YS/T 736-2010 English PDF

US$139.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 736-2010: Determination of the volatile matter content in carbon glue used for aluminium production
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 736-2010	139	Add to Cart	2 days	Determination of the volatile matter content in carbon glue used for aluminium production	Valid

Similar standards

YS/T 575.23   GB/T 23615.1   YS/T 575.24   YS/T 739.5   YS/T 739.1   YS/T 728   

Basic data

Standard ID: YS/T 736-2010 (YS/T736-2010)
Description (Translated English): Determination of the volatile matter content in carbon glue used for aluminium production
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H30
Classification of International Standard: 71.100.10
Word Count Estimation: 5,553
Date of Issue: 2010-11-22
Date of Implementation: 2011-03-01
Regulation (derived from): MIIT (2010) No. 126
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the charcoal clay Determination of volatile matter. This standard applies to charcoal clay Determination of volatile matter.

YS/T 736-2010: Determination of the volatile matter content in carbon glue used for aluminium production

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of the volatile matter content in carbon glue used for aluminium production ICS 71.100.10 H30 People's Republic of China Nonferrous Metals Industry Standard Carbonaceous materials used in aluminum carbon cements Determination of volatile Issued on. 2010-11-22 2011-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Aluminum Corporation of China Guizhou Branch. The main drafters of this standard. Pastoral, Wu Yan, Xie Qinglin, Zeng Ping. Carbonaceous materials used in aluminum carbon cements Determination of volatile

1 Scope

This standard specifies the method for the determination of volatile carbon in clay. This standard applies to the determination of points in volatile carbon cement.

2 Method summary

In the case of absence of air, the sample was heated at a certain temperature burning a certain time, to calculate the quality of the volatile substance burning The percentage of samples before the mass.

3 Instrument

3.1 porcelain crucible. volume 25mL, cover, catchy outer diameter of 38mm ~ 39mm, Lower outer diameter 22mm ~ 25mm, height 37mm ~ 38mm. 3.2 dryer. built-in desiccant. 3.3 Balance. a sense of the amount of 0.0001g. 3.4 muffle furnace. temperature controlled at 900 ℃ ± 10 ℃. 3.5 Crucible holder. heat-resistant metal wire, with the bottom of the crucible bottom distance is 20mm ~ 25mm.

4 Sample

Each sample taken 1L, sampling should sufficiently stirred, sealed in containers, were detected and analyzed within 48h. Step 5 Analysis 5.1 Determination of the number of It was assayed in parallel. 5.2 Determination 5.2.1 The porcelain crucible (3.1) placed in a muffle furnace of 900 ℃ ± 10 ℃ (3.4), the burning 1h, taken out, placed in a desiccator (3.2), cooled 30min, weighing, accurate to 0.0001g; repeated burning, weighed to constant weight (m1). 5.2.2 constant weight porcelain crucible (5.2.1), the sample weighed 1.0000g, accurate to 0.0001g (m0), covered with a crucible lid on crucible Pot rack, when the furnace temperature reaches 430 ℃ ± 20 ℃, together quickly crucible crucible frame together into the furnace burning 6min, and then remove the crucible Into the furnace temperature reached 900 ℃ ± 10 ℃ high temperature furnace, burning 6min, taken in air cooled 3min ~ 5min, and then into the dryer (3.2) to cool to room temperature (about 20min), weighed (m2), accurate to 0.0001g. After the ceramic crucible and the crucible placed in a muffle furnace frame required Muffle furnace at a temperature within 3min Back 900 ℃ ± 10 ℃, otherwise the test results invalid. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 736-2010_English be delivered?

Answer: Upon your order, we will start to translate YS/T 736-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 736-2010_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 736-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.