YY/T 1629.3-2022 English PDFUS$319.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY/T 1629.3-2022: Cutting tools for electric osseous tissue surgical equipment - Part 3: Drill Status: Valid
Basic dataStandard ID: YY/T 1629.3-2022 (YY/T1629.3-2022)Description (Translated English): Cutting tools for electric osseous tissue surgical equipment - Part 3: Drill Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended) Classification of Chinese Standard: C35 Word Count Estimation: 15,112 Issuing agency(ies): State Drug Administration YY/T 1629.3-2022: Cutting tools for electric osseous tissue surgical equipment - Part 3: Drill---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Cutting tools for electric osseous tissue surgical equipment - Part 3.Drill ICS 11.040.30 CCSC35 People's Republic of China Pharmaceutical Industry Standard Electric bone tissue surgery equipment knife Part 3.Drill Bits Published on 2022-05-18 2023-06-01 Implementation Released by the State Drug Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is part 3 of YY/T 1629 "Electric Bone Tissue Surgery Equipment and Knives". YY/T 1629 has issued the following parts. --- Part 1.Grinding head; --- Part 2.Skull drill bits; --- Part 3.Drill bits; --- Part 4.Milling cutters; --- Part 5.Saw blades; --- Part 6.Files. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by the State Drug Administration. This document is approved by the National Medical Electrical Equipment Standardization Technical Committee Medical Electronic Instrument Standardization Sub-Technical Committee (SAC/TC10/SC5) focal point. This document is drafted by. Chongqing Xishan Technology Co., Ltd., Shanghai Medical Device Testing Institute, Chongqing Medical Device Quality Inspection center. The main drafters of this document. Guo Yijun, Xu Chao, Zhou Qing, Yang Yongbo, Meng Mingjiang, Zheng Wenhao.IntroductionThe series of product standards of "Electric Bone Tissue Surgery Equipment and Knives" are divided into six parts. Supplement to "Preparation". --- Part 1.Grinding head. The purpose is to standardize the safety and performance requirements of the grinding head in the electric bone tissue surgery equipment. --- Part 2.Skull drill bits. The purpose is to standardize the safety and performance of the skull drill in the matching tool for electric bone tissue surgery equipment Require. --- Part 3.Drill bits. The purpose is to standardize the safety and performance requirements of drill bits in electric bone tissue surgery equipment. --- Part 4.Milling cutters. The purpose is to standardize the safety and performance requirements of milling cutters in electric bone tissue surgery equipment. --- Part 5.Saw blades. The purpose is to standardize the safety and performance requirements of saw blades in electric bone tissue surgery equipment. --- Part 6.Files. The purpose is to standardize the safety and performance requirements of the files in the electric bone tissue surgery equipment. Electric bone tissue surgery equipment knife Part 3.Drill Bits1 ScopeThis document specifies the terms and definitions, structural types, materials, requirements, test methods, descriptions of electric bone tissue surgery equipment cutter bits book and logotype. This document is applicable to drills (with or without mechanical rotation) powered by electric bone tissue surgical equipment to perform drilling on bone tissue. hereinafter referred to as the product).2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 1220 stainless steel rod GB/T 4340.1 Vickers Hardness Test for Metal Materials Part 1.Test Methods GB/T 6682 Analysis Laboratory Water Specifications and Test Methods GB/T 14233.1 Test methods for medical infusion, blood transfusion and injection equipment - Part 1.Chemical analysis methods YY/T 0752 Electric bone tissue surgery equipment Pharmacopoeia of the People's Republic of China3 Terms and DefinitionsYY/T 0752 and the following terms and definitions apply to this document. For ease of use, the list is repeated below Some terms and definitions in YY/T 0752. 3.1 drill Powered by electric bone tissue surgical equipment to perform mechanical rotation motion, a tool for drilling bone tissue, usually composed of a drill body, a rod part, the interface structure part. 3.2 mobile phone handpiece A component held by an operator and capable of driving the held surgical tool for surgical purposes. The mobile phone can be integrated or split, split The type consists of a (power) handle that can provide power to the machine head, a machine head that clamps the tool, and (or) a variable speed and direction change mechanism. 3.3 drill body The part of the drill bit from the end of the chip flute to the chisel edge is composed of a drill tip, a margin and a chip flute, and is shaped like a twist. 3.4 Drill point The cutting function part of the drill. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 1629.3-2022_English be delivered?Answer: Upon your order, we will start to translate YY/T 1629.3-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY/T 1629.3-2022_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 1629.3-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
