YY 0045-2013 English PDFUS$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YY 0045-2013: General maternity beds Status: Obsolete YY 0045: Historical versions
Basic dataStandard ID: YY 0045-2013 (YY0045-2013)Description (Translated English): General maternity beds Sector / Industry: Medical Device & Pharmaceutical Industry Standard Classification of Chinese Standard: C36 Classification of International Standard: 11.040.99 Word Count Estimation: 10,160 Older Standard (superseded by this standard): YY 0045-1991 Quoted Standard: GB/T 191; GB/T 2828.1; GB/T 9969 Regulation (derived from): State Food and Drug Administration announcement 2013 No. 36; industry standard for filing Notice 2013 No. 12 (No. 168 overall) Issuing agency(ies): State Food and Drug Administration Summary: This standard specifies: ordinary maternity beds (hereinafter referred to as bed capacity) Types and basic dimensions, requirements, test methods, inspection rules, signs, instructions, packaging, transportation and storage. This standard applies to: Ordi YY 0045-2013: General maternity beds---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.General maternity beds ICS 11.040.99 C36 People's Republic of China pharmaceutical industry standards Replacing YY 0045-1991 Ordinary bed capacity Issued on. 2013-10-21 2014-10-01 implementation China Food and Drug Administration released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces YY 0045-1991 "ordinary bed capacity." The main difference with the original standard YY 0045-1991 standard as follows. --- Modify the normative references listed in the standard list of documents; --- Remove the casters bed capacity requirements; --- Remove the "mechanical impurity diameter should ≤0.3mm" requirements; --- Modify the bed body force "100kg" is "135kg"; --- Increasing the batch test content substandard classification group of test items in order of importance are classified; --- Increasing the type test, determine the rules and the review criteria. Please note that some of the content of this standard may involve patents. The standard release mechanism does not assume the responsibility to identify these patents. This standard by the National Standardization Technical Committee of family planning devices and centralized. Drafting of this standard. National Food and Drug Administration Shanghai Medical Device Quality Supervision and Inspection Center, Zhejiang Medical Tait Instruments Limited. The main drafters of this standard. Yaotian Ping, Zhu Jianjun, Wengbing Hao, Xia Jiming. The standard standard replaces the previous editions. --- WS2-141-1982; --- YY 0045-1991. Ordinary bed capacity1 ScopeThis standard specifies the general bed capacity (hereinafter referred to as bed capacity) the types and basic dimensions, requirements, test methods, inspection rules, marks, use Brochures, packaging, transportation and storage. This standard applies to ordinary bed capacity, the product for general gynecological surgery, for inspection.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 9969 General Instructions industrial products3 Types and basic dimensions3.1 bed capacity of the type of side manipulation, double Formula (bed body and legs bed), a variety of actions, human manipulation, postural adjustments to mechanical conveyors Configuration, as shown in Figure 1. Basic dimensions and limit deviations 3.2 bed capacity should meet the requirements in Table 1. Table 1 bed capacity basic dimensions in millimeters Size Code L L1 L2 L3 BH Size 1900 ± 50 750 ± 10 335 ± 10 750 ± 10 535 ± 5 775 ± 25 The basic parameters of the operation of a 3.3 sheets should meet the requirements of Table 2. Table 2 fold angle The basic parameters of the project Fold back the angle ≥45 ° Back under the fold angle ≥7 ° Hip panel folding angle ≥38 ° Inferior gluteal fold plate angle ≥8 ° ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY 0045-2013_English be delivered?Answer: Upon your order, we will start to translate YY 0045-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YY 0045-2013_English with my colleagues?Answer: Yes. The purchased PDF of YY 0045-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YY 0045-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YY 0045-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
