YS/T 399-2013 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 399-2013: Sponge hafnium Status: Valid YS/T 399: Historical versions
Basic dataStandard ID: YS/T 399-2013 (YS/T399-2013)Description (Translated English): Sponge hafnium Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H63 Classification of International Standard: 77.150.99 Word Count Estimation: 7,718 Older Standard (superseded by this standard): YS/T 399-1994 Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 52, 2013; industry standard for filing Notice No. 1 of 2014 (No. 169 overall) Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the sponge pick up the requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality certificates and contracts (or purchase orders) and so on. This standard applies to lead tetrachloride by YS/T 399-2013: Sponge hafnium---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sponge hafnium ICS 77.150.99 H63 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 399-1994 Sponge hafnium Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard YS/T 399-1994 "hafnium sponge." Compared with this standard YS/T 399-1994, the following main changes. --- Adds a new industrial grade HHf-1; --- Modifications for grades HHf-01 chemical composition; --- Specifies the method for determining the content of hafnium; --- Improved hafnium sponge chemical analysis sampling method; --- Increased granularity test methods sponge hafnium; --- Increasing the size and appearance quality sampling rule; --- Increasing the product logo; --- Increased orders (or contract) content. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard was drafted. Beijing Nonferrous Metal Research Institute, the country's nuclear Po Titanium Zirconium AG. The main drafters of this standard. Luoyuan Hui, Wang Lijun, Marvin, Chen Yang, Yue strong, small car Kui, Huang Zhang, Yu Hai Hui, Zhang Shunli. This standard replaces the standards previously issued as follows. --- YB772-1970; --- YS/T 399-1994. Sponge hafnium1 ScopeThis standard specifies the sponge hafnium requirements, test methods, inspection rules and signs, packaging, transportation, storage and quality certificate and contract (or Orders) and so on. This standard applies to hafnium tetrachloride by magnesium reduction, produced by vacuum distillation of hafnium sponge.2 Requirements2.1 Categories Hafnium sponge use is divided into atomic energy and industrial grade two grades. HHf-01, HHf-1. 2.2 Chemical composition 2.2.1 hafnium sponge chemical composition shall comply with the requirements of Table 1. Table 1 Industrial product level atomic level Grades HHf-01 HHf-1 Hf content of not less than 96-- Impurity content (mass fraction Number), not more than Zr 3.0 - Al 0.015 0.050 Co 0.001 - Cr 0.010 0.050 Na 0.002 - Mg 0.080 - Mn 0.003 - Cu 0.005 - Fe 0.050 0.075 Mo 0.001 - Ni 0.005 - Nb 0.010 - Ta 0.020 - Pb 0.001 - Cd 0.0001 - Sn 0.005 - Ti 0.010 0.050 ...... |
