YS/T 817-2012 PDF EnglishUS$125.00 · In stock · Download in 9 seconds
YS/T 817-2012: High purity tellurium Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
YS/T 817-2012: High purity tellurium---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YST817-2012YS NONFERROUS METALS INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 77.150.99 H 62 High purity tellurium 高 纯 碲 Issued on: NOVEMBER 7, 2012 Implemented on: MARCH 1, 2013 Issued by. Ministry of Industry and Information Technology of the People's Republic of China Table of ContentsForeword... 3 1 Scope... 4 2 Normative references... 4 3 Requirements... 4 4 Test methods... 5 5 Inspection rules... 6 6 Marking, packaging, transportation and storage... 8 7 Contents of the contract (or purchase order)... 9 High purity tellurium1 ScopeThis standard specifies the requirements, inspection methods, inspection rules, packaging, marking, transportation, storage, quality certificate and contract (or purchase order) contents of high-purity tellurium. This standard applies to high-purity tellurium, which is mainly used in infrared detectors, infrared lasers, telluride optical fibers, solar cells, gamma-ray detectors, ohmic contacts, semiconductor cooling elements, copier photosensitive elements, perpendicular magnetic recording materials and other fields.2 Normative referencesThe following documents are essential for the application of this document. For any dated referenced document, only the dated version applies to this document. For any undated referenced document, the latest version (including all amendments) applies to this document. GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgment of limiting values3 Requirements3.1 Product categories High-purity tellurium is classified into two grades according to its chemical composition. Te99.999 and Te99.9999. 3.2 Chemical composition 3.2.1 The chemical composition of high-purity tellurium shall comply with the requirements of Table 1. 3.2.2 The rounding off of the last digit value of high-purity tellurium impurities and the determination of the rounded-off value shall be carried out in accordance with Chapter 3 and 4.3.3 of GB/T 8170-2008, respectively. 3.3 High-purity tellurium shall be in the form of rectangular trapezoid or powder particles. The weight and particle size shall be determined by negotiation between the supplier and the buyer. 3.4 Appearance quality High-purity tellurium shall be clean and free of inclusions visible to the naked eye. 3.5 Others If the purchaser has other requirements for the chemical composition and appearance quality of high-purity tellurium, they shall be determined through negotiation between the supply and demand parties.4 Test methods4.1 The arbitration analysis method for the chemical composition of high-purity tellurium shall be determined by negotiation between the supplier and the buyer. 4.2 The weight of high-purity tellurium shall be checked by weighing. 4.3 The appearance quality of high-purity tellurium shall be inspected by visual inspection.5 Inspection rules5.1 Inspection and acceptance 5.1.1 High-purity tellurium shall be inspected by the supplier's technical supervision department to ensure that the product quality complies with this standard or the provisions of the contract (or purchase order), and a quality certificate shall be completed. 5.1.2 The purchaser may inspect the received products in accordance with the provisions of this standard. If the inspection results are inconsistent with the provisions of this standard or the contract (or purchase order), the purchaser shall raise the issue with the supplier within 30 days of receipt of the products for resolution through negotiation between the supplier and the purchaser. If arbitration is required, sampling shall be conducted on the purchaser's site jointly by the purchaser and the supplier. 5.2 Batching High-purity tellurium shall be submitted for inspection in batches. One batch shall consist of tellurium ingots of the same grade cast from the same batch of raw materials, with each batch not exceeding 100 kg. 5.3 Inspection items Each batch of high-purity tellurium shall be inspected for chemical composition, appearance quality and weight of the tellurium ingots. 5.4 Sampling and sample preparation 5.4.1 Sampling and sample preparation for chemical composition of high-purity tellurium ingots (Te99.999) 5.4.1.1 Sampling quantity. Randomly select 20% of the total number of tellurium ingots as sample ingots. The total number of sample ingots shall be a multiple of 6 to facilitate grouping. If the number of ingots after grouping is less than 6, they shall be supplemented from the tellurium ingots, but they shall not be discarded. 5.4.1.2 Sampling method. Drill the ingots in groups of 6 and take samples. No lubricant shall be used and the drilling speed shall not cause oxidation of the specimen. The surface of the sample shall be removed and the drilling depth shall be between one-half and two-thirds of the ingot thickness. Drilling method. Use a tungsten carbide drill with a diameter of 6~10 mm to take samples. Arrange the casting surface A and the bottom surface B in sequence to form a rectangle. Draw two diagonal lines on the rectangle. The two points where the two diagonal lines intersect with the longitudinal center line of each ingot are the sampling points of the ingot, as shown in Figure 1. 5.4.1.3 Preparation of test specimens. Collect the drilled powder sample, mix thoroughly, and then package it. The specimen shall be no less than 100 g and divided into three bags; each bag shall be no less than 30 g. 5.4.2 Sampling for chemical composition of high-purity tellurium ingot (Te99.9999) Remove 10%~15% of the head of each ingot and 20%~25% of the tail, take samples at the head, middle and tail of the middle section, grind them into powder as test specimens. 5.4.3 Sampling for chemical composition of high-purity tellurium powder and tellurium granules (Te99.999) Use a polyvinyl chloride sampler to insert two-thirds of the packaging drum to take the sample, and place the sample in a sample bag; the sample shall be no less than 300 g, mixed well and divided into three portions. 5.4.4 Sampling for chemical composition of high-purity tellurium powder and tellurium granules (Te99.9999) Insert a polytetrafluoroethylene sampling spoon into two-thirds of the product packaging bottle to take the sample, and place the sample of no less than 30 g in a sample bottle; mix well and divide it into corresponding portions according to test needs. 5.5 Determination of test results ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of YS/T 817-2012 be delivered?Answer: The full copy PDF of English version of YS/T 817-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of YS/T 817-2012_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 817-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YS/T 817-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of YS/T 817-2012?A step-by-step guide to download PDF of YS/T 817-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "YS/T 817-2012". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
