YS/T 665-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 665-2024	RFQ	ASK	3 days	(Refined aluminum ingots for remelting)	Valid
YS/T 665-2018	279	Add to Cart	3 days	Refined aluminium ingot for remelting	Obsolete
YS/T 665-2009	239	Add to Cart	3 days	Refined aluminum ingot for remelting	Obsolete

Basic data

Standard ID: YS/T 665-2024 (YS/T665-2024)
Description (Translated English): (Refined aluminum ingots for remelting)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H61
Classification of International Standard: 77.150.10
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 665-2018
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates and order contents of refined aluminum ingots for remelting. This standard applies to refined aluminum ingots for remelting produced by three-layer liquid electrolysis, segregation and single electrolysis.

YS/T 665-2009: Refined aluminum ingot for remelting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Refined aluminum ingot for remelting ICS 77.120.10 H61 People's Republic of China Nonferrous Metals Industry Standard Remelting with fine aluminum ingots 2009-12-04 released 2010-06-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard is based on the international standard ISO 115..2003 "Refining aluminum ingot grades and chemical composition" to develop. Mainly with ISO 115. Three grades in.2003. A199.995, A199.99, A199.98. In comparison, A199.995 in this standard is strictly ISO 115. 2003, A199.99 basically the same, A199.98 loose in ISO 115..2003. The use of remelting with aluminum ingots should be fully preheated after the product added to the furnace (because of its surface shrink holes, holes in the water, fully warm Can prevent the fine aluminum ingots in case of high temperature melt explosion). This standard by the National Nonferrous Metals Standardization Technical Committee proposed and centralized. This standard is responsible for drafting units. Xinjiang Zhonghe Co., Ltd., China Aluminum Co., Ltd. Guizhou Branch. This standard participates in the drafting unit. Baotou Aluminum Company Limited. The main drafters of this standard. Liu Jie, Zhai Xinsheng, He Xinguang, Song Yuping, Hong Tao, Zeng Ping, Gao Shulan, Yang Menggang, Cui Jian, Shen Qinghua. Remelting with fine aluminum ingots

1 Scope

This standard specifies the requirements, test methods, inspection rules, packaging, marking, transportation and storage of fine aluminum ingots for remelting. This standard applies to three layers of liquid electrolysis and segregation production of heavy aluminum ingots.

2 normative reference documents

The terms of the following documents are hereby incorporated by reference into this standard. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this standard, however, encourage the parties to reach an agreement under this standard Whether you can use the latest version of these files. For undated references, the latest edition applies to this standard. Photoelectric Direct Reading Emission Spectrometric Analysis Method for Aluminum and Aluminum Alloys GB/T 7999 Representation and Judgment of Numerical Correction Rule and Limit Value in GB/T 8170-2008 GB/T 20975 (all parts) Methods for chemical analysis of aluminum and aluminum alloys YS/T 244 (all parts) High purity aluminum chemical analysis method YB/T 025 steel for packing

3 request

3.1 grade The remelted aluminum ingot is divided into A199.995, A199.993A, A199.993, A199.99A, A199.99, A199.98, A199.95 seven grades. 3.2 Chemical composition The chemical composition of the fine aluminum ingot should meet the requirements of Table 1. Table 1 Grade chemical composition/% Al not less than Impurities, not more than Fe Si Cu Mg Zn Ti Mn Ga Al 99.995 99.995 0.0010 0.0010 0.0015 0.0015 0.0005 0.0005 0.0007 0.0010 0.0010 Al 99.993A 99.993 0.0010 0.0010 0.0030 0.0020 0.0010 0.0010 0.0008 0.0010 0.0010 Al 99.993 99.993 0.0015 0.0015 0.0030 0.0025 0.0010 0.0010 0.0010 0.0012 0.0010 Al 99.99A 99.990 0.0010 0.0010 0.0050 0.0025 0.0010 0.0010 0.0010 0.0012 0.0010 Al 99.99 99.990 0.0030 0.0030 0.0050 0.0030 0.0010 0.0010 0.0010 0.0015 0.0010 Al 99.98 99.980 0.0070 0.0070 0.0080 0.0030 0.0020 0.0020 0.0020 0.0020 0.0030 Al 99.95 99.950 0.0200 0.0200 0.0100 0.0050 0.0050 0.0050 0.0020 0.0020 0.0100 Note 1. The difference in the sum of the measured values of other impurities in the aluminum mass fraction of 100% and the impurity elements listed in the table and the mass fraction equal to or greater than 0.0010% Value, the sum of the elements before the value to be expressed to 0.0 × × ×%, sum will be summed after the sum of 0.0 × × ×%. Note 2. Lead, arsenic, cadmium, and mercury content of heavy metal elements not specified in the table shall not be subjected to routine analysis, but should be analyzed regularly and tested at least once a year (Cd + Hg + Pb) ≤ 0.0095%, As ≤ 0.0090%. Other impurity elements are negotiated by both parties. Note 3. The numerical analysis is carried out using the revision comparison method, according to the relevant provisions of the numerical correction rule GB/T 8170, chapter 3, Limit number consistent. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 665-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 665-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 665-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 665-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 665-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 665-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.