YY/T 0833-2020 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 0833-2020: General technical requirements for compression physiotherapy equipment for limbs
Status: Valid

YY/T 0833: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 0833-2020	189	Add to Cart	3 days	General technical requirements for compression physiotherapy equipment for limbs	Valid
YY/T 0833-2020	189	Add to Cart	3 days	General technical requirements for compression physiotherapy equipment for limbs	Valid
YY 0833-2011	399	Add to Cart	3 days	Compression physiotherapy equipment for limbs	Obsolete

Similar standards

YY 0778   YY 0950   YY 0903   YY 0838   YY 0839   

Basic data

Standard ID: YY/T 0833-2020 (YY/T0833-2020)
Description (Translated English): General technical requirements for compression physiotherapy equipment for limbs
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C42
Classification of International Standard: 11.040.60
Word Count Estimation: 10,144
Date of Issue: 2020-02-21
Date of Implementation: 2022-01-01
Issuing agency(ies): State Drug Administration
Summary: This standard specifies the terms and definitions, classification and composition, requirements, and test methods of limb compression physiotherapy equipment (hereinafter referred to as equipment). This standard applies to electrical equipment that places a pressurized chamber around the limbs, applies positive pressure to the limbs according to a certain treatment procedure, and performs physical therapy on patients through changing air pressure. This standard does not apply to the following equipment: hemostatic equipment; anti-decubitus air cushion; shock wave therapy equipment; cupping device; air bag type external counterpulsation device; ballistic external pressure wave therapy equipment; training equipment for ischemic preconditioning; first aid equipment.

YY/T 0833-2020: General technical requirements for compression physiotherapy equipment for limbs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 11:040:60 C42 Pharmaceutical Industry Standard of the People's Republic of China YY 0833-2020 Replace YY 0833-2011 General technical requirements for limb compression physiotherapy equipment equipment for limbs According to the State Drug Administration medical device industry Standard Announcement (No: 76 of 2022), this standard is from From September 7, 2022, it will be converted into a recommended standard, no Enforce it again: Released on 2020-02-21 Implemented on 2022-01-01 Released by the State Drug Administration

foreword

All technical contents of this standard are mandatory: This standard is drafted in accordance with the rules given in GB/T 1:1-2009: This standard replaces YY 0833-2011 "Extremity Compression Physiotherapy Equipment": Compared with YY 0833-2011, except for editorial modifications, the main The technical changes are as follows: --- Increased the definition of treatment pressure, pressure pulse width, output pressure (see Chapter 3); --- Added requirements for treatment procedures and test methods (see 5:1, 6:1); --- Modified the requirements and test methods for treatment pressure (see 5:2, 6:2, 5:3, 5:4, 5:5, 6:3, 6:4, 6:5 of the:2011 edition); --- Modified the requirements and test methods for overvoltage protection (see 5:3, 6:3, 5:6, 6:6 of the:2011 edition); --- Modified the requirements and test methods of the functional switch (see 5:4, 6:4, 5:8, 6:8 of the:2011 edition); --- Modified the requirements and test methods for pressure relief measures (see 5:5, 6:5, 5:9, 6:9 of the:2011 edition); --- Increased the requirements and test methods for fault prompts (see 5:6, 6:6); --- Modified the requirements and test methods for working noise (see 5:7, 6:7, 5:15, 6:15 of the:2011 edition); --- Modified the requirements and test methods for appearance and structure (see 5:8:1, 6:8:1, 5:2, 6:2 of the:2011 edition); ---Modified the requirements and test methods for pressure resistance (see 5:8:2, 6:8:2, 5:11, 6:11 of the:2011 edition); --- Modify the fatigue performance requirements and test methods (see 5:8:3, 6:8:3, 5:12, 6:12 of the:2011 edition); --- Modify the connection requirements (see 5:9, 5:14 of the:2011 edition); --- Increased electromagnetic compatibility requirements and test methods (see 5:11, 6:11); ---Deleted the requirements and test methods for timing devices (see 5:7, 6:7 of the:2011 edition); ---Deleted the airtightness requirements and test methods (see 5:10, 6:10 of the:2011 edition): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying these patents: This standard was proposed by the State Drug Administration: This standard is under the jurisdiction of the Physical Therapy Equipment Sub-Technical Committee (SAC/TC10/SC4) of the National Medical Electrical Appliances Standardization Technical Committee: This standard was drafted by: Tianjin Medical Device Quality Supervision and Inspection Center, Chongqing Medical Device Quality Inspection Center, Sichuan Qianli Beiyi Kang Medical Technology Co:, Ltd:, Kangdis (Shanghai) Medical Devices Co:, Ltd: The main drafters of this standard: Gao Shan, Zhang Yun, Liu Bo, Zhou Ping, Jiang Yu, Wang Zhifang, Zhang Wen: The previous releases of the standards replaced by this standard are as follows: ---YY 0833-2011: YY 0833-2020 General technical requirements for limb compression physiotherapy equipment

1 Scope

This standard specifies the terms and definitions, classification and composition, requirements and test methods of limb compression physiotherapy equipment (hereinafter referred to as equipment): This standard is applicable to putting the pressurized cavity around the limbs, applying positive pressure to the limbs according to a certain treatment procedure, and treating the patient with the changed air pressure: Electrical equipment for physical therapy: This standard does not apply to the following equipment: ---Hemostasis equipment; ---Anti-decubitus air cushion; ---Shock wave therapy equipment; --- Cupping device; --- Air bag type external counterpulsation device; ---Ballistic extracorporeal pressure wave therapy equipment; --- Training equipment for ischemic preconditioning; --- First aid equipment:

2 Normative references

The following documents are indispensable for the application of this document: For dated references, only the dated version applies to this document pieces: For undated references, the latest version (including all amendments) applies to this document: GB 9706:1 Medical Electrical Equipment Part 1: General Safety Requirements GB/T 14710 Environmental requirements and test methods for medical electrical appliances GB/T 16886:1 Biological evaluation of medical devices Part 1: Evaluation and testing YY 0505 Medical Electrical Equipment Part 1-2: General Safety Requirements Collateral Standard: Electromagnetic Compatibility Requirements and Tests

3 Terms and Definitions

The following terms and definitions defined in GB 9706:1 apply to this document: 3:1 Put the pressurized cavity around the limb, apply positive pressure to the limb according to a certain treatment procedure, and perform physical therapy on the patient through the changing air pressure: medical electrical equipment: 3:2 therapeutic sequence It consists of parameters such as pressurization chamber type, pressurization sequence, treatment pressure, pressure holding time, intermittent time (if applicable), total treatment time, etc: A complete output program that can be run automatically: 3:3 therapeutic pressure In a specific treatment procedure, the target pressure expected to be delivered to the surface of the limb usually refers to the pressure that can be maintained for more than 1 second in a pressure maintenance phase: YY 0833-2020 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 0833-2020_English be delivered?

Answer: Upon your order, we will start to translate YY/T 0833-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 0833-2020_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 0833-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YY/T 0833-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0833-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.