factory
laboratory) and perform the self-inspection. The self-inspection result and relevant
materials shall be submitted to CQC for review. The factory laboratories of which the
materials pass the review are allowed to perform TMP or WMT (hereinafter also
referred to as on-site test) with factory laboratory resources.
In principle, CQC shall not organize inspection only for factory laboratory. Generally,
factory laboratory inspection application of the CLIENT shall be proposed together with
on-site test application. CQC shall organize the technical specialists from designated
laboratories to perform both inspections. Inspection group shall inspect the laboratory
capability first; and keep the relevant inspection and assessment record; after
conformance, then perform production on-site inspection.
0.3.3 Qualification maintenance
CQC shall perform regular (such as once a year, or adjusted according to frequency)
supervision to the certified factory laboratory. In principle, laboratory supervision shall
be made together with after-certification supervision. Factory laboratory shall take part
in contrast test to ensure the test accuracy and maintain the qualification.
When it is needed by the manufacturing enterprise, it can perform single test in
response to the on-site test raised by CLIENT; the test result is only applicable to this
on-site test. The factory laboratory may be exempted from supervision to maintain the
qualification. When there is same-item requiring for on-site test, application for
approval shall be made again.
6.1.2.1 Type test samples shall be regular products of manufacturing enterprise of
CLIENT. CLIENT shall promise that all samples are consistent with actual produced
products, and are not allowed to borrow, rent or purchase samples for test. CQC and/or
designated laboratory shall check the authenticity of samples provided by the CLIENT.
When laboratory is not sure about the authenticity of samples, it shall report to CQC
and handle it accordingly.
6.1.2.2 Sample submission/sampling mode
CLIENT shall prepare samples in accordance with type test plan, and send the
samples to designated laboratory. When required by CLIENT, CQC may arrange
inspectors to sample when performing production conformity inspection of 6.2.3.In this
case, Sampling shall be made on the premise that factory inspection is concluded as
qualified; or there is conformity item, it needs the written-mode to verify the
effectiveness of corrective measures.
In principle, manufacturing enterprises shall send the samples to designated laboratory
...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of CQC-C1106-2014 be delivered?Answer: The full copy PDF of English version of CQC-C1106-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of CQC-C1106-2014_English with my colleagues?Answer: Yes. The purchased PDF of CQC-C1106-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- CQC-C1106-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of CQC-C1106-2014?A step-by-step guide to download PDF of CQC-C1106-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "CQC-C1106-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|