YS/T 746.12-2010 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 746.12-2010: Methods for chemical analysis of lead-free tin-based solders. Part 12: Determination of Indium content. Na2EDTA titrimetric method Status: Valid
Basic dataStandard ID: YS/T 746.12-2010 (YS/T746.12-2010)Description (Translated English): Methods for chemical analysis of lead-free tin-based solders. Part 12: Determination of Indium content. Na2EDTA titrimetric method Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H13 Classification of International Standard: 77.040.30 Word Count Estimation: 6,633 Date of Issue: 2010-11-22 Date of Implementation: 2011-03-01 Regulation (derived from): MIIT (2010) No. 126 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the indium solder lead-free tin-based method for determination. This standard applies to lead-free tin-based solder indium content. Measuring range: 20. 00% ~ 60. 00%. YS/T 746.12-2010: Methods for chemical analysis of lead-free tin-based solders. Part 12: Determination of Indium content. Na2EDTA titrimetric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for chemical analysis of lead-free tin-based solders.Part 12. Determination of Indium content.Na2EDTA titrimetric method ICS 77.040.30 H13 People's Republic of China Nonferrous Metals Industry Standard No Tin Lead-based solder chemical analysis Part 12. Determination of indium content Na2EDTA titration Part 12. DeterminationofIndiumcontent- Issued on. 2010-11-22 2011-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordYS/T 746 "non-Pb-based solder chemical analysis method" is divided into 17 parts. --- Part 1 Determination of tin content Coke sexual gallic acid Covering - lead nitrate titration method --- Part 2 of silver content - Flame atomic absorption spectrometry and potentiometric titration with potassium thiocyanate --- Part 3 of copper content - Flame atomic absorption spectrometry and titration with sodium thiosulfate --- Part 4 of lead content - Flame Atomic Absorption Spectrometry --- Part 5 of bismuth content - Flame atomic absorption spectrometry and titration Na2EDTA --- Part 6 of antimony content - Flame Atomic Absorption Spectrometry --- Part 7 Determination of iron content by flame atomic absorption spectrometry --- Part 8 of arsenic content of arsenic, antimony molybdenum blue spectrophotometric method --- Part 9 Determination of zinc content by flame atomic absorption spectrometry and titration Na2EDTA Part 10 Determination of aluminum content --- first electrothermal atomic absorption spectrometry --- Part 11 of cadmium content - Flame Atomic Absorption Spectrometry --- Part 12 Determination of indium titration Na2EDTA --- Part 13 Determination of nickel content by flame atomic absorption spectrometry --- Part 14 Determination of the phosphorus content of the first crystal violet - heteropoly acid phosphovanadomolybdate spectrophotometry --- Part 15 Determination of germanium content salicylfluorone spectrophotometry --- Part 16 Determination of rare earth Arsenazo Ⅲ spectrophotometry --- Part 17 silver, copper, lead, bismuth, antimony, iron, arsenic, zinc, aluminum, cadmium, nickel, indium content was measured by inductively coupled plasma optical emission Spectroscopy This is Part 12. This section is in accordance with GB/T 1.1-2009 given rules drafted. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is drafted. Yunnan Tin Group Co., Ltd. Participated in the drafting of this section. Gejiu Yunnan Metallurgical Research Institute. The main drafters of this section. Bai Yanhua, after red, Xia from Chengdu, Sun Biao, Miao Lu, Wu Lianfen, Cai Qian, Xiao Zhongting. No Tin Lead-based solder chemical analysis Part 12. Determination of indium content Na2EDTA titration1 ScopeYS/T 746 This section specifies the determination method based solder lead-free solder in the indium content. This section applies to the determination of lead-free tin-based solders in indium content. Measurement range. 20.00% - 60.00%.2 Method summarySamples with hydrochloric acid, hydrogen peroxide dissolved in hydrochloric acid, hydrobromic exclude volatile tin, antimony tartrate in pH2.0 ~ 2.5 - the slow sodium tartrate Red liquid, with xylenol orange as indicator, titrated with a standard solution titration Na2EDTA indium. Bismuth > 0.5mg interfere with the determination.3 ReagentsUnless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 hydrochloride (ρ1.19g/mL). 3.2 sulfate (ρ1.84g/mL). 3.3 sulfate (11). 3.4 hydrobromide (ρ1.49g/mL). 3.5 Hydrogen peroxide (30%). 3.6 tartaric acid - sodium tartrate buffer solution. Weigh 45g 23g tartaric acid and sodium tartrate in 200mL beaker, 200mL aqueous Solutions diluted with water to 1000mL, and mix. 3.7 Indium standard solution. Weigh 2.0000g indium (≥99.99%) in 300mL beaker, add 50mL hydrochloric acid, cover sheet pan, over low heat Completely dissolved, cooled to room temperature. Water moved into 500mL volumetric flask and dilute to volume, and mix. This solution containing 4mg per ml of indium. 3.8 Na2EDTA Standard Solution (cNa2EDTA = 0.03mol/L). 3.8.1 preparation. Weigh 110gNa2EDTA dissolved in 1000mL water, heated, and stirred to dissolve completely, cooled to room temperature, diluted with water 10L, and mix. 3.8.2 Calibration. Pipette three 25.00mL indium standard solution (3.7) were placed in 300mL beaker, add 5mL hydrochloric acid (3.1), Low temperature steam until nearly dry, coolish, along Beibi 25mL tartaric acid - sodium tartrate buffer solution (3.6), add a little water, low-temperature heating to about 60 ℃, ascorbic acid 0.2g, shake, add 1 drop of xylenol orange solution was still hot Na2EDTA standard titration (3.8) was titrated to Solution from red to bright yellow as the end point. While doing the blank test. According to formula (1) calculate the actual concentration Na2EDTA standard titration solution. c = ρ · V1 (V2-V0) × 114.82 (1) Where. The actual concentration c --- Na2EDTA standard titration solution, expressed in moles per milliliter (mol/mL); Mass concentration ρ --- indium standard solution, in milligrams per milliliter (mg/mL); ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 746.12-2010_English be delivered?Answer: Upon your order, we will start to translate YS/T 746.12-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 746.12-2010_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 746.12-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
