YY/T 1227-2014 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1227-2014: In vitro diagnostic reagent(kit)nomenclature for clinical chemistry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1227-2014	459	Add to Cart	4 days	In vitro diagnostic reagent(kit)nomenclature for clinical chemistry	Valid

Similar standards

YY/T 1232   YY/T 1231   YY/T 1221   YY/T 1233   YY/T 1226   YY/T 1222   

Basic data

Standard ID: YY/T 1227-2014 (YY/T1227-2014)
Description (Translated English): In vitro diagnostic reagent(kit)nomenclature for clinical chemistry
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C44
Classification of International Standard: 11.100
Word Count Estimation: 20,238
Date of Issue: 6/17/2014
Date of Implementation: 7/1/2015
Quoted Standard: ISO 18113.1-2009
Regulation (derived from): China Food and Drug Administration in 2014 Bulletin No. 30
Issuing agency(ies): State Food and Drug Administration
Summary: This Standard applies to the use of spectrophotometry using automatic biochemical analyzer, semi-automatic biochemical analyzer or spectrophotometer, medical laboratory for quantitative detection of clinical chemistry in vitro diagnostic reagents (box) pr

YY/T 1227-2014: In vitro diagnostic reagent(kit)nomenclature for clinical chemistry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
In vitro diagnostic reagent (kit) nomenclature for clinical chemistry ICS 11.100 C44 People's Republic of China pharmaceutical industry standards Clinical chemistry in vitro diagnostic reagents (box) named Issued on. 2014-06-17 2015-07-01 implementation China Food and Drug Administration released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents. This standard was proposed by the China Food and Drug Administration. This standard by the national medical clinical laboratory testing and in vitro diagnostic systems for Standardization Technical Committee (SAC/TC136) centralized. This standard was drafted. Beijing Drug Administration Medical Device Evaluation Center, Beijing Medical Device Testing. The main drafters of this standard. Zhao, Bi Chunlei, Zhang, He Xueying.

Introduction

This standard is based on a lot of research carried out on the basis of the State Food and Drug Administration issued the "in vitro diagnostic reagents Registry After (Trial) "(SFDA [2007] No. 229), repeatedly seek expert advice in clinical, manufacturing, regulatory and other aspects of development. needle For the spectrophotometric principle, the use of automatic biochemical analyzer, spectrophotometer or semi-automatic biochemical analyzer, medical laboratory In vitro diagnostic reagents clinical chemistry project quantitative test used (box). The purpose of this is to develop standards of in vitro diagnostic reagents product names provide a reference for manufacturers, for regulators regulate markets Basis, in order to standardize in vitro diagnostic reagents product name to facilitate clinical use. Clinical chemistry in vitro diagnostic reagents (box) named

1 Scope

This standard specifies the principles of clinical chemistry in vitro diagnostic kit named to be followed, and part of the project to develop a specific named instance. This standard contains the scope, normative references, terms and definitions and requirements and so on. This standard applies to the use of spectrophotometry using automatic biochemical analyzer, spectrophotometer or semi-automatic biochemical analyzer, medical Laboratory for quantitative detection of clinical chemistry in vitro diagnostic reagents (box) products. This standard does not apply to calibration, controls.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 18113-1.2009 In vitro diagnostic medical device manufacturers to provide information (labeling) - Part 1. Terms, definitions and general Requirements (Invitrodiagnosticmedicaldevices-Informationsuppliedbythemanufacturer (labeling) - Part 1. Terms, definitionsandgeneralrequirements)

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 IVD invitrodiagnosticreagent It intended by the manufacturer to be used for in vitro diagnostic medical devices for chemical, biological or immunological components, solutions or preparation. [ISO 18113-1.2009, definitions 3.28] 3.2 Clinical chemistry in vitro diagnostic reagents (box) Invitrodiagnosticreagent (kit) forclinicalchemistry On automatic biochemical analyzer, semi-automatic biochemical analyzer or spectrophotometer chemical detection of human body fluids and life related activities Quality, to provide clinical diagnosis, treatment, diagnostic kits observe the condition, health assessment and other information. 3.3 Analyte (analyte) analyte measured Component having a measurable property of the sample. Example. In the "plasma glucose concentration of the substance", the "glucose" analyte "concentration" feature. [Adapted from GB/T 21415-2008/ISO 17511.2003, 3.2 Definition] 3.4 Intended use intendeduse In vitro diagnostic manufacturers specifications, instructions for use and in vitro diagnostic manufacturers to provide information about the given product, process or service Operational objectives intended to be used for. [ISO 18113-1.2009, definitions 3.31] Note. in vitro diagnostic label may include a description of the intended use of two parts, the description of the function in vitro diagnostic medical devices (for example, a serum or ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1227-2014_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1227-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1227-2014_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1227-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.