YS/T 293-2011 English PDFUS$389.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 293-2011: Sintered hardmetal blanks used in heading die for standard bolt Status: Valid YS/T 293: Historical versions
Basic dataStandard ID: YS/T 293-2011 (YS/T293-2011)Description (Translated English): Sintered hardmetal blanks used in heading die for standard bolt Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H72 Classification of International Standard: 77.160 Word Count Estimation: 15,190 Date of Issue: 2011-12-20 Date of Implementation: 2012-07-01 Older Standard (superseded by this standard): YS/T 293-1994 Quoted Standard: GB/T 5242; GB/T 5243 Regulation (derived from): ?MIIT Announcement 2011 No.43 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the standard bolt upsetting dies with carbide blanks requirements, test methods, inspection rules, signs, packaging, transport, storage, quality certificates and contracts (or purchase orders) content. This standard applies to standard carbide blanks upsetting die bolts used. YS/T 293-2011: Sintered hardmetal blanks used in heading die for standard bolt---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sintered hardmetal blanks used in heading die for standard bolt ICS 77.160 H72 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 293-1994 Standard Carbide Upsetting Mold Carbide Blanks 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces YS/T 293-1994 "Standard Carbide Upsetting Mold Carbide Blank", this standard and YS/T 293-1994 phase The main changes are as follows. --- modified the model that rules; --- adjust the size of the allowable deviation, and increase the requirements of the outer diameter of the poor; --- increase the rough round and the hole roundness requirements; --- increase the rough coaxial requirements; --- increase the depth of the upper and lower end of the blank hole requirements; --- Added the contents of the certificate of quality and the contents of the contract (or order). This standard is proposed by the National Committee for Standardization of Nonferrous Metals (SAC/TC243). This standard is responsible for drafting units. Zhuzhou Cemented Carbide Group Co., Ltd., Xiamen Jinlu Special Alloy Co., Ltd. The main drafters of this standard. Zhang Shiping, Yang Jianguo, Wu Gaochao, Wu Jianbing, Zhao Shengzhi, Zou Jianping, Liang Hong. This standard has been released as follows. --- YS/T 293-1994. Standard Carbide Upsetting Mold Carbide Blanks1 ScopeThis standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of rigid alloy blanks for standard bolt upsetting molds. Deposit, quality certificate and contract (or order) content. This standard applies to the standard bolt upsetting mold carbide blank.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Test rules and test methods for cemented carbide products GB/T GB/T 5243 Carbide products are marked, packaged, transported and stored3 request3.1 Model indicates rule Standard Carbide Upsetting mold Carbide blank consists of four parts. category code (BD), inner diameter (d), outer diameter (D) and height (H). Example. With a diameter of 4.6mm, diameter of 22.0mm, height of 25.0mm standard bolt upsetting mold carbide model used as the blank. BD4.6 × 22.0 × 25.0 3.2 Model and size Standard bolted upsetting mold with carbide rough Figure 1, model see Table 1. figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 293-2011_English be delivered?Answer: Upon your order, we will start to translate YS/T 293-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 293-2011_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 293-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 293-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 293-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
