YS/T 360.6-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 360.6-2024	RFQ	ASK	3 days	(Chemical analysis methods for ilmenite concentrate - Part 6: Determination of the content of impurities - Inductively coupled plasma atomic emission spectrometry)	Valid
YS/T 360.6-2011	279	Add to Cart	3 days	Methods of chemical analysis for ilmenite concentrate. Part 6: Determination of calcium oxide, magnesium oxide, phosphorus content. Inductively coupled plasma atomic emission spectrometry	Obsolete

Basic data

Standard ID: YS/T 360.6-2024 (YS/T360.6-2024)
Description (Translated English): (Chemical analysis methods for ilmenite concentrate - Part 6: Determination of the content of impurities - Inductively coupled plasma atomic emission spectrometry)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H14
Classification of International Standard: 77.120.50
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 360.6-2011
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the method for determining the content of impurity elements in ilmenite concentrate by inductively coupled plasma atomic emission spectrometry. This standard is applicable to the determination of the content of impurity elements in ilmenite concentrate.

YS/T 360.6-2011: Methods of chemical analysis for ilmenite concentrate. Part 6: Determination of calcium oxide, magnesium oxide, phosphorus content. Inductively coupled plasma atomic emission spectrometry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods of chemical analysis for ilmenite concentrate. Part 6. Determination of calcium oxide, magnesium oxide, phosphorus content.Inductively coupled plasma emission spectrometry ICS 77.120.90 H64 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 360-1994 Chemical analysis of ilmenite concentrates Part 6. determination of calcium oxide, magnesium oxide and phosphorus Plasma emission spectrometry Part 6. Determination ofcalciumoxide, magnesiumoxide, phosphoruscontent- 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

YS/T 360 "ilmenite concentrate chemical analysis method" is divided into six parts. - Part 1. Determination of titanium dioxide - Ammonium sulfate titration; - Part 2. Determination of total iron content - Potassium dichromate titration; - Part 3. Determination of the amount of ferrous oxide - Potassium dichromate titration; - Part 4. Determination of the amount of alumina - EDTA titration; - Part 5. Determination of silicon dioxide - Mo - Mo - blue spectrophotometric method; Part 6. Determination of calcium oxide, magnesium oxide, and phosphorus content - Plasma emission spectrometric method. This section is part 3 of YS/T 360. This part replaces the third part of the YS/T 360-1994 "Chemical Analysis Method for Concentrate of Ilmenite (Sand))" (formerly YB878-76) & Quot; Measurement & quot; and & quot; Determination of Calcium Oxide, Magnesium Oxide. & Quot; Compared with YS/T 360-1994, the main changes are as follows. Simultaneous determination of calcium oxide, magnesium oxide and phosphorus in the sample by plasma emission spectrometry (ICP-AES) --- using platinum crucible sand bath hydrofluoric acid, perchloric acid dissolved samples; --- increase the repeatability limit. This part is the national nonferrous Metals Standardization Technical Committee (SAC/TC243). This part of the drafting unit. Zunyi Titanium Co., Ltd., Jinchuan Group Co., Ltd., Yunnan Xinli Nonferrous Metals Co., Ltd., Fushun Titanium Industry Co., Ltd., China Nonferrous Metals Industry Standard Measurement Quality Institute. The main drafters of this part. Yang Xuexin, Xiang Lunqiang, Qu Xinwei, Yu Shengjie, Zhang Jiangfeng, Zhang Jian, Zhuang Jun. This part of the previous version of the standard to replace the release of the situation. --- YB878-1976; --- YS/T 360-1994. Chemical analysis of ilmenite concentrates Part 6. determination of calcium oxide, magnesium oxide and phosphorus Plasma emission spectrometry

1 Scope

This section specifies the determination of calcium oxide, magnesium oxide, and phosphorus in ilmenite concentrates. This part is applicable to the determination of calcium oxide, magnesium oxide and phosphorus in ilmenite concentrate. Determination of 0.02% to 2.00% of calcium oxide; oxygen Magnesium 0.02% ~ 3.00%; phosphorus 0.001% ~ 0.10%.

2 method summary

The sample was dissolved in perchloric acid and hydrofluoric acid in a platinum crucible and heated to take a strong perchlorate. Removed, slightly cold after adding hydrochloric acid dissolved salt, Diluted to a certain volume. Under certain conditions, with the inductively coupled plasma emission spectrometer, measured at the wavelength of the recommended analysis of Ca, Mg, P and other elements of the emission intensity, according to the working curve method to calculate the sample of calcium oxide, magnesium oxide, phosphorus, the mass fraction of the determination of result.

3 reagent

3.1 hydrofluoric acid (ρ about 1.15 g/mL). 3.2 perchloric acid (ρ approx. 1.76 g/mL). 3.3 Hydrochloric acid (ρ approx. 1.19 g/mL). 3.4 nitric acid (ρ about 1.40 g/mL). 3.5 Sulfuric acid (1 1). 3.6 Sodium hydroxide (100 g/L). 3.7 Hydrochloric acid (1 1). 3.8 Calcium standard storage solution. Weigh 0.2497g calcium carbonate reference reagent (pre-drying at 105 ℃ ~ 110 ℃ for 1h, and placed in the dry Cooling to room temperature) in a 300 mL beaker, add water 20 mL, add hydrochloric acid (3.3) to complete dissolution, and then over 10 mL, To CO2, after cooling into the 100mL volumetric flask, diluted with water to the mark, shake. This solution contains 1 mL of 1.0 mg of calcium. 3.9 magnesium standard storage solution. Weigh 1.6658g at 800 ℃ ± 50 ℃ burning to constant weight of the reference reagent magnesium oxide, dissolved in 2.5mL salt Acid (3.3) and a small amount of water, into the 1000mL volumetric flask. Diluted with water to the mark, mix. This solution contains 1 mg of 1.0 mg of magnesium. 3.10 phosphorus standard storage solution. Weigh 0.43937g potassium dihydrogen phosphate reference reagent (pre-105 ℃ ~ 110 ℃ bake for 2h, and set Cooled to room temperature in a desiccator), placed in a.200 mL beaker, dissolved in water, transferred to a 100 mL volumetric flask, diluted with water to a scale, Mix well. This solution contains 1 mg of 1.0 mg of phosphorus. 3.11 Mixed standard solution. Remove 25.00mL calcium, magnesium standard storage solution, 2.5mL phosphorus standard storage solution, placed in 250mL Volume flask, add 10mL hydrochloric acid (3.7), diluted with water to the mark. This solution 1mL containing 10μg of phosphorus, 100μg of calcium and magnesium.

4 equipment

Inductively coupled plasma emission spectrometer with hydrofluoric acid injection system. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 360.6-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 360.6-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 360.6-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 360.6-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 360.6-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 360.6-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.