YY 0286.1-2019 PDF EnglishUS$199.00 · In stock · Download in 9 seconds
YY 0286.1-2019: Infusion sets for special purpose - Part 1: Infusion sets for single use with micropore filters Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid YY 0286.1: Historical versions
Similar standardsYY 0286.1-2019: Infusion sets for special purpose - Part 1: Infusion sets for single use with micropore filters---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YY0286.1-2019 Infusion sets for special purpose - Part 1. Infusion sets for single use with micropore filters ICS 11.040.20 C31 People's Republic of China Pharmaceutical Industry Standard Replacing YY 0286.1-2007 Special infusion set Part 1. Single-use microfiltration infusion set Infusionsetsforspecialpurpose- Part 1. Infusionsetsforsingleusewithmicroporefilters Published on.2019-05-31 2020-12-01 implementation State Drug Administration issued ForewordYY 0286 "Special Infusion Set" consists of the following parts. --- Part 1. Single-use microfiltration filtration infusion set; --- Part 2. Single-use burette infusion set, gravity infusion; --- Part 3. One-time use of light infusion sets; --- Part 4. Infusion sets for single use pressure infusion equipment; ---Part 5. Disposable bottle and bag infusion sets; --- Part 6. Single-use flow setting fine-tuning infusion set. This part is the first part of YY 0286. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section replaces YY 0286.1-2007. Compared with YY 0286.1-2007, the main technical changes except editorial changes are as follows. ---The standard name was changed from the "precision infusion set" to the current name, and the scope was expanded to the sterilization level; --- Increased the requirements for the sterilization grade liquid filter; --- Increased the requirement of a liquid filter with a nominal pore size of 1.2 μm; --- Increased venting requirements. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part is proposed by the State Drug Administration. This part is under the jurisdiction of the National Technical Committee for Standardization of Medical Infusion Devices (SAC/TC106). This section is mainly drafted by. Shandong Medical Device Product Quality Inspection Center, Wuhan Zhixun Chuangyuan Technology Development Co., Ltd. Shandong Xinhua Ande Medical Products Co., Ltd., Beijing Volt Technology Co., Ltd., Jiangxi Sanxin Medical Technology Co., Ltd., Shandong Wei Gao Group Medical Polymer Products Co., Ltd. The main drafters of this standard. Nie Jiaqi, Wu Qiyu, Li Songhua, Yang Jianxin, Liu Xiaohong, Li Weiyang, Wang Wenqing, Guo Wei, Luo Yong, Gao Na, Wang Yaqin. The previous versions of the standards replaced by this section are. ---YY 0286.1-2007.introductionWith the continuous development of infusion technology and the increasing clinical requirements, there have been some infusions that can be adapted to special clinical requirements. Device. It is not expected to include all infusion sets with special requirements in one standard. Therefore, the various parts of YY 0286 These dedicated infusion sets are only specified for a specific clinical requirement. Some special infusion sets may belong to a variety of special infusion sets, should At the same time, the part corresponding to YY 0286 is executed. The difference between the micro-filtered infusion set specified in this section of YY 0286 and the ordinary infusion set is that the former has a higher filtration performance. filter. Includes sterilizing grade liquid filter and micron level liquid filter. These infusion sets are suitable for clinical use of different drugs and Patients with high requirements for infusion quality. Special infusion set Part 1. Single-use microfiltration infusion set1 ScopeThis part of YY 0286 specifies the requirements for a single-use microfiltration filter infusion set (hereinafter referred to as an infusion set). This section applies to a nominal aperture of 0.22μm1 ), an infusion set of a 1.2 μm, 2.0 μm to 5.0 μm medical solution filter. 1) Also marked as 0.2μm.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 8368 Disposable Infusion Set Gravity Infusion YY/T 0918 liquid filtration membrane, liquid filtration filter method for bacterial retention3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Microporous filtration infusion set infusionsetswithmicroporefilters An infusion set with a medical fluid filter having a nominal pore size of 0.22 μm, 1.2 μm, and 2.0 μm to 5.0 μm. 3.2 Sterilization-grade liquid filter sterilizing-gradefilters A liquid filter with a nominal pore size of no more than 0.22 μm. 3.3 Micron grade filter micron-gradefilters A chemical liquid filter having a nominal pore size of 1.2 μm and 2.0 μm to 5.0 μm.4 General requirementsWith the general requirements of GB 8368 (except for the pore size of the liquid filter).5 tag example5.1 Infusion set The infusion set that meets the requirements of this part of YY 0286 and has a nominal liquid crystal filter with a pore size of 0.22 μm shall be described in the text of the text. The number, the letter IS, plus the letter F and the filter nominal aperture mark are as follows. Infusion set YY 0286.1-IS-F0.22 YY 0286.1-2019 Infusion sets for special purpose - Part 1. Infusion sets for single use with micropore filters ICS 11.040.20 C31 People's Republic of China Pharmaceutical Industry Standard Replacing YY 0286.1-2007 Special infusion set Part 1. Single-use microfiltration infusion set Infusionsetsforspecialpurpose- Part 1. Infusionsetsforsingleusewithmicroporefilters Published on.2019-05-31 2020-12-01 implementation State Drug Administration issuedForewordYY 0286 "Special Infusion Set" consists of the following parts. --- Part 1. Single-use microfiltration filtration infusion set; --- Part 2. Single-use burette infusion set, gravity infusion; --- Part 3. One-time use of light infusion sets; --- Part 4. Infusion sets for single use pressure infusion equipment; ---Part 5. Disposable bottle and bag infusion sets; --- Part 6. Single-use flow setting fine-tuning infusion set. This part is the first part of YY 0286. