YY/T 1506-2016 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1506-2016: Implants for surgery--Test method for driving torque of metallic bone screws
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1506-2016	119	Add to Cart	3 days	Implants for surgery--Test method for driving torque of metallic bone screws	Valid

Similar standards

YY/T 1860.1   YY/T 1748   YY/T 1653   YY/T 1503   YY/T 1502   

Basic data

Standard ID: YY/T 1506-2016 (YY/T1506-2016)
Description (Translated English): Implants for surgery--Test method for driving torque of metallic bone screws
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C35
Word Count Estimation: 6,653
Date of Issue: 2016-07-29
Date of Implementation: 2017-06-01
Quoted Standard: JJG 269
Adopted Standard: ASTM F 543-2013, NEQ
Regulation (derived from): State Food and Drug Administration Notice 2016 (No.129)
Issuing agency(ies): State Food and Drug Administration
Summary: This standard is applicable to measuring the torque required for screwing out the standard material by screwing the metal screw (hereinafter referred to as "screw"). The results obtained using this standard are not directly related to the rotational torque required for the screw to be inserted into the human bone. The purpose of this standard is to confirm the consistency of the tested product.

YY/T 1506-2016: Implants for surgery--Test method for driving torque of metallic bone screws

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Implants for surgery - Test method for driving force of metallic bone screws ICS 11.040.40 C35 People's Republic of China Pharmaceutical Industry Standard Surgical Implants Metal Bone Screws Rotational torque test method 2016-07-29 released 2017-06-01 implementation State Food and Drug Administration issued

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. The use of re-drafting of this standard refers to ASTM F543-2013 Appendix A2 "Medical metal screw screw rotation test method" prepared by. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This standard is proposed by the State Food and Drug Administration. This standard by the National Surgical Implantation and Orthopedic Equipment Standardization Technical Committee Orthopedic Implants Sub-Technical Committee (SAC/TC110 / SC1). The standard drafting unit. Tianjin Medical Device Quality Supervision and Inspection Center, a medical device China (limited) company. The main drafters of this standard. Zhang, Li Wenjiao, Wang Zuoxiao, Chen Changsheng, Wang Jian. Surgical Implants Metal Bone Screws Rotational torque test method

1 Scope

This standard is used to measure the torque required for the metal screw (hereinafter referred to as "screw") to be screwed into the standard material. Use this standard The result is not directly related to the rotational torque required for the screw to be inserted into the human bone. The purpose of this standard is to confirm only one of the tested products To cause.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. JJG269 Torsion Testing Machine Verification Regulation

3 equipment

3.1 Test device The device shown in Fig. 1 can be applied to a screw-in torque test. The test device shall be capable of testing with ASTM F1839 material Block, test block fixture, drill sleeve and description of the drill sleeve clamp tooling fit. The test device should have sufficient stiffness to allow the test to be loaded No deflection or deformation occurs. Figure 1 Rotational torque test device 3.2 Torque sensor The converter that converts the applied torque into a continuously recordable electrical signal is calibrated within the range of the range used in the test. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1506-2016_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1506-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1506-2016_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1506-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.