YS/T 568.2-2008 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 568.2-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of iron content. Sulfosal icylic acid spectrophotometric method YS/T 568.2: Historical versions
Basic dataStandard ID: YS/T 568.2-2008 (YS/T568.2-2008)Description (Translated English): Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of iron content. Sulfosal icylic acid spectrophotometric method Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H63 Classification of International Standard: 77.120.99 Word Count Estimation: 6,651 Date of Issue: 2008-03-12 Date of Implementation: 2008-09-01 Older Standard (superseded by this standard): YS/T 568.2-2006 Regulation (derived from): NDRC Notice No. 25 of 2008 Issuing agency(ies): National Development and Reform Commission Summary: This standard specifies the zirconia, hafnia Method for determination of iron content. This standard applies to zirconium oxide, hafnium oxide, iron content. Measuring range: 0. 03 to 2. 0%. YS/T 568.2-2008: Chemical analysis methods for zirconium oxide and hafnium oxide. Determination of iron content. Sulfosal icylic acid spectrophotometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of iron content.Sulfosal icylic acid spectrophotometric method ICS 77.120.99 H63 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 568.2-2006 Zirconium oxide, hafnium oxide chemical analysis Determination of iron content sulfonic acid spectrophotometry Posted 2008-03-12 2008-09-01 implementation National Development and Reform Commission issued ForewordYS/T 568 "zirconium, hafnium oxide chemical analysis method" is divided into 11 parts. --- Part 1. Determination of zirconium and hafnium oxide combined amount of mandelic acid gravimetric method; --- Part 2. Determination of iron content sulfonic acid spectrophotometry; --- Part 3. Determination of silicon content - Molybdenum blue spectrophotometric method; --- Part 4. Determination of aluminum content of chromium azure S- cylpyridinium chloride spectrophotometry; --- Part 5. Determination of sodium content by flame atomic absorption spectrometry; --- Part 6. Determination of the amount of titanium di Zhao DAM spectrophotometry; --- Part 7. Determination of phosphorus content of antimony salt - ascorbic acid - phosphorus molybdenum blue spectrophotometric method; --- Part 8. zirconia aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, hafnium content - Inductively coupled plasma fat Emission spectrometry; --- Part 9. hafnium oxide of aluminum, calcium, magnesium, manganese, sodium, nickel, iron, titanium, zinc, molybdenum, vanadium, zirconium content - Inductively coupled plasma fat Emission spectrometry; --- Part 10. Determination of manganese content - Potassium periodate spectrophotometric method; --- Part 11. Determination of α- linked furoylhydrazone nickel dioxime spectrophotometric method. This is Part 2. The partial replacement of YS/T 568.2-2006 "zirconium oxide, hafnium Determination of iron content" (formerly GB/T 2590.2-1981). This portion of YS/T 568.2-2006 compared to the main changes are as follows. --- Curve by the scope of 0 ~ 7.0μg/mL was adjusted to 0 ~ 2.5μg/mL; --- Added "7.1 repeatability" clause; --- Added "8 Quality assurance and control" clause. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This part by the Beijing Nonferrous Metal Research Institute, China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting. This part by the Guangzhou Research Institute of Nonferrous Metals, Beijing Nonferrous Metal Research Institute drafted. The main drafters of this section. Zhang Jin, Dai Fengying, Mai Libi, Liu Tianping, Fan Ying. This part of the standard replaces the previous editions are. --- GB/T 2590.2-1981, YS/T 568.2-2006. Zirconium oxide, hafnium oxide chemical analysis Determination of iron content sulfonic acid spectrophotometry1 ScopeThis section specifies the determination of zirconia, hafnia iron content. This section applies to zirconium, hafnium oxide - Determination of iron content. Measuring range. 0.03% to 2.0%.2 Method summarySample with sulfuric acid, ammonium sulfate dissolved in ammonia solution pH8 ~ 11, the iron and sulfosalicylic acid to form a yellow complex in a spectrophotometer Meter measuring the absorbance at a wavelength of 425nm. Zirconium, hafnium matrix without interference. Each test solution manganese exists 20μg, 50μg copper, nickel, uranium, 300μg aluminum, 500μg thorium, 1000μg Titanium, phosphorus does not interfere with the determination. Mn greater than 30μg, there is interference when uranium is greater than 100μg, respectively, with hydroxylamine hydrochloride and ammonium carbonate masking.3 Reagents3.1 ammonium sulfate. 3.2 sulfate (ρ1.84g/mL). 3.3 sulfosalicylic acid solution (250g/L). 3.4 hydroxylamine hydrochloride solution (100g/L). 3.5 Ammonia (ρ0.90g/mL). 3.6 ammonium carbonate solution (100g/L). 3.7 nitric acid (1 + 1). 3.8 iron standard stock solution. Weigh 1.0000g metallic iron [(Fe) > 99.9%], placed in 100mL beaker, add 30mL of nitric acid (3.7) until completely dissolved after heating to remove oxides of nitrogen, cooled and transferred to 1L volumetric flask, dilute with water to the mark. This solution 1mL containing 1mg iron. 3.9 iron standard solution. Pipette 25.00mL iron standard stock solution (3.8), placed in 250mL volumetric flask, dilute to the mark with water, shake uniform. This solution 1mL containing 100μg iron.4 InstrumentSpectrophotometer. Step 5 Analysis 5.1 Sample Weigh 0.10g sample, accurate to 0.0001g. 5.2 Determination of the number of Two independent measurement averaged. 5.3 blank test Along with the sample (5.1) blank test. 5.4 Determination 5.4.1 The sample (5.1) was placed in 150mL beaker, was added 2.5mL of sulfuric acid (3.2), 2.5g of ammonium sulfate (3.1), covered with a watch glass, in ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 568.2-2008_English be delivered?Answer: Upon your order, we will start to translate YS/T 568.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 568.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 568.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 568.2-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 568.2-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
