YY/T 0756-2009 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 0756-2009: Optics and optical instruments - Lasers and laser-related equipment laser beam power (energy density distribution of the test method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YY/T 0756-2009	399	Add to Cart	4 days	Optics and optical instruments - Lasers and laser-related equipment laser beam power (energy density distribution of the test method	Valid

Similar standards

YY 0789   YY/T 0767   YY 0844   YY/T 0750   YY/T 0749   YY/T 0748.1   

Basic data

Standard ID: YY/T 0756-2009 (YY/T0756-2009)
Description (Translated English): Optics and optical instruments - Lasers and laser-related equipment laser beam power (energy density distribution of the test method
Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended)
Classification of Chinese Standard: C41
Word Count Estimation: 16,112
Date of Issue: 2009-12-30
Date of Implementation: 2011-06-01
Issuing agency(ies): State Food and Drug Administration

YY/T 0756-2009: Optics and optical instruments - Lasers and laser-related equipment laser beam power (energy density distribution of the test method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Optics and optical instruments-Lasers and laser-related equipment laser beam power (energy density distribution of the test method ICS 11.040 C41 People's Republic of China Pharmaceutical Industry Standard Optical and optical instrument laser and laser related equipment Test method of laser beam power (energy) density distribution Released on.2009-12-30 2011-06-01 implementation Issued by the State Food and Drug Administration

Table of contents

Preface Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 3.1 Measuring volume 1 3.2 Characteristic parameters 2 3.3 Distribution fitting 5 4 Coordinate system 5 5 Characteristic parameters derived from the measured spatial distribution 5 6 Distribution fitting 6 7 Test Principle 6 8 Measuring arrangement and test equipment 7 8.1 Overview 7 8.2 Preparation 7 8.3 Environmental control 7 8.4 Detector system 7 8.5 Beam shaping optics, optical attenuators and beam splitters 8 9 Test procedure 8 9.1 Equipment preparation 8 9.2 Detector calibration procedure 8 9.3 Data recording and noise correction 9 10 Evaluation 10 10.1 Selection and optimization of integral limits 10 10.2 Control and optimize background correction 10 11 Test report 10

Foreword

This standard is equivalent to ISO 13694.2000 "Optical and optical instrument laser and laser related equipment laser beam power (energy) Test Method for Density Distribution" and Technical Corrigendum Cor1.2005 (English version). Many applications of lasers involve the use of near-field and far-field power (energy) density distributions of laser beams. The power of the laser beam (energy The characteristic of the density distribution is the spatial distribution of the irradiation power (energy), and it is the lateral distribution of a specific plane perpendicular to the direction of propagation. Generally, the power (energy) density distribution of the laser beam changes with the propagation direction. This standard was proposed by the State Food and Drug Administration. This standard is under the jurisdiction of the National Standardization Sub-Technical Committee of Medical Optics and Instruments (SAC/TC103/SC1). This standard was drafted. Hangzhou Medical Device Quality Supervision and Inspection Center of the State Food and Drug Administration. The main drafters of this standard. Huang Dan, Sun Yu, Ye Yueshun, Han Jiancheng. Optical and optical instrument laser and laser related equipment Test method of laser beam power (energy) density distribution

1 Scope

This standard specifies the method for measuring the power (energy) density distribution and defines the laser power (energy) density distribution function on a given plane Number of characteristic parameters. The methods specified in this standard are suitable for detecting and describing the characteristics of continuous laser and pulsed laser beams used in optical and optical instruments.

2 Normative references

The clauses in the following documents constitute the clauses of this standard through reference in this article. For dated reference documents, all subsequent The amendments (not including errata content) or revisions do not apply to this standard. However, all parties that have reached an agreement based on this standard are encouraged to study Is the latest version of these files available? For undated reference documents, the latest version applies to this standard. GB/T 15313-2008 Laser Terminology (MOD, ISO 11145.2006) JB/T 6860-1993 Detectors, instruments and equipment for measuring laser radiation power energy (MOD, IEC 1040.1990) ISO 11146.1999 Lasers and laser-related equipment-Test methods for laser beam parameters-Beam width, divergence angle and beam propagation factor ISO 11554.1998 Optics and optical instruments-Lasers and laser-related equipment-Test methods for laser beam power, energy and temporal and spatial characteristics

3 Terms and definitions

The following terms and definitions defined in GB/T 15313-2008 and JB/T 6860-1993 apply to this document. 3.1 Measurement volume 3.1.1 Power density E(x,y,z) The power of the beam projected on the δA area of (x,y) at position z is divided by the area δA. 3.1.2 Energy Density H(x,y,z) < Pulse laser beam> The beam energy (integration of power versus time) projected on the δA area of (x, y) at position z divided by the area. 3.1.3 power P(z) The power of the continuous beam (cw) of the beam at position z. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YY/T 0756-2009_English be delivered?

Answer: Upon your order, we will start to translate YY/T 0756-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YY/T 0756-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YY/T 0756-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.