YS/T 447.3-2025 English PDFYS/T 447.3: Historical versions
Basic dataStandard ID: YS/T 447.3-2025 (YS/T447.3-2025)Description (Translated English): Alloy wires for grain refinement of aluminum and aluminum alloys - Part 3: Aluminum-titanium alloy wires Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H61 Classification of International Standard: 77.150.10 Date of Issue: 2025-04-10 Date of Implementation: 2025-11-01 Older Standard (superseded by this standard): YS/T 447.3-2011 Issuing agency(ies): Ministry of Industry and Information Technology YS/T 447.3-2011: Alloy wires used for the grain refiner for aluminium and aluminium alloys. Part 3: Al-Ti wires---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Alloy wires used for the grain refiner for aluminium and aluminium alloys.Part 3. Al-Ti wires ICS 77.150.10 H61 People's Republic of China Nonferrous Metals Industry Standard Aluminum and aluminum alloy wire Grain Refinement Part 3. Aluminium - Titanium Wire Part 3. Al-Tiwires Issued on. 2011-12-20 2012-07-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordYS/T 447 "aluminum and aluminum alloy grain refiner wire" is divided into three parts. --- Part 1 aluminum - titanium - boron alloy wire; --- Part 2 aluminum - titanium - carbon alloy wire; --- Part 3 aluminum - titanium alloy wire. This section YS/T Part 3 447. This section drafted in accordance with GB/T 1.1-2009 given rules. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is responsible for drafting unit. Nova Chemical Metallurgy Materials (Shenzhen) Co., Ltd. Participated in the drafting of this section. Northeast Light Alloy Co., Ltd., Southwest Aluminum (Group) Co., Ltd., Central South University. The main drafters of this section. Xuemin, Liu Yueming, Wu Xinfeng, Lv Xinyu, swim the ocean, Wei Zhihong, ZHANG Sheng-hua, Hanwha, Teng Shiki. Aluminum and aluminum alloy wire Grain Refinement Part 3. Aluminium - Titanium Wire1 ScopeYS/T 447 provisions of this part of the continuous casting and rolling, extrusion and other methods for producing cast aluminum - titanium alloy wire requirements, test methods, inspection regulations The marking, packaging, transportation, storage and quality certificate with your order (or contract) content. This section applies to the deformation of aluminum and aluminum ingot casting and casting with aluminum - titanium alloy wire (hereinafter referred to as wire).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 228 metal materials at room temperature tensile test method GB/T 3199 aluminum and aluminum alloy products - Packing, marking, transportation and storage GB/T 7999 aluminum and aluminum alloys Optical emission spectroscopy method GB/T 16865 wrought aluminum, magnesium and their alloys processed products tensile test specimens GB/T 17432 Wrought aluminum and aluminum alloy chemical analysis sampling method GB/T 20975 (all parts), chemical analysis of aluminum and aluminum alloys GB/T 27677 Aluminum Master Alloy YS/T 447.1-2011 aluminum and aluminum alloy grain refiner wire - Part 1. aluminum - titanium - boron alloy wire YS/T 600 aluminum and aluminum liquid hydrogen measuring method closed loop method3 Requirements3.1 grade specifications When the wire grades, as shown in Table 1, the demand side needs the other grades, specifications of wire, after consultation by both parties in the order (or Contract) specifically indicated. Table 1 Trademark Specifications/mm An inner diameter of the roll outer diameter roll diameter high volume AlTi6A AlTi10A 9.5 750 360 280 3.2 tag example Wire mark indicates the order product name, standard number, grade and diameter. Tag example as follows. Example 1. AlTi6A grade, 9.5mm diameter wire tagged. Wire YS/T 477.3-AlTi6A-φ9.5 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 447.3-2025_English be delivered?Answer: Upon your order, we will start to translate YS/T 447.3-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 447.3-2025_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 447.3-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 447.3-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 447.3-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
