YY/T 0725-2009 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY/T 0725-2009: Dental equipment. Connections for supply and waste lines Status: Obsolete
Basic dataStandard ID: YY/T 0725-2009 (YY/T0725-2009)Description (Translated English): Dental equipment. Connections for supply and waste lines Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended) Classification of Chinese Standard: C33 Classification of International Standard: 11.060.20 Word Count Estimation: 6,669 Date of Issue: 2009-06-16 Date of Implementation: 2010-12-01 Quoted Standard: GB/T 9937.4-2005 Adopted Standard: ISO 11144-1995, IDT Regulation (derived from): Industry standard filing Notice 2009 No. 9 Issuing agency(ies): State Food and Drug Administration Summary: This standard specifies the dental equipment, dental treatment machines, equipment and devices used to connect to the exhaust pipe layout requirements, including building between interconnected piping and piping requirements. This standard also provides the water, wastewater, and attract (vacuum) supply lines for the relative position of the center and the minimum size, and service facilities for dental air line circuit and adjacent areas of a specified size. Requirements of this standard apply to all types of dental treatment machines and dental treatment centers. YY/T 0725-2009: Dental equipment. Connections for supply and waste lines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dental equipment.Connections for supply and waste lines ICS 11.060.20 C33 People's Republic of China pharmaceutical industry standards YY/T 0725-2009/ISO 11144.1995 Dental equipment is connected to the exhaust pipe (ISO 11144.1995, IDT) Posted 2009-06-16 2010-12-01 implementation State Food and Drug Administration issued ForewordAll aspects of this standard are recommended. This standard is identical with ISO 11144.1995 "dental equipment supply and discharge pipe connection." This standard was proposed by the State Food and Drug Administration. This standard material by the National Standardization Technical Committee appliances and equipment and dental equipment and oral equipment at the Technical Committee. This standard was drafted. State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center, Ningbo has a blue field of medical devices Limited. The main drafters of this standard. Li Danrong, Huang new, lean Wu Ming Xu Buguang. YY/T 0725-2009/ISO 11144.1995IntroductionIn the dental unit with a treatment center, people continue to improve its design and equipment configurations to meet the requirements of modern dentistry. different Treatment machine manufacturer and model, its connection size and relative position of the facility are also different. Equipment selection, especially in large installations of equipment selection, in order to determine the layout of the pipeline may have to be good at an early stage of construction The building was not in accordance with the appropriate equipment needed to choose. When after installing a replacement device, often to transform the main line. By Facilities layout standardization, to avoid the appearance of these difficulties, and to ensure that the pipeline contractor for proper facility requirements. This standard is not intended to specify equipment should be within the scope of the use of dental surgeries, but the mutual position of the device will make provision. YY/T 0725-2009/ISO 11144.1995 Dental equipment is connected to the exhaust pipe1 ScopeThis standard specifies the dental equipment, dental unit, instruments and devices used to connect the discharge pipe layout requirements, including constructing the pipeline And inter-line interconnection requirements. This standard also provides water, wastewater, and the relative position attracted (vacuum) supply line applies, in Heart and minimum size, and the size of the circuit and the compressed air line for dental services and facilities near the designated area. Requirements of this standard apply to dental unit and dental treatment centers require all kinds.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9937.4-2005 Dental Terminology - Part 4. Dental equipment (ISO 1942-4.1999, IDT)3 Terms and definitionsGB/T 9937.4 and established the following terms and definitions apply to this standard. 3.1 Appurtenances dental composition function items, such as the dental unit, dental patient chairs and dental equipment and instruments interconnected Composition, treatment can provide a functional environment for dental care.4 Requirements4.1 connection configuration should meet the requirements of Figure 1. Given circuit, compressed air connection area size, maximum. Aperture given minimum. Which provides free space size diameter pipes and hoses requirements. No required size hole can be placed anywhere within the region in connection. If there are other requirements for gas pipe, the gas pipe should not be placed in a predetermined region of FIG. This standard does not specify the joint position that has other uses, the manufacturer shall make provision. 4.2 dimensions specified in Figure 1, you should use a suitable measuring device to measure general. YY/T 0725-2009/ISO 11144.1995 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 0725-2009_English be delivered?Answer: Upon your order, we will start to translate YY/T 0725-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY/T 0725-2009_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0725-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
