YS/T 560-2007 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 560-2007: sting aluminium anodic bar
Status: Valid

YS/T 560: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 560-2007	259	Add to Cart	3 days	sting aluminium anodic bar	Valid
YS/T 560-2006	199	Add to Cart	2 days	(Aluminum ingot)	Obsolete

Similar standards

GB/T 2881   GB/T 1196   YS/T 492   YS/T 447.1   YS/T 626   YS/T 429.1   

Basic data

Standard ID: YS/T 560-2007 (YS/T560-2007)
Description (Translated English): sting aluminium anodic bar
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H61
Classification of International Standard: 77.150.10
Word Count Estimation: 8,857
Date of Issue: 2007-11-14
Date of Implementation: 2008-05-01
Older Standard (superseded by this standard): YS/T 560-2006
Quoted Standard: GB/T 1196; GB/T 3246.2; GB/T 20975; GB/T 7999; GB/T 17432
Regulation (derived from): NDRC Notice No. 77 of 2007
Issuing agency(ies): National Development and Reform Commission
Summary: This standard specifies the cast aluminum anode rod requirements, test methods, test rules, marking, packaging, transportation, storage and contents of the contract. This standard applies to cast aluminum anode rod (hereinafter referred to as the guide rod).

YS/T 560-2007: sting aluminium anodic bar

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
sting aluminium anodic bar ICS 77.150.10 H61 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 560-2006 Cast aluminum anode rod Posted 2007-11-14 2008-05-01 implementation National Development and Reform Commission issued

Foreword

Instead of the standard YS/T 560-2006 "aluminum ingot." This standard YS/T 560-2006 compared to the main changes are as follows. --- Standard name was changed to "cast aluminum anode rod"; --- Standard range "Made with cables and conducting" to "conducting with"; --- Increasing the size 130 × 135; --- Appearance quality, low magnification re provisions; --- Chemical composition sampling method according to the provisions of GB/T 17432 were; --- Chemical analysis method according to the provisions of GB/T 20975 or GB/T 7999 will be; --- Macrostructure examined according to the provisions of GB/T 3246.2 performed. This standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard by the Aluminum Corporation of China Guizhou Branch is responsible for drafting. The main drafters of this standard. Zeng Ping, Tian Weihong, Liu Dongmei, Wen Donghui, Bo Dengcheng door three springs, Zhang Lei, Ren Baifeng. This standard by the National Standardization Technical Committee is responsible for interpretation of non-ferrous metals. This standard replaces the standards previously issued as follows. --- YS/T 560-2006. Cast aluminum anode rod

1 Scope

This standard specifies requirements for cast aluminum anode rod, test methods, inspection rules, marking, packaging, transportation, storage and contract. This standard applies to cast aluminum anode rod (hereinafter referred to as the guide bar).

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1196 aluminum ingots for remelting GB/T 3246.2 Wrought aluminum and aluminum alloy products low fold inspection method GB/T 20975 (all parts), chemical analysis of aluminum and aluminum alloys GB/T 7999 aluminum and aluminum alloys Optical emission spectroscopy method GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method

3 Requirements

3.1 Chemical composition Chemical composition of the guide bar should be consistent with GB/T 1196 in grades A199.60, A199.70, A199.85, A199.90 one corresponding regulations set. Demand side, if there are special requirements, in consultation with the supplier and specified in the contract. 3.2 appearance quality Guide rod surface does not allow cold shut cracks, holes and Use. Slag surface allows trimming, trimming its depth shall not exceed 2mm, trim the edges should be feathered. Jukou burrs and burrs shall be rounded off. 3.3 specifications and dimensions allow deviation Guide rod specifications and size tolerances shall comply with the provisions in Table 1. Table 1 millimeters Thickness × width tolerance Length Length tolerance 100 × 100 ± 3 1100 ~ 1380 0 ~ + 10 130 × 135 ± 3 2000 ~ 2500 0 ~ + 10 Note. Size is not listed in the table may be negotiated in consultation, and specified in the contract. 3.4 low magnification Guide rod low magnification allowed the presence of cracks and pores. Test Method 4 4.1 chemical analysis methods Chemical analysis method according to GB/T 20975 or GB/T 7999 will be. Arbitration chemical composition analysis by The provisions of GB/T 20975 performed. 4.2 appearance quality test methods Appearance quality inspection with visual inspection. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 560-2007_English be delivered?

Answer: Upon your order, we will start to translate YS/T 560-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 560-2007_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 560-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 560-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 560-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.