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This section replaces YY 0286.1-2007. Compared with YY 0286.1-2007, the main technical changes except editorial changes are as follows. ---The standard name was changed from the "precision infusion set" to the current name, and the scope was expanded to the sterilization level; --- Increased the requirements for the sterilization grade liquid filter; --- Increased the requirement of a liquid filter with a nominal pore size of 1.2 μm; --- Increased venting requirements. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This part is proposed by the State Drug Administration. This part is under the jurisdiction of the National Technical Committee for Standardization of Medical Infusion Devices (SAC/TC106). This section is mainly drafted by. Shandong Medical Device Product Quality Inspection Center, Wuhan Zhixun Chuangyuan Technology Development Co., Ltd. Shandong Xinhua Ande Medical Products Co., Ltd., Beijing Volt Technology Co., Ltd., Jiangxi Sanxin Medical Technology Co., Ltd., Shandong Wei Gao Group Medical Polymer Products Co., Ltd. The main drafters of this standard. Nie Jiaqi, Wu Qiyu, Li Songhua, Yang Jianxin, Liu Xiaohong, Li Weiyang, Wang Wenqing, Guo Wei, Luo Yong, Gao Na, Wang Yaqin. The previous versions of the standards replaced by this section are. ---YY 0286.1-2007.introductionWith the continuous development of infusion technology and the increasing clinical requirements, there have been some infusions that can be adapted to special clinical requirements. Device. It is not expected to include all infusion sets with special requirements in one standard. Therefore, the various parts of YY 0286 These dedicated infusion sets are only specified for a specific clinical requirement. Some special infusion sets may belong to a variety of special infusion sets, should At the same time, the part corresponding to YY 0286 is executed. The difference between the micro-filtered infusion set specified in this section of YY 0286 and the ordinary infusion set is that the former has a higher filtration performance. filter. Includes sterilizing grade liquid filter and micron level liquid filter. These infusion sets are suitable for clinical use of different drugs and Patients with high requirements for infusion quality. Special infusion set Part 1. Single-use microfiltration infusion set1 ScopeThis part of YY 0286 specifies the requirements for a single-use microfiltration filter infusion set (hereinafter referred to as an infusion set). This section applies to a nominal aperture of 0.22μm1 ), an infusion set of a 1.2 μm, 2.0 μm to 5.0 μm medical solution filter. 1) Also marked as 0.2μm.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB 8368 Disposable Infusion Set Gravity Infusion YY/T 0918 liquid filtration membrane, liquid filtration filter method for bacterial retention3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Microporous filtration infusion set infusionsetswithmicroporefilters An infusion set with a medical fluid filter having a nominal pore size of 0.22 μm, 1.2 μm, and 2.0 μm to 5.0 μm. 3.2 Sterilization-grade liquid filter sterilizing-gradefilters A liquid filter with a nominal pore size of no more than 0.22 μm. 3.3 Micron grade filter micron-gradefilters A chemical liquid filter having a nominal pore size of 1.2 μm and 2.0 μm to 5.0 μm.4 General requirementsWith the general requirements of GB 8368 (except for the pore size of the liquid filter).5 tag example5.1 Infusion set The infusion set that meets the requirements of this part of YY 0286 and has a nominal liquid crystal filter with a pore size of 0.22 μm shall be described in the text of the text. The number, the letter IS, plus the letter F and the filter nominal aperture mark are as follows. Infusion set YY 0286.1-IS-F0.22 ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YY 0286.1-2019 be delivered?Answer: The full copy PDF of English version of YY 0286.1-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YY 0286.1-2019_English with my colleagues?Answer: Yes. The purchased PDF of YY 0286.1-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YY 0286.1-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version YY 0286.1-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 0286.1-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of YY 0286.1-2019?A step-by-step guide to download PDF of YY 0286.1-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YY 0286.1-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
