YS/T 745.9-2012 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 745.9-2012: Methods for chemical analysis of copper anode slime. Part 9: Determination of antimony content. Flame atomic absorption spectrophotometry method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 745.9-2012	159	Add to Cart	3 days	Methods for chemical analysis of copper anode slime. Part 9: Determination of antimony content. Flame atomic absorption spectrophotometry method	Valid

Similar standards

GB/T 4698.17   XB/T 619   YS/T 555.11   YS/T 745.11   YS/T 745.10   YS/T 745.2   

Basic data

Standard ID: YS/T 745.9-2012 (YS/T745.9-2012)
Description (Translated English): Methods for chemical analysis of copper anode slime. Part 9: Determination of antimony content. Flame atomic absorption spectrophotometry method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H14
Classification of International Standard: 77.120.01
Word Count Estimation: 6,680
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 55 of 2012; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the copper anode mud Determination of antimony content. This standard applies to copper anode mud of antimony content. Measuring range: 0. 50% 10. 00%.

YS/T 745.9-2012: Methods for chemical analysis of copper anode slime. Part 9: Determination of antimony content. Flame atomic absorption spectrophotometry method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of copper anode slime.Part 9. Determination of antimony content.Flame atomic absorption spectrophotometry method ICS 77.120.01 H14 People's Republic of China Nonferrous Metals Industry Standard Methods for chemical analysis of copper anode slime Part 9. Determination of antimony content Flame Atomic Absorption Spectrometry Part 9. Determinationofantimonycontent- Issued on. 2012-11-07 2013-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 745 "Methods for chemical analysis of copper anode mud" is divided into nine sections. --- Part 1. Determination of copper content iodometry; --- Part 2. gold and silver content determination fire assay gravimetric method; --- Part 3. the amount of platinum and palladium contents - fire assay enrichment - Inductively coupled plasma atomic emission spectrometry; --- Part 4. Determination of the amount of selenium iodometry; --- Part 5. Determination of tellurium content dichromate method; --- Part 6. Determination of lead content Na2EDTA titration; --- Part 7. Determination of bismuth content - Flame atomic absorption spectrometric method and Na2EDTA titration; --- Part 8. Determination of arsenic content by hydride generation - atomic fluorescence spectrometry; --- Part 9. Determination of antimony content - Flame atomic absorption spectrometry. This section YS/T Section 9745 of. This section drafted in accordance with GB/T 1.1-2009 given rules. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is responsible for drafting unit. Daye Nonferrous Metals Corporation. This section is drafted. Guangzhou Nonferrous Metal Research Institute. Participated in the drafting of this section. Jinchuan Group Ltd., Tongling Nonferrous Metals Group Holdings Co., Jiangxi Copper Company Limited Division Shuikoushan Hunan Nonferrous Metals Group Co., Ltd. The main drafters of this section. Dai Fengying, Zhang Jin, Liu Tianping, Liu Xiaohui, Lin Shan, Lin, with Zhao, Tang Hua whole, Jun Zeng, Du Tao, Liqin Mei, Tan Pingsheng. Methods for chemical analysis of copper anode slime Part 9. Determination of antimony content Flame Atomic Absorption Spectrometry

1 Scope

YS/T in this part 745 specifies the method for determination of copper anode mud antimony content. This section applies to the determination of copper anode mud antimony content. Measuring range. 0.50% to 10.00%.

2 Method summary

The sample is dissolved in nitric acid, ammonium hydrogen fluoride was added to dissolve silicate, adding sulfuric acid smoke. Tartaric acid solution as complexing agent, in hydrochloric acid medium Using air - acetylene flame atomic absorption spectrometer wavelength 217.6nm measured absorbance of antimony, calculated as working curve method antimony content.

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 ammonium hydrogen fluoride. 3.2 nitric acid (ρ = 1.42g/mL). 3.3 hydrochloric acid (ρ = 1.19g/mL). 3.4 sulfate (ρ = 1.84g/mL). 3.5 tartaric acid solution (200g/L). 3.6 Antimony standard stock solution. Weigh 0.5000g metal antimony (≥99.95%) placed in 250mL beaker, add 20mL sulfuric acid (3.4), cover the dish table, a hot plate at low heat until completely dissolved, remove the cooling. Sulfuric acid (13) The solution was transferred to 500mL capacity Flask, and dilute to the mark with sulfuric acid (13), and mix. This solution 1mL 1mg containing antimony. 3.7 Antimony standard solution. Pipette 25.00mL antimony standard stock solution (3.6) in 250mL volumetric flask, was added 50mL of hydrochloric acid (3.3), Dilute with water to volume, and mix. This solution 1mL containing 100μg antimony.

4 Instrument

Atomic absorption spectrometer, with antimony hollow cathode lamp. Under optimum working conditions for those who can reach the following indicators can be used. --- Sensitivity. consistent with measurements in a solution matrix solution, characterized in measuring the concentration of antimony standard solution should be less than 0.2μg/mL. --- Precision. standard solution with the highest concentration of 10 times the absorbance measurements, the standard deviation should not exceed the average absorbance of 1.0%; The lowest concentration of standard solution used (instead of "zero" concentration of the solution) absorbance measured 10 times, and the standard deviation should not exceed the maximum concentration 0.5% of the mean absorbance of standard solution. --- Linear curve. the curve according to concentration, divided into five sections, the difference between the absorbance of the absorbance difference between the highest and the lowest segment segment Ratio of not less than 0.7. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 745.9-2012_English be delivered?

Answer: Upon your order, we will start to translate YS/T 745.9-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 745.9-2012_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 745.9-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.