YS/T 325.2-2009 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 325.2-2009: Methods for chemical analysis of nickel-copper alloy. Part 2: Determination of copper content. Electrolysis weight method

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 325.2-2009	209	Add to Cart	3 days	Methods for chemical analysis of nickel-copper alloy. Part 2: Determination of copper content. Electrolysis weight method

Similar standards

YS/T 252.6   GB/T 3884.2   GB/T 3884.1   YS/T 325.3   YS/T 325.4   YS/T 325.1   

Basic data

Standard ID: YS/T 325.2-2009 (YS/T325.2-2009)
Description (Translated English): Methods for chemical analysis of nickel-copper alloy. Part 2: Determination of copper content. Electrolysis weight method
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H13
Classification of International Standard: 77.120.40
Word Count Estimation: 6,674
Date of Issue: 2009-12-04
Date of Implementation: 2010-06-01
Older Standard (superseded by this standard): YS/T 325-1994
Regulation (derived from): MIIT [2009] No. 66
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the nickel- copper alloys Determination of copper content. This standard applies to nickel-copper alloy of copper content, Measuring range: 15. 00% to 50. 00 %

YS/T 325.2-2009: Methods for chemical analysis of nickel-copper alloy. Part 2: Determination of copper content. Electrolysis weight method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of nickel-copper alloy.Part 2. Determination of copper content.Electrolysis weight method ICS 77.120.40 H13 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 325-1994 Nickel-copper alloys - Part 2. Determination of copper content - Gravimetric method electrolysis Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

YS/T 325-2009 "nickel-copper alloy chemical analysis method" a total of six sections. --- Part 1. Determination of nickel content Na2EDTA titration --- Part 2. Determination of copper content - Gravimetric method electrolysis --- Part 3. Determination of iron content by flame atomic absorption spectrometry --- Part 4. Determination of manganese content by flame atomic absorption spectrometry --- Part 5. Determination of aluminum content Na2EDTA titration --- Part 6. Determination of titanium content security for DAM spectrophotometry This section YS/T Part 2 325. The partial replacement of YS/T 325-1994 Determination of copper content in "nickel-copper alloy (NCu28-2.5-1.5) Methods for chemical analysis." This section compared with YS/T 325-1994, the main changes are as follows. --- Specifies the determination of the scope of the method. --- The sample was dissolved nitrate - mixed sulfuric acid, nitric acid instead - hydrofluoric acid. --- Increase the determination of residual copper content, incorporation assay results. --- Supplementary terms of quality assurance and control, increased precision terms. The non-ferrous metal part by the National Standardization Technical Committee and centralized. This section is responsible for drafting unit. aluminum Shenyang Nonferrous Metals Processing Co., Ltd. Participated in the drafting of this section. Guangzhou Nonferrous Metal Research Institute, Ltd. high-tech copper sheets. The main drafters of this section. Sun Aiping, Li Yamin, wide Jin Lee, Dai Fengying, Guo Min, Zhang Jin, Xu Ye. This part of the standard replaces the previous editions are. --- YB596-65, YS/T 325-1994. Nickel-copper alloys - Part 2. Determination of copper content - Gravimetric method electrolysis

1 Scope

YS/T in this part 325 specifies the method for determination of nickel-copper alloy of copper content. This section applies to the determination of nickel-copper alloy of copper content. Measurement range. 15.00% - 50.00%.

2 principle of the method

Sample dissolved in nitric acid and hydrofluoric acid, the hydrogen peroxide reduction of nitrogen oxides electrodeposited copper. Join the platinum anode lead losses Reduce to a minimum, the electrolytic copper deposited on the platinum cathode, dried and weighed. The amount of residual copper electrolyte by atomic absorption spectrometry.

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 ethanol. 3.2 Hydrofluoric acid (ρ1.13g/mL). 3.3 nitric acid (1 + 1). 3.4 Hydrogen peroxide (1 + 9). 3.5 ammonium chloride solution (0.02g/L). 3.6 lead nitrate solution (10g/L). 3.7 copper standard stock solution. Weigh 1.0000g copper (mass fraction of copper ≥99.99%), placed in 250mL beaker, add 40mL of nitric acid (3.3), cover sheet pan, heated until completely dissolved, boiled to remove nitrogen oxides, washed with water and dish table cup wall, cooling. Moved 1000mL volumetric flask, dilute with water to volume, and mix. 1mL solution containing 1mg of copper. 3.8 Copper Standard Solution. Pipette 10.00mL copper standard stock solution (3.7), placed in 500mL volumetric flask, 10mL of nitric acid was added Diluted (3.3) with water to volume, and mix. This solution 1mL containing 20μg copper.

4 Instrument

4.1 250mL teflon beaker. 4.2 pairs sectional polytetrafluoroethylene sheet pan. 4.3 with automatic stirring device and a precision DC ammeter, voltmeter electrolyzer. 4.4 platinum cathode. with a diameter of about 0.11mm ~ 0.12mm platinum wire, woven into 52 holes per square centimeter mesh screen made of mesh cylinder shape. See Figure 1. 4.5 platinum anode. spiral. See Figure 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 325.2-2009_English be delivered?

Answer: Upon your order, we will start to translate YS/T 325.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 325.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 325.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.