YS/T 786-2012 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 786-2012: Shaped refractory insulating products. Red mud and flyash bricks
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 786-2012	189	Add to Cart	3 days	Shaped refractory insulating products. Red mud and flyash bricks	Valid

Similar standards

YS/T 575.23   GB/T 23615.1   YS/T 575.24   YS/T 273.5   YS/T 273.11   YS/T 787   

Basic data

Standard ID: YS/T 786-2012 (YS/T786-2012)
Description (Translated English): Shaped refractory insulating products. Red mud and flyash bricks
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H30
Classification of International Standard: 73.060.10
Word Count Estimation: 7,783
Quoted Standard: GB/T 2992; GB/T 2998; GB/T 5072; GB/T 5988; GB/T 10325; GB/T 10326; GB/T 16546; YB/T 4130
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 55 of 2012; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the red mud fly ash bricks refractory insulation requirements, test methods, inspection rules and the packaging, labeling, transportation, storage and quality certificate. This standard applies to the red mud fly ash brick fire-res

YS/T 786-2012: Shaped refractory insulating products. Red mud and flyash bricks

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Shaped refractory insulating products.Red mud and flyash bricks ICS 73.060.10 H30 People's Republic of China Nonferrous Metals Industry Standard Red Mud and Fly refractory insulation bricks Issued on. 2012-11-07 2013-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Aluminum Group Co., Ltd. Shanxi Aluminium Refractories. The main drafters of this standard. Leifa Xiang, Ruanke Sheng Jiao Bo lock, Hou Huize. Red Mud and Fly refractory insulation bricks

1 Scope

This standard specifies the red mud fly ash brick fire-resistant insulation requirements, test methods, inspection rules, packaging, labeling, transportation, storage and quality certificate. This standard applies to fly ash red mud fire-resistant insulation tiles (hereinafter referred to as the material), the material is mainly used for industrial furnace insulation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2992 General shape and size of bricks GB/T 2998 Shaped insulating refractory products bulk density and true porosity test methods GB/T 5072 Refractory cold crushing strength GB/T 5988 Test Methods for permanent change in refractory heating GB/T 10325 Shaped refractory products - Sampling and acceptance testing Inspection method GB/T 10326 Refractory products - size, appearance and section GB/T 16546, shaped refractory products packaging, labeling, transportation and storage YB/T 4130 refractory material of thermal conductivity (water flow plate method)

3 Requirements

3.1 Categories Products into CF-0.6, CF-0.8 two grades. 3.2 Physical properties Physical properties of materials shall comply with the provisions in Table 1. Table 1 Trademark Bulk density g/cm3 Compressive strength MPa On heating /% 900 ℃ × 8h Thermal conductivity/(W/m · K) 300 ℃ ± 10 ℃ CF-0.6 ≤0.6 ≥1.0 ≤2 ≤0.20 CF-0.8 ≤0.8 ≥2.0 ≤2 ≤0.33 3.3 Appearance and size The appearance and size of the material should be consistent with the provisions of GB/T 2992 can also be manufactured on demand side, drawing. 3.4 Dimensions tolerance, distortion, cracks and missing angle, lack of edge size allowed 3.4.1 Dimensions tolerance, distortion, cracks should meet the requirements of Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 786-2012_English be delivered?

Answer: Upon your order, we will start to translate YS/T 786-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 786-2012_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 786-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.