YY 0117.3-2024 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY 0117.3-2024: Implants for surgery - Forgings, castings for bone joint prostheses - Part 3: Cobalt chromium molybdenum alloy castings Status: Valid YY 0117.3: Historical versions
Basic dataStandard ID: YY 0117.3-2024 (YY0117.3-2024)Description (Translated English): Implants for surgery - Forgings, castings for bone joint prostheses - Part 3: Cobalt chromium molybdenum alloy castings Sector / Industry: Medical Device & Pharmaceutical Industry Standard Classification of Chinese Standard: C35 Classification of International Standard: 11.040.40 Word Count Estimation: 10,122 Date of Issue: 2024-07-08 Date of Implementation: 2027-07-20 Older Standard (superseded by this standard): YY 0117.3-2005 Issuing agency(ies): State Drug Administration YY 0117.3-2024: Implants for surgery - Forgings, castings for bone joint prostheses - Part 3: Cobalt chromium molybdenum alloy castings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 11.040.40 CCSC35 Pharmaceutical Industry Standards of the People's Republic of China Replaces YY 0117.3-2005 Surgical implants, bone and joint prostheses, forgings and castings Part 3.Cobalt-chromium-molybdenum alloy castings Released on 2024-07-08 2027-07-20 Implementation The State Drug Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 3 of YY 0117 "Surgical Implants - Bone and Joint Prosthesis Forgings and Castings". YY 0117 has been issued as follows part. --- Part 1.Ti6Al4V titanium alloy forgings; --- Part 2.ZTi6Al4V titanium alloy castings; --- Part 3.Cobalt-chromium-molybdenum alloy castings. This document replaces YY 0117.3-2005 "Surgical Implants Bone and Joint Prosthesis Forgings and Castings Cobalt-Chromium-Molybdenum Alloy Castings" and Compared with YY 0117.3-2005, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Deleted the notes on the Rockwell hardness reference values in Table 2 (see Table 2 of the.2005 edition); --- Deleted the requirements for specific production process of castings (see 3.3 of the.2005 edition); --- Clarified the requirements for the mechanical properties of castings and adjusted the applicable conditions for cast specimens in the corresponding clauses (see 4.2,.2005 edition 3.4); --- Changed the surface quality requirements (see 4.3, 3.5 of the.2005 edition), added that there should be no discontinuity on the surface after grinding and repair welding Defective claims; --- Changed the batching requirements and deleted the process requirements for "vacuum conditions" (see 6.1, 5.1 of the.2005 edition); --- Changed the internal quality requirements. The allowable level of internal defects can meet the requirements of both the supplier and the buyer in accordance with Appendix A of YY/T 1565-2017 The limits of the recommended acceptable limits agreed upon in (see 4.4, 3.6 of the.2005 edition); --- Changed the test method for surface roughness. In addition to the sample comparison method, the test method of GB/T 10610 was added (see 5.3.2,.2005 4.5 of the year); --- Changed the test method for surface quality (see 5.3.3, 4.5 of the.2005 edition), added magnifying glass and fluorescent penetrant inspection methods. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by the State Food and Drug Administration. This document is under the jurisdiction of the National Technical Committee for Standardization of Surgical Implants and Orthopedic Devices (SAC/TC110). This document was drafted by. Beijing Youcai Jinghang Biotechnology Co., Ltd., Tianjin Medical Device Quality Supervision and Inspection Center, National Drug Administration Medical Device Technical Review Center of the State Food and Drug Administration, Greater Bay Area Center for Medical Device Technical Review and Inspection of the State Food and Drug Administration, Dabo Medical Medical Technology Co., Ltd. and Beijing Changhang Precision Casting Technology Co., Ltd. The main drafters of this document are. Xiong Zhenguo, Qin Geji, Li Qingchun, Li Yuan, Zhang Na, Zhang Jiazhen, Sun Jiayi, Li Zheng, Lu Minqi, Li Niya, Zeng Da, Liang Xiongwei, Xie Yongzhi, and Zhong Linzhao. The previous versions of this document and the documents it replaces are as follows. ---First issued in.1993 as YY 0177.3-1993, first revised in.2005; ---This is the second revision.IntroductionYY 0117 "Surgical Implant Bone and Joint Prosthesis Forgings and Castings" consists of 3 parts. --- Part 1.Ti6Al4V titanium alloy forgings; --- Part 2.ZTi6Al4V titanium alloy castings; --- Part 3.Cobalt-chromium-molybdenum alloy castings. Due to the different materials used to manufacture forgings and castings of bone and joint prostheses, the corresponding performance indicators and test methods are different. The series of standards are divided into three parts, which respectively regulate forgings and castings of bone and joint prostheses made of different materials. This revision is a summary of the original standards. and improvement, aiming to standardize the manufacturing and quality control of forgings and castings of bone and joint prostheses. Surgical implants, bone and joint prostheses, forgings and castings Part 3.Cobalt-chromium-molybdenum alloy castings1 ScopeThis document specifies the requirements, test methods, Inspection rules, quality certification, labeling, packaging, transportation and storage. This document applies to the production and acceptance of cobalt-chromium-molybdenum-gold castings for bone and joint prostheses.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 223 (all parts) Iron, steel and alloys GB/T 228.1 Tensile test of metallic materials Part 1.Room temperature test method GB/T 10610 Geometric Product Specification (GPS) Rules and methods for evaluating surface structure by surface structure profile method HB6573 Standard reference radiographs for investment steel castings HB20160 X-ray photography inspection YY/T 0343 Liquid Penetrant Testing of Surgical Metal Implants YY/T 1565-2017 Non-destructive testing of surgical implants - Radiographic testing of cast metal surgical implants3 Terms and definitionsThere are no terms or definitions that require definition in this document.4 Requirements4.1 Chemical composition Carry out the test according to the method described in 5.1.The chemical composition of the casting shall conform to the requirements of Table 1. Table 1 Chemical composition Elements C Cr Mo Ni Fe Mn Si Co Mass fraction/% ≤0.35 26.5~30.0 4.5~7.0 ≤1.0 ≤1.0 ≤1.0 ≤1.0 Matrix 4.2 Mechanical properties 4.2.1 Carry out the test according to the method described in 5.2.The mechanical properties of the casting shall meet the requirements of Table 2. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY 0117.3-2024_English be delivered?Answer: Upon your order, we will start to translate YY 0117.3-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY 0117.3-2024_English with my colleagues?Answer: Yes. The purchased PDF of YY 0117.3-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YY 0117.3-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 0117.3-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
