YS/T 992-2014 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 992-2014: Lead anode mud
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 992-2014	159	Add to Cart	3 days	Lead anode mud	Valid

Similar standards

GB/T 469   GB/T 728   YS/T 649   YS/T 993   YS/T 994   YS/T 991   

Basic data

Standard ID: YS/T 992-2014 (YS/T992-2014)
Description (Translated English): Lead anode mud
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.60
Word Count Estimation: 6,645
Date of Issue: 10/14/2014
Date of Implementation: 4/1/2015
Quoted Standard: GB/T 8170; YS/T 87; YS/T 775.1; YS/T 775.2; YS/T 775.3; YS/T 775.4; YS/T 775.5; YS/T 775.6; YS/T 775.7
Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This Standard specifies the lead anode mud of requirements, test methods, inspection rules, packaging, storage and quality forecasting orders and contracts (or orders) content. This Standard applies to lead anode insoluble material produced in electrolyti

YS/T 992-2014: Lead anode mud

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lead anode mud ICS 77.150.60 H62 People's Republic of China Nonferrous Metals Industry Standard Lead Anode Slime Issued on. 2014-10-14 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Henan Yuguang Gold & Lead Co., Ltd. Participated in the drafting of this standard. Shuikoushan Hunan Nonferrous Metals Group Co., Baiyin Nonferrous Group Co., Ltd. Drafters of this standard. Zhao Bo, Chen Yuan election, Wang Ping, Gui, Jiang Dongsheng, Wang Qiuxia, left Jianrong, Li Lili, Wang Chunlin, in Jianzhong, Chen Hui. Lead Anode Slime

1 Scope

This standard specifies the lead anode mud of requirements, test methods, inspection rules, packaging, storage and quality forecasts and single contract (or purchase order) content. This standard applies to lead the insoluble material generated at the anode in the electrolytic refining process for refining precious metals and other valuable elements to use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values and judgment YS/T 87 copper anode slime lead electrolysis method of sampling and sample preparation YS/T 775 (all parts), chemical analysis of lead anode mud

3 Requirements

3.1 Categories Lead anode mud by Ag content is divided into three grades. one product, two products, three products. When the Ag content is less than 30kg/t, lead to positive Pole mud Au content classification. When the anode mud Au, Ag content satisfies the above level to level divide Ag content based. 3.2 Chemical composition 3.2.1 lead anode mud chemical composition shall comply with the requirements in Table 1. Table 1 chemical composition of lead anode mud grade chemical composition Main content of not less than/(kg/t) impurity content (mass fraction), not greater than /% Ag Au As First Grade 100 0.3 5.0 Second Grade 50 0.2 10.0 Grade III 30 0.1 15.0 Note. The chemical composition of lead anode mud dry basis. 3.2.2 Lead anode mud Pb, Sb, Bi and other impurities is not required, but it should be reported in the quality of the analysis results in a single forecast. For other special Special requirements, negotiated by both parties and specified in the contract. 3.2.3 Lead anode slime moisture content of not more than 30%. 3.3 appearance quality 3.3.1 Lead anode mud shall not be greater than 10mm of lead shot, sturdy material, shall not lead slag and other foreign matter. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 992-2014_English be delivered?

Answer: Upon your order, we will start to translate YS/T 992-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 992-2014_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 992-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.