YS/T 539.1-2024 English PDFYS/T 539.1: Historical versions
Basic dataStandard ID: YS/T 539.1-2024 (YS/T539.1-2024)Description (Translated English): (Chemical analysis method for nickel-based alloy powder - Part 1: Determination of boron content - Phenanthroline spectrophotometry) Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H16 Classification of International Standard: 77.16 Date of Issue: 2024-10-24 Date of Implementation: 2025-05-01 Older Standard (superseded by this standard): YS/T 539.1-2009 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the method for determining the boron content in nickel-based alloy powder by acid-base titration. This standard is applicable to the determination of boron content in nickel-based alloy powder, with a determination range of 1.00% to 20.00%. YS/T 539.1-2009: Methods for chemical analysis of nickel base alloy powder. Part 1: Determination of boron content. Acid-base titration---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for chemical analysis of nickel base alloy powder.Part 1. Determination of boron content.Acid-base titration ICS 77.120.40 H71 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 539.1-2006 Nickel-based alloy powder chemical analysis Part 1. Determination of the amount of boron Acid-base titration Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordYS/T 539 "nickel-based alloy powder chemical analysis method" is divided into 13 parts. --- Part 1. Determination of the amount of boron acid-base titration; --- Part 2. Determination of the amount of chrome aluminum Azure S Spectrophotometry; --- Part 3. Determination of silicon content of perchloric acid dehydration gravimetric method; --- Part 4. Determination of chromium content of ammonium persulfate oxidation titration; --- Part 5. Determination of manganese content of sodium periodate (K) oxidation spectrophotometry; --- Part 6. Determination of iron content of titanium trichloride - potassium dichromate titration; --- Part 7. Determination of cobalt content nitroso R salt spectrophotometric method; --- Part 8. Determination of copper content Neocuproine - chloroform extraction spectrophotometric method; --- Part 9. Determination of copper content of sodium thiosulfate iodometry; --- Part 10. Determination of molybdenum content - Thiocyanate spectrophotometric method; --- Part 11. Determination of cinchonine gravimetric method tungsten content; --- Part 12. Determination of phosphorus content of n-butyl alcohol - chloroform extraction spectrophotometric method; --- Part 13. Determination of oxygen pulse heating inert gas fusion - infrared absorption method. This section is YS/T 539 - Part 1. The partial replacement of YS/T 539.1-2006 "nickel-based alloy powder chemical analysis methods and determination of titration of boron content." This portion of YS/T 539.1-2006 with more significant changes are as follows. --- Increasing the foreword; --- Complements the repeatability limit. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting unit. Beijing Nonferrous Metal Research Institute, West An Ruijian metal limited liability company. This section is drafted. Beijing Nonferrous Metal Research Institute, Steel Research Institute. The main drafters of this section. Yang Ping, Chen Yun red, hemp three clear. This part of the standard replaces the previous editions are. --- GB/T 8638.1-1988; --- YS/T 539.1-2006. Nickel-based alloy powder chemical analysis Part 1. Determination of the amount of boron Acid-base titration1 ScopeYS/T 539 This part specifies the method for determination of nickel-base alloy powder of boron content. This section applies to contain tungsten, molybdenum, nickel-based alloy powder boron content measurement, measurement range. 1% to 6%.2 Method summarySample molten sodium peroxide, hydrochloric acid, sodium sulfite reduction of chromium, alkali separation of iron, chromium, nickel and other elements. The solution was adjusted to neutral with Barium carbonate (Ca) separating aluminum. Mannitol and boric acid complex. Quantitative release of H +, titrated with standard sodium hydroxide solution.3 ReagentsUnless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 sodium peroxide. 3.2 sodium sulfite. 3.3 sodium hydroxide. 3.4 barium carbonate (calcium). 3.5 mannitol. 3.6 hydrochloride (ρ1.19g/mL). 3.7 hydrochloric acid (1 + 20). 3.8 standard titration solution of sodium hydroxide [Ba (NaOH) ≈0.05mol/L]. 3.8.1 preparation. Weigh 2g of sodium hydroxide in 1000mL beaker, add 10mL barium chloride solution (100g/L), boiled for 1min ~ 2min, diluted with water to 1000mL, and mix, put it aside, move the supernatant to a plastic bottle for storage. 3.8.2 Calibration. Weigh 0.3000g 3 copies in advance by 105 ℃ ~ 110 ℃ baking 1h and placed in the dryer to cool to room temperature acid Potassium benchmark reagents, were placed in three 250mL conical flask, add water to dissolve 50mL, plus (2-3) drops of phenolphthalein indicator (3.11), hydrogen Sodium hydroxide standard titration solution (3.8) titration until the solution was just as stable reddish end. 3 parts of sodium hydroxide standard titration solution consumed Volume difference value of the solution should not exceed 0.05mL, averaged. According to formula (1) calculate the standard volumetric sodium hydroxide solution (3.8) of the actual concentration. Ba 0 = Vp 0 × 204.2 (1) Where. Ba 0 --- the actual concentration of standard solution of sodium hydroxide, in units of moles per liter (mol/L); V0 --- titrate the average volume of sodium hydroxide standard titration solution consumed in milliliters (mL); 204.2 --- molar mass of potassium hydrogen phthalate, in units of grams per mole (g/mol). 3.9 hydrochloric acid standard titration solution [Ba (HCl) ≈0.05mol/L]. 3.9.1 preparation. Pipette 4.2mL hydrochloric acid (3.6) in 1000mL volumetric flask, dilute with water to volume, and mix. 3.9.2 Calibration. Pipette 3 parts 25.00mL standard volumetric hydrochloric acid solution (3.9) were placed in three 250mL conical flask, add 50mL ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 539.1-2024_English be delivered?Answer: Upon your order, we will start to translate YS/T 539.1-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 539.1-2024_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 539.1-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 539.1-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 539.1-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
