YS/T 720-2009 English PDFUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 720-2009: Sintered nicked piece
Basic dataStandard ID: YS/T 720-2009 (YS/T720-2009)Description (Translated English): Sintered nicked piece Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H72 Classification of International Standard: 77.160 Word Count Estimation: 6,670 Date of Issue: 2009-12-04 Date of Implementation: 2010-06-01 Quoted Standard: GB/T 8647.1; GB/T 8647.2; GB/T 8647.3; GB/T 8647.5; GB/T 8647.6 Regulation (derived from): MIIT [2009] No. 66 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the requirements of sintered nickel plate, test methods, inspection rules, packaging, labeling, transportation, storage and purchase order (or contract) content. This standard applies obtained by sintering nickel plate for magnetic materials, nickel alloy steel, catalysts, battery materials and other industries. YS/T 720-2009: Sintered nicked piece---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sintered nicked piece ICS 77.160 H72 People's Republic of China Nonferrous Metals Industry Standard Sintered nickel sheet Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard is drafted by. High-tech Co., Ltd. Shenzhen Grammy. Participated in the drafting of this standard. Jingmen Grammy New Materials Co., Ltd. The main drafters of this standard. Han Hongtao, Xu Kaihua, Zhou Jifeng, pear Yan, Wu Guangyuan. Sintered nickel sheet1 ScopeThis standard specifies the sintered nickel sheet requirements, test methods, inspection rules, packaging, labeling, transportation, storage and purchase order (or contract) content. This standard applies to sintered nickel sheet obtained by the method for magnetic materials, nickel alloys, catalysts, battery materials and other industries.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Can you use the latest versions of these files. For undated reference documents, the latest versions apply to this standard. GB/T 8647.1 methods for chemical analysis of nickel Determination of iron content sulfonic acid spectrophotometry Determination of GB/T 8647.2 methods for chemical analysis of nickel aluminum content of electrothermal atomic absorption spectrometry GB/T 8647.3 methods for chemical analysis of nickel - Determination of silicon content - Molybdenum blue spectrophotometric method GB/T 8647.5 methods for chemical analysis of nickel magnesium content - Flame Atomic Absorption Spectrometry GB/T 8647.6 methods for chemical analysis of nickel cadmium, cobalt, copper, manganese, lead and zinc contents - Flame Atomic Absorption Spectrometry3 Requirements3.1 Categories Sintered nickel sheet according to chemical composition divided into three grades. SNi1, SNi2, SNi3. Representation 3.2 grade S --- indicates that the product produced by sintering; Ni1, Ni2, Ni3 --- indicates the product level. 3.3 Chemical composition The chemical composition of the sintered nickel sheet shall comply with the requirements of Table 1. Table 1 chemical composition of the sintered nickel sheet mass fraction /% Trademark chemical composition Ni not less than Impurity content of not more than Co Cu Fe Ca Mg Pb Zn Cd Mn Na Al Si O SNi1 99.90 0.005 0.008 0.008 0.008 0.008 0.005 0.002 0.005 0.008 0.008 0.005 0.005 0.05 SNi2 99.80 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 SNi3 99.70 0.015 0.02 0.02 0.02 0.015 0.02 0.01 0.015 0.01 0.02 0.01 0.015 0.2 Note. the nickel content of 100% minus the sum of the Table in Central Africa oxygen impurity element measured margin. 3.4 appearance quality Sintered nickel sheet should be cleared surface of the powder particles, without residue and foreign matter. 3.5 Other Requirements Demand side, such sintered nickel sheet size and other special requirements, supply and demand can be negotiated between the parties and specified in the contract. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 720-2009_English be delivered?Answer: Upon your order, we will start to translate YS/T 720-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 720-2009_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 720-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
