YS/T 627-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 627-2024	RFQ	ASK	3 days	(Deformed magnesium and magnesium alloy ingots)	Valid
YS/T 627-2013	399	Add to Cart	3 days	Wrought magnesium and magnesium alloys rotundity ingots	Obsolete
YS/T 627-2007	319	Add to Cart	3 days	Wrought magnesium and magnesium alloys columniform ingots	Obsolete

Basic data

Standard ID: YS/T 627-2024 (YS/T627-2024)
Description (Translated English): (Deformed magnesium and magnesium alloy ingots)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H61
Classification of International Standard: 77.150.20
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 627-2013
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificates and order forms of deformed magnesium and magnesium alloy round ingots. This standard applies to magnesium and magnesium alloy ingots with a circular cross section used as billets for other deformations such as extrusion or forging.

YS/T 627-2013: Wrought magnesium and magnesium alloys rotundity ingots

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wrought magnesium and magnesium alloys rotundity ingots ICS 77.150.20 H61 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 627-2007 Wrought magnesium and magnesium alloy round ingot Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YS/T 627-2007 "wrought magnesium and magnesium alloy round ingot." Compared with this standard YS/T 627-2007 main technical Surgery differences are as follows. --- Increased ingot grade and status (see Table 1); --- Increase the marked sample (see 3.1.2); --- Increasing the GB/T 5153 standard does not mention the ingot grades chemical composition requirements (see 3.2); --- Increasing the curvature of the test method ingot schematic (see 4.2.3); --- Increasing the test method ingot end face cut slope diagram (see 4.2.4); --- Modify the size deviation ingot, ingot diameter, length, curvature and the end cut inclination single list of requirements (see 3.3); --- Modify the appearance of ingot quality requirements (see 3.5); --- Modify the inspection and acceptance of the Batch requirements (see 5.1); --- Modify the test result determination (see 5.5). This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Northeast Light Alloy limited liability company. Participated in the drafting of this standard. Zibo Fergus corrosion limited liability company, Shanxi Huasheng silver Magnesium Co., Ltd., Shandong Huasheng Rong Magnesium Technology Co., Ltd. The main drafters of this standard. Cao Yongliang Liu research, Zhang Yanfei, Chai Shao Chun, Shen Bao Zhai, Wu Zhongwen, Wen Yu, Feng Hongfen, Xiao Yang, Chang Huo day. This standard replaces the standards previously issued as follows. --- YS/T 627-2007. Wrought magnesium and magnesium alloy round ingot

1 Scope

This standard specifies the deformation of magnesium and magnesium alloy round ingot requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality Certificate with your order (or contract) content. This standard applies to a circular cross-section, as another modified magnesium and magnesium alloy ingots (hereinafter blank using extrusion or forging He said ingot).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage GB/T 4297 wrought magnesium alloy low magnification inspection method GB/T 5153 wrought magnesium and magnesium alloy grades and chemical composition GB/T 13748 (all parts) magnesium and magnesium alloy chemical analysis method GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method

3 Requirements

3.1 Categories 3.1.1 grade, status, specifications Ingot grade, status and specifications should meet the requirements of Table 1. When the demand side need other brands, specifications, determined after consultation by both parties Stated in the order (or contract) in. Table 1 Grade status Specifications/mm Nominal diameter ingot length Mg99.95, Mg99.80, Mg99.50, Mg99.00, M2M, AZ31B, AZ40M, AZ41M, AZ61A, AZ61M, AZ63B, AZ80A, AZ80M, ME20M, ZK61M, ZK61S, ZK40A, WE43B, WE54A, M1A Cast or homogenized < 800 < 6000 3.1.2 tag example Ingot mark by product name, standard number, ingot diameter, the length of the order of representation. Tag example as follows. Example. AZ40M grades, cast a diameter of 300mm, 2000mm length of ingot tagged. Ingot YS/T 627-AZ40M-φ300 × 2000 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 627-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 627-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 627-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 627-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 627-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 627-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.