YY/T 0630-2008 English PDFUS$399.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY/T 0630-2008: Dentistry. Dental units. Part 2: Water and air supply Status: Obsolete
Basic dataStandard ID: YY/T 0630-2008 (YY/T0630-2008)Description (Translated English): Dentistry. Dental units. Part 2: Water and air supply Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended) Classification of Chinese Standard: C33 Classification of International Standard: 11.060.20 Word Count Estimation: 10,114 Date of Issue: 2008-04-25 Date of Implementation: 2009-06-01 Quoted Standard: YY/T 1043-2004; ISO 11144 Adopted Standard: ISO 7494-2-2003, IDT Regulation (derived from): SFDA [2008] No. 192 Issuing agency(ies): State Food and Drug Administration Summary: This standard specifies the dental unit water supply and gas supply system of the material, the design and construction requirements and test methods to ensure that the dental unit water supply source gas quality standards, including the prevention of oral liquid back to breathe Dental Unit the provisions of the water supply. This standard to prevent dangerous microorganisms (such as bacteria, viruses, etc.) pollution and (or) diffusion is not specified. YY/T 0630-2008: Dentistry. Dental units. Part 2: Water and air supply---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dentistry.Dental units.Part 2. Water and air supply ICS 11.060.20 C33 People's Republic of China pharmaceutical industry standards YY/T 0630-2008/ISO 7494-2.2003 Dentistry Dental treatment machine Part 2. Water and gas (ISO 7494-2.2003, IDT) Posted 2008-04-25 2009-06-01 implementation State Food and Drug Administration issued ForewordAll aspects of this standard are recommended. This standard is identical with ISO 7494-2.2003 "Dentistry Dental treatment machines - Part 2. Water and gas." This standard was proposed by the State Food and Drug Administration. This standard by the National Dental Materials and Devices Equipment Standardization Technical Committee sub focal point focal point. This standard was drafted. State Food and Drug Administration Guangzhou Medical Device Quality Supervision and Inspection Center. The main drafters of this standard. Li Danrong, leaning Wu Ming publicity. This standard by the National Standardization Technical Committee of Dental Materials and Devices and equipment responsible for the interpretation. YY/T 0630-2008/ISO 7494-2.2003IntroductionRequirements dental unit water and gas supply systems, technology has been in the International Organization for Standardization Technical Committee dental dental equipment sixty minutes Operation Committee Working Group II discussed in detail. Technical specifications of the dental unit water and gas path that also made full Ming, but did not ask questions about the microbial aspects. In order to avoid or reduce biofilm on the road surface water and gas, an accurate statement of the standard it is quite difficult. As the current technology of water Ping can not provide a comprehensive solution, it could not reach a consensus. Thus, the International Organization for Standardization agreed first "water gas road General technical requirements "as an International Standard. The next step will begin to find ways to solve the problems of microorganisms, including control or go In addition to the technical evaluation of the dental unit water biofilms. YY/T 0630-2008/ISO 7494-2.2003 Dentistry Dental treatment machine Part 2. Water and gas1 ScopeThis standard specifies the requirements and test methods for materials dental unit water and gas supply systems, design and construction, to ensure the supply of dental Quality and supply of water treatment machines and qualified, including the prevention of oral liquid sucked back dental unit water supplies provisions. The standard for preventing the risk of microbial contamination (such as bacteria, viruses, etc.), and (or) diffusion is not specified.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. YY/T 1043-2004 dental unit (ISO 7494.1996, IDT) 11144 dental equipment connected to supply and discharge pipelines ISO3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 By the dental unit supplied water used in the oral cavity. Example. Mobile cooling water, water gun, scaler cooling water or mouthwash. 3.2 Supplied by the dental unit, the water used is not within the oral cavity. Example. spittoon flushing water supplied to the venturi or water. 3.3 Water supply dental uses for treated water or treated water. 3.4 To improve or maintain the quality of treated water, or other purposes, and designated by the manufacturer, with the input water mix or use a separate Solution. Note. Other objects can be cut drill coolant, the oral drugs. 3.5 In storage-based, providing a solution of water or the processing system. It is with the water supply system are separated. 3.6 Output from the dental unit water. YY/T 0630-2008/ISO 7494-2.2003 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 0630-2008_English be delivered?Answer: Upon your order, we will start to translate YY/T 0630-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY/T 0630-2008_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0630-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
