YY/T 1400-2016 English PDF

US$264.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1400-2016: Dentistry--Materials used for dental equipment surfaces--Determination of resistance to chemical disinfectants
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1400-2016	264	Add to Cart	3 days	Dentistry--Materials used for dental equipment surfaces--Determination of resistance to chemical disinfectants	Valid

Similar standards

YY/T 1691   YY/T 1692   YY/T 1702   YY/T 1284   YY/T 1401   

Basic data

Standard ID: YY/T 1400-2016 (YY/T1400-2016)
Description (Translated English): Dentistry--Materials used for dental equipment surfaces--Determination of resistance to chemical disinfectants
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C33
Classification of International Standard: 11.060.20
Word Count Estimation: 14,110
Date of Issue: 2016-03-23
Date of Implementation: 2017-01-01
Regulation (derived from): Notice of the General Administration of Food and Drug Administration (No. 74 of 2016)
Issuing agency(ies): State Food and Drug Administration

YY/T 1400-2016: Dentistry--Materials used for dental equipment surfaces--Determination of resistance to chemical disinfectants

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants ICS 11.060.20 C33 People's Republic of China Pharmaceutical Industry Standard Dental Dental Equipment Surface Materials Resistance to chemical disinfectants (ISO 21530..2004, IDT) 2016-03-23 release 2017-01-01 Implementation State Food and Drug Administration issued Directory Preface I Introduction II 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 Sampling 1 5 Test Method 2 Guidelines for Examination and Evaluation 7 Test Report 8 Appendix A (informative) Chemical Disinfectant Solution Overview 9 Reference 10

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard uses the translation method equivalent to ISO 21530..2004 "dental dental equipment surface materials resistant to chemical disinfectant Set "(English version). And the normative references cited in this document cited in the international documents have a consistent correspondence between the following documents. GB/T 6682 Analytical laboratory water specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD) --- GB/T 9937 (all parts) Oral vocabulary [ISO 1942 (all parts)] Properties of HG/T 3115 Borosilicate Glass 3.3 (HG/T 3115-1998, ISO 3585..1991, IDT) This standard has made the following editorial changes. - Some edits have been made in accordance with the requirements of GB/T 1.1; - Explain the preamble of international standards. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This standard is proposed by the State Food and Drug Administration. This standard by the National Dermatology and Equipment Equipment Standardization Technical Committee of Dental Equipment and Instruments Subcommittee (SAC/TC99 / SC1). The drafting of this standard. the State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center, Shandong Xinhua Medical Devices Limited company. The main drafters of this standard. Li Shining, Liu Xiaolin, Zhou Yuxin.

Introduction

All materials used on the exterior and touchable surfaces of dental equipment are subject to aerosols, splashes and droplets during normal use. Pollution. When disinfected with the relevant disinfectant recommended by the dental equipment manufacturer, these materials should be able to withstand this disinfection without Degenerate or discolored. Dental Dental Equipment Surface Materials Resistance to chemical disinfectants

1 Scope

This standard specifies three test methods for determining the characteristics of chemical disinfectants that are expected to require disinfection of the external surface of dental equipment. Soaking test, spray test, contact test. The choice of which test method to use is determined by the experimenter. This standard does not address the effectiveness of disinfectants in bacteria, viruses and fungi. This standard does not specify the test material in the resistance reagent test, the stress on the determination of the possible impact.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 554 standard and atmospheric pressure specifications for regulation and/or testing (Standardatmospheresforconditioning and/ortes- ting-specifications ISO 1942 Dentistry-Vocabulary ISO 2812-1 Coatings and varnishes - Determination of resistance to liquids - Part 1. Liquid penetrants other than water (Paintsand varnishes-Determination ofresistancetoliquids-Part 1. Immersioninliquidsotherthanwater) ISO 3585 3.3 Borosilicate Glass Properties (Borosilicateglass3.3-Properties) ISO 3696. 1987 Analysis of laboratory water specifications and test methods (Waterforanalyticallaboratoryuse-Specifica- tionandtestmethods)

3 terms and definitions

The terms and definitions defined in ISO 1942 apply to this document.

4 Sampling

All tests described in this standard are type tests. As far as possible from the dental equipment on behalf of the representative of the sample, a complete test. The sample is as flat as possible. The following sampling side Choose one of the law. a) the use of new parts of dental equipment; b) If a) it is not possible to use standard samples and samples made from semi-finished products (eg thick plates, sheets or balls); c) Specimens may also be made by cutting (eg, cutting or sawing) unprocessed parts or semi-finished products, but requiring new edges and new surfaces of the specimen to be The original surface of the same nature. On the new edge and the new surface of the area formed should be protected, the new area should account for the sample area A smaller proportion. All samples should be free of dirt and grease. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1400-2016_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1400-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1400-2016_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1400-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.