YS/T 734-2010 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 734-2010: Carbon materials used for aluminium production. Testing method for dust Blaine fineness

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 734-2010	209	Add to Cart	3 days	Carbon materials used for aluminium production. Testing method for dust Blaine fineness

Similar standards

YS/T 575.23   GB/T 23615.1   YS/T 575.24   YS/T 739.5   YS/T 739.1   YS/T 728   

Basic data

Standard ID: YS/T 734-2010 (YS/T734-2010)
Description (Translated English): Carbon materials used for aluminium production. Testing method for dust Blaine fineness
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H30
Classification of International Standard: 71.100.10
Word Count Estimation: 6,680
Date of Issue: 2010-11-22
Date of Implementation: 2011-03-01
Regulation (derived from): MIIT (2010) No. 126
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the carbonaceous materials used in aluminum powder Blaine fineness test methods. This standard applies to particle size <0. 2mm of carbon materials Blaine Determination of fineness.

YS/T 734-2010: Carbon materials used for aluminium production. Testing method for dust Blaine fineness

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Carbon materials used for aluminium production.Testing method for dust Blaine fineness ICS 71.100.10 H30 People's Republic of China Nonferrous Metals Industry Standard Carbonaceous materials used in aluminum powder Blaine fineness test methods Issued on. 2010-11-22 2011-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Aluminum Corporation of China Guizhou Branch. The main drafters of this standard. Pastoral, Yu Bei. Carbonaceous materials used in aluminum powder Blaine fineness test methods

1 Scope

This standard specifies the carbonaceous materials used in aluminum powder Blaine fineness test methods. This standard applies to a particle size < 0.2mm Determination of carbon materials Blaine fineness.

2 principle of the method

Using penetration method works when a certain amount of gas through the layer of compacted samples infiltrated, the U-shaped tube is at rest Tic in a vacuum state of the liquid column to rise slowly, eliminating the vacuum state, measuring the time required for the process, the calculated powder samples of cloth Laing fineness, eventually results in Blaine coefficient characterization.

3 Instrument

Blaine 3.1 devices. The measuring principle is shown in Figure 1. It made a U-shaped tube, a cylindrical sample container, a perforated disk and a Osmotic device component, U-shaped tube is fixed to the inside of the instrument holder. 1 --- Motor; 2 --- pressurizing piston; 3 --- sample container; 4 --- perforated disk; 5 --- control valve; 6 --- diaphragm; 7 --- sponge piston; 8 --- indicator solution injection mark; . 9 --- an upper measuring mark; 10 --- lower part measuring mark; . 11 --- level mark.

1 Blaine schematic assembly equipment

......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 734-2010_English be delivered?

Answer: Upon your order, we will start to translate YS/T 734-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 734-2010_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 734-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.