YS/T 529-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 529-2009: Zironium-Aluminum alloy powder for getter
Status: Valid

YS/T 529: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 529-2009	139	Add to Cart	3 days	Zironium-Aluminum alloy powder for getter	Valid
YS/T 529-2006	279	Add to Cart	3 days	Zirconium-Aluminium alloy powders for getter	Obsolete

Similar standards

JB/T 10766   GB/T 6883   GB/T 3462   YS/T 553   YS/T 552   YS/T 503   

Basic data

Standard ID: YS/T 529-2009 (YS/T529-2009)
Description (Translated English): Zironium-Aluminum alloy powder for getter
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H72
Classification of International Standard: 77.160
Word Count Estimation: 5,533
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Older Standard (superseded by this standard): YS/T 529-2006
Quoted Standard: GB/T 1480; GB/T 5314; GB/T 8763; YB/T 5320
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies: Zirconium aluminum powder suction requirements, test methods, inspection rules and signs, packaging, transportation, storage and purchase order (or contract) content. This standard applies to the consumable arc melting or vacuum induction furnace melting zirconium alloy ingots, crushing, grinding obtained zirconium aluminum powder. Can be used for tubes, electric light source device, inert gas purification, alkali metal releaser reductant and production of zirconium alloy composite getter strip and other elements getter material.

YS/T 529-2009: Zironium-Aluminum alloy powder for getter

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Zironium-Aluminum alloy powder for getter ICS 77.160 H72 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 529-2006 Inhale zirconium aluminum powder Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

Instead of the standard YS/T 529-2006 "getter with zirconium aluminum powder." This standard YS/T 529-2006 compared to the main changes are as follows. --- Increased inspiratory phase requirements; --- Removed Appendix A, reference to GB/T 8763. This standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard was drafted. Technical and Economic Research Institute of Nonferrous Metals, Beijing Optoelectronic Materials Co., Irene. The main drafters of this standard. Chen Yutian, Xu Jinxiang, Lin Ruhai. This standard replaces the standards previously issued as follows. --- GB/T 6452-1986; --- YS/T 529-2006. Inhale zirconium aluminum powder

1 Scope

This standard specifies requirements for suction zirconium aluminum powder, test methods, inspection rules and signs, packaging, transportation, storage and purchase order (or contract details. This standard applies to the consumable arc melting or high-frequency vacuum induction furnace zirconium alloy ingots, after crushing, grinding the resulting aluminum zirconium Alloy powder. It can be used for tubes, electric light source device, an inert gas purification, an alkali metal release the reductant and production inhale zirconium aluminum complex Timber and other raw materials together with the suction device.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement on this standard is Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1480 Determination of particle size metal powder dry sieving GB/T 5314 sampling method powder metallurgy GB/T 8763 NEG materials and products suction performance test method YB/T 5320 metal material quantitative phase analysis of X-ray diffraction K value method

3 Requirements

3.1 Categories Depending on the size of products, divided into four models (Table 1). Table 1 Example model size range/mm Usage XQF1 0.841 ~ 2.38 (+20 mesh to -8 mesh) inert gas purification XQF2 0.044 ~ 0.149 (+325 mesh to -100 mesh) pressing the suction belts, rings, tablets XQF3 0.053 ~ 0.074 (+270 mesh to -200 mesh) the reducing agent is an alkali metal release XQF4 < 0.037 (-400 mesh) tubes, special light bulbs sucking NOTE. Model representation. inhale powder represented by XQF digit represents a different particle size ranges. 3.2 Chemical composition Chemical composition of the product shall comply with the provisions of Table 2. Table 2 Chemical composition mass fraction /% Principal component impurity element of not more than Zr Al Fe Si Ca P Cl S Balance 15.0 16.5 0.20 0.20 0.01 0.005 0.20 0.01 3.3 size Quantity beyond its range of particle size should be less than 5%. 3.4 suction performance An inner diameter of 6.8mm, an outer diameter of 11.0mm, a height of 1.1mm stainless steel inner ring, pressed into XQF2 type powder 100mg. in ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 529-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 529-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 529-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 529-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 529-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 529-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.