YY/T 0113-2015 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY/T 0113-2015: Dentistry - Test method for the wear resistant of dental composite resin Status: Valid YY/T 0113: Historical versions
Basic dataStandard ID: YY/T 0113-2015 (YY/T0113-2015)Description (Translated English): Dentistry - Test method for the wear resistant of dental composite resin Sector / Industry: Medical Device & Pharmaceutical Industry Standard (Recommended) Classification of Chinese Standard: C33 Classification of International Standard: 11.060.10 Word Count Estimation: 8,884 Date of Issue: 2015-03-02 Date of Implementation: 2016-01-01 Older Standard (superseded by this standard): YY/T 0113-1993 Quoted Standard: GB/T 4472; YB/T 5217-2005 Regulation (derived from): The State Food and Drug Administration Announcement 2015 No. 8 Issuing agency(ies): State Food and Drug Administration Summary: This Standard specifies the test methods of dental composite resin abrasion resistance. This Standard applies to light-curing and chemical curing of dental composite resin abrasion resistance test. YY/T 0113-2015: Dentistry - Test method for the wear resistant of dental composite resin---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Dentistry - Test method for the wear resistant of dental composite resin ICS 11.060.10 C33 People's Republic of China Pharmaceutical Industry Standard Replacing YY/T 0113-1993 Test method for abrasion resistance of dental composite resin 2015-03-02 release 2016-01-01 Implementation State Food and Drug Administration issued ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is YY/T 0113-1993 "dental composite resin wear resistance test method" revision. This standard is replaced Standard Test Method for Wear Resistance of Dental Composite Resin YY/T 0113-1993. The main technical changes of this standard and YY/T 0113-1993 "Test method for wear resistance of dental composite resin" are as follows. - increases the main motion parameters of the wear test device. --- Increased wear resistance by means of measuring the height of the specimen. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This standard is proposed by the State Food and Drug Administration. This standard is nationalized by the National Standardization Technical Committee for Dental Materials and Equipment (SAC/TC99). The main drafting of this standard. the State Food and Drug Administration Peking University Medical Device Quality Supervision and Inspection Center. The main drafters of this standard. Zheng Gang, Han Jianmin, Lin Hong, Zhang Yan. This standard was first published in February.1993. Test method for abrasion resistance of dental composite resin1 ScopeThis standard specifies the test method for the wear resistance of dental composite resins. This standard applies to the photocurable and chemically cured dental composite resin wear resistance test.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Chemical products - Determination of density and relative density GB/T 4472 YB/T 5217-20053 terms and definitionsThe following terms and definitions apply to this document. 3.1 Sample sample The sample to be tested with the test material. 3.2 Wear load The positive pressure on the specimen when it is worn. 3.3 Fixture A device for holding a specimen in a wear test. 3.4 Specimen exposed length exposedlengthofsamples The sample mounted on the jig exposes the length of the jig portion. 3.5 On the mill Wear parts of the mill with wear. 3.6 Abrasive abrasive The material is squeezed between the specimen and the mill. 3.7 Pre-grinding In order to make the ground surface of the sample have a consistent initial form, the formal test carried out before the wear process. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 0113-2015_English be delivered?Answer: Upon your order, we will start to translate YY/T 0113-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY/T 0113-2015_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 0113-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YY/T 0113-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY/T 0113-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
