YY/T 1207-2013 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1207-2013: Uric acid assay kit (Uricase-PAP method)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 1207-2013	189	Add to Cart	3 days	Uric acid assay kit (Uricase-PAP method)	Valid

Similar standards

YY/T 1200   YY/T 1213   YY/T 1206   YY/T 1199   YY/T 1204   

Basic data

Standard ID: YY/T 1207-2013 (YY/T1207-2013)
Description (Translated English): Uric acid assay kit (Uricase-PAP method)
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C44
Classification of International Standard: 11.100
Word Count Estimation: 8,827
Quoted Standard: YY/T 0466.1
Regulation (derived from): State Food and Drug Administration Notice No. 36 of 2013; industry standard for filing Notice 2013 No. 12 (No. 168 overall)
Issuing agency(ies): State Food and Drug Administration
Summary: This standard specifies: uric acid assay kit (peroxidase-conjugated uricase method) requirements, test methods, marking, labeling and instructions for use, packaging, transportation and storage. This standard applies to: uric acid assay kit (peroxidase-co

YY/T 1207-2013: Uric acid assay kit (Uricase-PAP method)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Uric acid assay kit (Uricase-PAP method) ICS 11.100 C44 People's Republic of China pharmaceutical industry standards Uric acid assay kit (Uricase peroxidase conjugated method) Issued on. 2013-10-21 2014-10-01 implementation China Food and Drug Administration released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this standard may involve patents. The standard release mechanism does not assume the responsibility to identify these patents. This standard was proposed by the China Food and Drug Administration. This standard by the national medical clinical laboratory testing and in vitro diagnostic systems for Standardization Technical Committee (SAC/TC136) centralized. This standard drafting unit. China Academy of Food and Drug test. The main drafters of this standard. Liu Yan, Sun Nan, Wang Yumei, Zhangchun Tao, noble first. Uric acid assay kit (Uricase peroxidase conjugated method)

1 Scope

This standard specifies the uric acid assay kit (uricase peroxidase conjugated Act) requirements, test methods, marking, labeling and use of said Specification, packaging, transportation and storage. This standard applies to uric acid assay kit (uricase peroxidase conjugated method) quality control.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Symbols - Part 1 YY/T 0466.1 medical equipment used with medical device labels, labeling and information. General requirements

3 Requirements

3.1 Appearance Compatible with the manufacturer's appearance requirements. 3.2 PACKING Liquid reagent loading amount not less than the labeled amount. 3.3 reagent blank absorbance At 500nm ~ 550nm wavelength, dual reagent blank absorbance of uric acid assay kit should be less than 0.200, a single measurement of uric acid reagent Blank absorbance given the kit should be less than 0.300. 3.4 Linear Interval Within the linear range specified by the manufacturer, and the theoretical concentration measured concentrations of the linear correlation coefficient (r) shall not be less than 0.9900. 3.5 Accuracy Use standard product has traceability was measured relative deviation of the measured value and the value declared shall be within ± 10.0%. 3.6 Sensitivity Analysis When test kits given concentration of analyte, change in absorbance (ΔA) shall comply with the manufacturer's given range. 3.7 Precision 3.7.1 within run precision Intra-assay precision should be less than 4.0%. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 1207-2013_English be delivered?

Answer: Upon your order, we will start to translate YY/T 1207-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 1207-2013_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 1207-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.