YS/T 3022-2013 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 3022-2013: Technical specification for test work of whole ore gold leaching with cyanide Status: Valid
Basic dataStandard ID: YS/T 3022-2013 (YS/T3022-2013)Description (Translated English): Technical specification for test work of whole ore gold leaching with cyanide Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: D46 Classification of International Standard: 77.150.01 Word Count Estimation: 9,929 Quoted Standard: GB 8978; GB 18597; GB/T 20899.1; GB/T 20899.2; GB/T 20899.3; GB/T 20899.4; GB/T 20899.5; GB/T 20899.6; GB/T 20899.7; GB/T 20899.8; GB/T 20899.9; GB/T 20899.10; GB/T 20899.11; YS/T 3003; YS/T 3017 Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 52, 2013; industry standard for filing Notice No. 2 of 2014 (No. 170 overall) Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies: gold ore cyanidation leaching gold test technical requirements. This standard applies to: gold ore cyanidation leaching gold test. YS/T 3022-2013: Technical specification for test work of whole ore gold leaching with cyanide---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Technical specification for test work of whole ore gold leaching with cyanide ICS 77.150.01 D46 People's Republic of China Gold Industry Standards Full gold ore mud cyanide leaching test specification Issued on. 2013-10-17 2014-03-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Gold Association. This standard by the National Gold Standardization Technical Committee (SAC/TC379) centralized. This standard was drafted. Changchun Gold Research Institute, Shandong Gold Group Corporation, Zijin Mining Limited. The main drafters of this standard. Yang Feng, Wang Deyu, Wang Yanrong, Zou to Chang, Mu Guo-hong, Li Guangsheng, Blue Miho, accounting Liao Pi, Guozhao Song. Full gold ore mud cyanide leaching test specification1 ScopeThis standard specifies the technical requirements of gold-bearing ore and all slime cyanidation leaching gold trials. This standard applies to the whole mud gold ore cyanide leaching tests.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 8978 Integrated Wastewater Discharge Standard GB 18597 Hazardous Waste Storage Pollution Control Standard GB/T 20899 (all parts) Methods for chemical analysis of gold ores YS/T 3003 gold-bearing ore specification test sample preparation YS/T 3017 gold Industrial solid sodium cyanide Safety Management Technical Specifications3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Gold ore gold-bearingore Collected from the bed containing gold mine ore. 3.2 Cyanide ore gold-bearingmaterialbeforecyanideleaching Gold material into the gold leaching operation before, referred to the original cyanide. 3.3 All slime cyanidation wholeorecyanidation Directly in line with a certain concentration, fineness, alkalinity pulp requirements are fully cyanide leaching process. 3.4 Cyanide leaching cyanideleaching The process of dissolving gold in cyanide solution containing oxygen. 3.5 Grinding fineness grindingfineness After grinding a certain level of material small percentage. 3.6 Alkali treatment alkalitreatment Stirring to make pulp stabilized at a certain alkalinity before cyanide leaching process with an alkaline solution. 3.7 Leaching time leachingtime Leaching process starts to the end of the leaching process used in time. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 3022-2013_English be delivered?Answer: Upon your order, we will start to translate YS/T 3022-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 3022-2013_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 3022-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |